Best Redwood SBB-171148NS Operating instructions

Assembly instructions for Solid Benches

Step 1.- Locate Seating, 2 Legs and 1 support piece. As well as,

hardware kit. (Screws, bolts, etc).

Step 2.- Position legs into its place at the sides of the seating, and

introduce carriage bolts & screws to tighten them together.

Step 3.- Finally, place the Support piece into place, and introduce the

wood screws to tighten. (note: holes are pre-drilled, be careful in this

step)

Note: align using the numbers printed on each part and use the

following pictures for support.

This manual is also suitable for

Download PDF