BRD-355

Westermo BRD-355 Firmware

  • Hello! I am an AI chatbot trained to assist you with the Westermo BRD-355 Firmware. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1(6)
Copyright © 2016 Westermo Teleindustri AB
BRD-355 Firmware
Release Notes
Version 1.7.6.19
Version 1.7.6.19 (Build-date: 2019-03-22)
General
This release includes enhancements and bug fixes.
New Feature(s)
None.
Enhancement(s)
DHCP: Added custom default route option.
DHCP added relay functionality.
RIP: Added option to disable advertising default route.
Improved logging.
Updated OpenVPN.
OpenVPN: added configuration import.
Improved reporting of DSL Statistics.
Bug Fixes
Resolved an issue with VRRP invalid packet causing restart.
Resolved issue with constant SNMP walk causing restart.
Resolved issue with L2TP not starting correctly due to DNS lookup failure.
Removed IPsec 0.0.0.0 messages from logs.
Resolved issue whereby when an active IPsec tunnel was deleted it was not correctly
removed from the status page.
Resolved issue with ADSL only configuration setting not persistent.
Note(s)
None.
Model
BRD-355
Date
2019-03-22
Version
1.7.6.19
Tools
Note
N/A
2(6)
Copyright © 2016 Westermo Teleindustri AB
Version 1.7.6.18 (Build-date: 2019-02-19)
General
This release includes enhancements and bug fixes.
New Feature(s)
None.
Enhancement(s)
Converted Operating mode setting to a DSL Mode setting.
o Dropdown to select VDSL/ADSL mode, VDSL only mode, ADSL only mode.
Improved selection of DSL interface firmware based on connection type.
Legacy ADSL mode now disabled by default.
Bug Fixes
Resolved an issue with infrequent configuration read error on boot.
Resolved an issue with restarting after power glitches.
Resolved issue preventing IPSec tunnels from being enabled/disabled via the web VPN page.
Resolved a bug which restarted the DSL line even when there were no physical parameter
changes.
Resolved issue of limiting the establishment time out to be 15 seconds.
Fixed "Poll on connection establishment, period" value in connection management not being
saved.
Clean up valid interfaces lists.
Note(s)
None.
Version 1.7.6.17 (Build-date: 2018-12-06)
General
Westermo strongly advices all customers to upgrade to this version.
This release includes bug fixes.
New Feature(s)
None.
Enhancement(s)
None.
Bug Fixes
Fixed issue with OpenVPN static address not persisting through boot.
Note(s)
None.
Version 1.7.6.16 (Build-date: 2018-10-03)
General
Westermo strongly advices all customers to upgrade to this version.
This release includes enhancements and bug fixes.
New Feature(s)
3(6)
Copyright © 2016 Westermo Teleindustri AB
None.
Enhancement(s)
Improved connection management.
Added Sync Speed indicators.
Security enhancements.
Bug Fixes
Correctly terminate OpenVPN when disabled.
Correctly display NAT ranges for target address and netmask in Custom NAT
Note(s)
None
Version 1.7.6.15 (Build-date: 2018-06-07)
General
Westermo strongly advices all customers to upgrade to this version.
This release includes enhancements and bug fixes.
New Feature(s)
None.
Enhancement(s)
Added VDSL re-transmission capability.
Improved ADSL/VDSL inventory strings.
Added support for hardware variant.
Bug Fixes
None.
Note(s)
None
Version 1.7.6.14 (Build-date: 2018-03-12)
General
Westermo strongly advices all customers to upgrade to this version.
This release includes enhancements and bug fixes.
New Feature(s)
None.
Enhancement(s)
DHCP - Support for option 60 added.
VRRP - Status available in SNMP.
VRRP - Added hold-off timer.
Added support for VLAN over ADSL.
Bug Fixes
Inventory strings - Serial number reported correctly.
VRRP - Fixed issue when unit becomes master.
4(6)
Copyright © 2016 Westermo Teleindustri AB
Fixed issue where DSL interface was not present on the firewall settings page.
Bridging issue resolved.
WeConnect issues resolved.
Note(s)
Known issues that are under investigation:
o VRRP in scenarios where unit is configured as backup, management access is
blocked when VRRP is enabled, the device can be accessed for a short time after a
reboot.
Version 1.7.6.13 (Build-date: 2017-12-01)
General
Westermo strongly advices all customers to upgrade to this version.
This release includes bug fixes.
New Feature(s)
None.
Enhancement(s)
None.
Bug Fixes
Fixed Port Forwarding issue.
Fixed WeConnect/RIP issue.
Fixed bug related to CLI command: ifaces.
Fixed xDSL-interface Restart issue.
Fixed IPoE DHCP issue.
Note(s)
Known issues that are under investigation:
o VRRP in some scenarios management access is blocked when VRRP is enabled,
the device can be accessed for a short time after a reboot.
o When xDSL-interface is not up, the xDSL-interface is not listed on the
FirewallAccess Control page.
Version 1.7.6.12 (Build-date: 2017-10-05)
General
First full release for the BRD-355.
New Feature(s)
None.
Enhancement(s)
None.
Bug Fixes
None.
Note(s)
5(6)
Copyright © 2016 Westermo Teleindustri AB
Listed below are a number of issues that are known in this version. An investigation to fix
these issues is in progress.
o Port forwarding in some scenarios a port forwarding rule is not saved after
configuration and the device may reboot.
o VRRP in some scenarios management access is blocked when VRRP is enabled,
the device can be accessed for a short time after a reboot.
o WeConnect/RIP under some circumstances the device must be rebooted to ensure
full functionality of WeConnect/RIP.
6(6)
Copyright © 2016 Westermo Teleindustri AB
Contact Westermo technical support
If you have technical questions about this product that are not answered in this document,
you are welcome to contact Westermo.
International
www.westermo.com
support@westermo.se
Phone: +46 16 42 80 00
Fax: +46 16 42 80 01
France
www.westermo.fr
support@westermo.fr
Phone: +33 1 69 10 21 00
Fax: +33 1 69 10 21 01
Germany
www.westermo.de
support@westermo.de
Phone: +49 7254 9540 00
Fax: +49 7254 9540 09
Sweden
www.westermo.se
support.sverige@westermo.se
Phone: +46 21 548 08 00
Fax: +46 21 35 18 50
United Kingdom
www.westermo.co.uk
technical@westermo.co.uk
Phone: +44 1489 580 585
Fax: +44 1489 580 586
Singapore
www.westermo.com.sg
sales@westermo.com.sg
Phone: +65 6743 9801
Fax: +65 6745 0670
Taiwan
www.westermo.com
Phone: +886 2 8911 1710
China
www.cn.westermo.com
sales.cn@westermo.com
Phone: +86 21 6145 0400
North America
www.westermo.com
Phone: +1 847 619 60 68
Fax: +1 847 619 66 74
/