2. Robertshaw
  3. Y-54052 Spark Module Kit

Robertshaw Y-54052 Spark Module Kit User manual

  • Hello! I am an AI chatbot trained to assist you with the Robertshaw Y-54052 Spark Module Kit User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
INSTALLATION DATA
Spark Module kit
Customer Service Telephone 1.800.304.6563
Customer Service Facsimile 1.800.426.0804
[email protected]
Robertshaw®, Ranco®, Paragon® and Uni-Line® are
trademarks of Robertshaw, its subsidiaries and/or
affiliated companies. All other brands mentioned
may be the trademarks of their respective owners.
For Technical Service
Telephone 1.800.445.8299
Facsimile 1.630.260.7294
[email protected]
www.uni-line.com
www.robertshaw.com
©2014 Robertshaw
12/14 –1-966 Rev B
This kit will replace any Y-54052-1AF, Y-54052-3AF and Y-54052-4AF module with only minor adaptaon. The chart below lists the terminal
specicaons for each module.
CAUTION:
THIS SPARK MODULE SHOULD BE REPLACED ONLY BY
QUALIFIED SERVICE PERSONNEL. IMPROPER INSTALLATION
CAN PRESENT A HAZARD.
Part No. High Volume Terminals Supply Terminals
Y-54052-1AF .032” x .250” .250”
Y-54052-3AF .032” x .250” .110”
Y-54052-4AF .032” x .110”: .110”
NOTE: Mark all leads as they are removed from the original module so they can be correctly reconnected to the replacement
module. The Robertshaw® Y-54052 kit module has .032” x .250” high voltage terminals and .032” x .250” supply terminals.
If the module you want to replace has dierent size high voltage or supply terminals, the kit includes 4 each of an adaptor to convert
.250” to .110”. To make the conversion push the mang receptacle rmly onto the terminal which needs to be changed. This will
provide the correct size tab for connecon to the range electrodes or power supply.
NOTE: For Proper Operaon:
1. All leads must be reconnected to the new module exactly as originally installed.
2. All receptacles must t the corresponding tabs ghtly enough to maintain good electrical contact, if the module is to funcon
properly. If necessary, receptacles should be crimped slightly to insure proper contact and good electrical connuity.
/