J20C
(600A)
USER MANUAL
Emergency car battery repair call service in my hand
Jump&Go(점프앤고)
Thank you very much for purchasing our J20C.
This product is designed to jump start the engine of
most of the vehicles that use a 12V battery.
Please read carefully through this User Manual and get familiar
with the guidelines and instructions described herein for
proper use of the product.
This product has a built-in function to automatically sense a 12V car battery
so it can be used safely and conveniently. It can also be used as an auxiliary
battery that charges or operates mobile devices and other electronic
products running on a 12V car cigar jack.
Applied vehicle
Vehicles using a 12V battery
Diesel- 4000CC and gasoline (LPG)- 8000CC
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Safety precautions
!
●
We warrant that the product will be free from defects in materials and
workmanship under normal use of one (1) year from the date of purchase
and will be provided of its parts and accessories for three (3) years.
●
Any request for repair or replacement or any claim for compensation
shall be dealt with, together with the details, within seven (7) days
from the date of receipt of such notification and paid within fourteen (14)
from the date of such decision if it is judged to be acceptable.
●
※ The warranty period shall be shortened to three(3) months
in the event the product is used for commercial purpose.
Within warranty period
A major defect occurring within 10 days of the date
of purchase
A major defect occurring within 1 month of the date
of purchase
A defect occurring during transportation following
the purchase of the product
When the product is lost by the dealer after the owner
entrusted him/her with it
When the repair is impossible due to no stock of necessary
parts within their warranted part retention periods
When the repair is still impossible even though necessary
parts are available
A defect following replacement with a new one occurring
within 1 month of such replacement, which requires major repair
When the product experiences the same defect three times
When the product experiences the 5th defect from
different causes
When replacement is impossible
Replacement
or
refund
Not applicable
Not applicable
Not applicable
Not applicable
Not applicable
Charged repair
service
Charged repair
service
Depreciated using the
straight-line method
Refundable at an amoun
t that is depreciated at the
straight-line method
Refundable at the sum of an
amount depreciated at the
straight-line method and
additional 5% of its purchase
price
refundable at 10%
added amount
( )
Replacement
or
refund
Replacement
or
refund
Replacement
or
refund
Replacement
or
refund
Replacement
or
refund
Replacement or free
of charge repair
Replacement
Refund at purchase
price
Refund at purchase
price
Repair service
charged at cost
Subject to our standard
prepared separately
Repair service
charged at cost
Replace it with a new one
after charging an amount
equivalent to that charged
at a paid repair service
Out of warrant period
Out of warrant period
In case of a defect in materials or workmanship
arising under normal use
When a failure is caused by misuse, abuse, or an error by the
user, which includes
●
When a failure arises from other causes, which includ
●
●
●
●
●
●
●
●
Construction
How to use the jump starter J20C
FAQ
Paid repair service
Types of trouble
Free-of-charge service
※ This product is prohibited to be subjected under abnormal
use or to excessive charging. No service will be rendered if it is
related to the abnormal use or excessive charging of the product.
- Careless or negligent handling, or willful dismantling, modification, or alteration
(in which case repair service may not be possible)
- Supply of wrong power or incorrect use of maximum output current
- External impact or fall, or damage by water
- Repair service rendered by a person other than who are not authorized by us.
- Natural disasters (such as lighting, fire, saline water, and flood)
※ Please read carefully through the User Manual as the service
will be charged in the event it is requested when the product is
found not to be defective.
Specification of J20C
Names of components
- The light comes on
- The light flashes fast
- S.O.S signal
- The light goes off
For in-vehicle devices
using 12V cigar jack
12V
For
home-service
adaptor
For 3-in-1
USB charging cable
For smart
jump start service
(J20C Main body)
(Home adapter)
(3 in 1 USB Cable)
(Boost cable designed exclusively for J20C)
How to check with product for state of charge
How to use LED flash lantern
The display lamp starts filling in one after another as charging proceeds.
The lamp goes off when the charging comes to a temporary stop or it is completed.
* Power OFF :
* Press the power button firmly,
and the flash light comes on.
At this time, a press on the power button causes the light
to begin to flash; and another press triggers an S.O.S signal.
One more press will turn off the light.
Make good use of the flash light
when you work at night or you go fishing
or spend time at a campground.
Sequence of light
* Display lamp :
- Be sure to charge the product fully (100%)
when it indicates being charged below 30%
the switch is pressed to check for the stat of charge in this J20C.
it goes off automatically when it is left untouched
after it is used.
A hard press turns on the lantern even when the power is not turned on.
20% 40% 60% 80% 100%
How to charge the product
For charging, connect the connection jack of the home-service adaptor
provided together with the product with the 15V 1A input port of J20C.
(whose lamp starts flashing when the charging proceeds properly.)
Be sure to use the provided charging adapter; otherwise, the charging
is not carried out properly or the product can be damaged.
Never attempt to jump start an engine while the product is being charged.
1.
2.
3.
Beep,Beep
Step 1: Make sure that the blue cable is securely
connected to the socket of the main body and check if the
cable display lamp comes on.
Step 2: Link the red clamp to the positive pole “+”, and then.
Step 3: the black clamp to the negative pole “-“
The connection of the smart jumpstart cable
functions as shown below.
Reference video clips for the use of the product (J20C model)
You can view “How to Use Product” on YouTube.
Beep,Beep
Step 4
Turn the ignition key of the car. When the engine starts,
disconnect the jump cable from the car battery,
and the car is ready to drive.
- Cables are consumables therefore, they may be limited to replacement
or return in the event any damage or defect results from or in connection
with misuse or abuse or carefree or negligent use.
※ Be sure to keep the car running for more than 30 minutes
after the jump start until the car battery is charged.
※ Be advised not to try frequent jump starts or more than
2~3 successive jump starts
(which may result in damage to the product or the cables)
How many times can the product jump start an engine?
: It will be able to jump start an engine about 30 times when it is fully
charged
(which may vary depending on the type of car or surrounding conditions)
Q.
A.
How long does it take to charge a mobile phone using the product?
It takes about 1 hours to charge a fully discharged one
Q.
A.
How long does it take to have J20C fully charged?
It takes a maximum of 4~5 hours to get it fully charged from
the complete discharge (0%).
Q.
A.
What is the service life of J20C?
How long can the product be stored when it fully charged?
My J20C won't be 100% charged.
This product has a lithium-iron-phosphate battery which has a
service life of about 3~5 years
(about 2000 times)which is a maximum
of 4 times as long as those of currently-available lithium ion batteries.
Q.
A.
It can be kept in store for about 6~12 months if it is 100% charged;
however, it is recommended to have it fully charged at least every
3 months. When it is kept in store without being used for longer than
3 months, the state of charge will remain at about 60%.
Q.
A.
Disconnect completely the charging adapter from the mains power
and from the product and then connect them again. If the product is
not fully charged though it goes through the above process, it might
develop a problem. Please contact our customer service center.
Q.
A.
Tell me about “How to Use J20C” on video.
Type in “Jump and Go” in the search box on YouTube, and
you can find video clips from which you can see How to Use Product
and various demonstrations. (Scan the QR code on the back of
your User Manual to visit our site for how to use the product.)
Q.
A.
There is no response even if the switch button is pressed.
The low-voltage protection function may be enabled.
Plug in the adaptor into the 15V/1A input port to get the product
activated or charge the battery before you use it.
Q.
A.
XU101058-17003A
Dimensions
weight
Output
Input
Full charging
time
Operating
temperature
Others
Battery
188 X 134 X 37mm
810g
3.2V / 16,000mAh / 51.2wh
15V/1A
4 to 5 hours
-20℃ ~ 60℃
LED Flash light
5V/1A USB Port,5V/2A USB Port,12V/10A cigar jack
Warranty details
When the product is judged to be irreparable
When the product is judged to be reparable
In case of a defect in materials or workmanship
arising from misuse, abuse, or negligent use
Follow the instructions described in this User Manual.
Refrain from using the product for commercial or
industrial purpose, which may otherwise influence its
performance or shorten its service life.
Make sure to check the “+” and “–” poles before
you use the product.
Prevent the product from being used by children or
the weak and old and keep it out of their reach.
Never use the product in a place where explosive
matter or flammable toxic gases are found.
Be sure not to use accessories other than those provided
by the manufacturer of the importer and to disassemble or
modify or alter the product at your discretion.
Do not turn on the ignition key for long than
10 seconds as prolonged attempts to start the engine
may lead to damage to the cable or the product.
Wait for more than 1 minutes before the next start
when the engine won't start. Wait for longer than 1
minutes before you try again when you are unable
to start the engine with three attempts.
32, Seongseo Buk Ro 5-gil, Daseo-gu, Daegu, Korea
Tel : 1899-4806 / 082-70-4211-3885
Name of the certified company: Elli Eco
Importer: Ener Camp
www.enercamp.kr(Home page)
www.ancomall.co.kr(On-line store)
The contents of this User Manual and the construction and
specification of the product contained herein may be subject to change
without prior notice for the purpose of its improved quality and performance
Green lamp flashing (correct)
Green lamp flashing and warning sound
The light indicates the battery runs low of
power.You are to press the “Boost” button
and wait until the display lamp turns green
and then jump start the engine within
30 seconds.
The light indicates the connection
of the poles “+” and “-“ is correctly
made and it operates properly.
Now, you are ready to jump start
the engine.
The light indicates the connection
of the poles “+” and “-“ is incorrectly
made. Go to Step 2 and connect
the cables correctly.
You can jump start the engine after
you see the light turn green.
Red lamp flashing and
warning sound (reverse)
Quality Warranty
12V 10A cigar jack port
15V 1A charging port
USB 5V 1A charging port
Jump start connection port
USB 5V 2A charging port
Display lamp
Switch
LED Flash Lantern
Avoid giving too much impact to the product or
inadvertently fall on the floor. It is prohibited to
use or charge the product when it receives
impact or get damaged.
Refrain from using or charging the product
when it has been exposed to water or mois-
ture, or when it is in the vicinity of fire or
explosive substances.
Do not place the product close to fire or dare
to set fire to it, which may be exploded. Stop
using the product immediately when it is
found to be swollen. Avoid contacting it
when it gives off smoke or leaks, which may
lead to personal injury.
Do not attempt to dismantle or disassemble
this product, which may otherwise result in the
risk of explosion, fire, or electric shock.
Never try to insert any foreign matter into, or
bring the product in contact with, the input or
output terminal, which may otherwise give rise
to damage to it due to short circuit. Especially,
make sure that no metallic matter should not
come in contact with either of the jump start
terminals, which may otherwise cause damage
to the battery or injury to the user.
The battery built in this product is a lithium
battery. When any leaked liquid contacts the skin,
wash it with soap and water immediately and rinse
it with vinegar. In the event the liquid gets into the
eye, rinse it with water immediately and get an
urgent medical help.
Do not smoke or remove any flammable
substances in the neighborhood while this
product is being charged.
Never apply this product to a frozen battery or a
dead battery.
Check if the poles (+, -) is correctly chosen
when the product is used to jump start an
engine. Reverse connection may give rise to
a failure in the vehicle or the product. Be sure
to keep the product out of the reach of
children.
Use this product at room temperature.
(0-40 ℃)
Do not store this product at extreme tempera-
tures such as below -30oC or above 70℃.
No lamps are lit and there is no warning sound
First, check the battery of the vehicle if it has
been damaged or confirm whether the jump
cables are correctly connected. Press the “Boost”
button and wait until the display lamp turns green
and then jump start the engine within 30
seconds.
Within warranty period
Warranty details
/
