La Mirada, CA tel. 714-736-1000 fax. 714-736-2078 customer service. 800-321-1741 email. [email protected]
CON-TACT LINER
GRIP PRINTS
Non-Adhesive
SURFACE PREPARATION
Clean surfaces prior to application as necessary
All surfaces should be dry, clean, and smooth
CAUTION
Not for use on lacquered or urethane surfaces. Finish damage may occur
Care should be taken when placed on low quality latex semi-gloss and gloss paints as it
can be too soft and have poor print resistance, especially in warm, damp conditions.
Unwanted adhesion may occur when the recommended dry and cure time is not allowed
for the new paint before it is put into service. Cool or humid weather conditions will
require a longer curing time.
APPLICATION
Measure area to be covered
CLEANING AND MAINTENANCE
Washable
Clean by simply wiping the surface with a damp cloth and mild soap if necessary
/
