Con-Tact 08F-C8A48-04 User guide

Category
Equipment cleansing kit
Type
User guide
La Mirada, CA tel. 714-736-1000 fax. 714-736-2078 customer service. 800-321-1741 email. [email protected]
CON-TACT LINER
GRIP PRINTS
Non-Adhesive
SURFACE PREPARATION
Clean surfaces prior to application as necessary.
All surfaces should be dry, clean, and smooth.
CAUTION
Not for use on lacquered or urethane surfaces. Finish damage may occur.
Care should be taken when placed on latex semi-gloss and gloss paints.
Painted areas must be completely cured otherwise the liner may stick to the surface.
Cool and/or humid conditions required a longer curing time.
APPLICATION
Measure area to be covered
Cut to desired size and/or shape
CLEANING AND MAINTENANCE
Washable
Clean by simply wiping the surface with a damp cloth. Mild soap can be used if
necessary.
Hand wash
Do Not Wring
Lay flat to dry
  • Page 1 1

Con-Tact 08F-C8A48-04 User guide

Category
Equipment cleansing kit
Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI