Con-Tact KTCH-CUSM01-06 User guide

La Mirada, CA tel. 714-736-1000 fax. 714-736-2078 customer service. 800-321-1741 email. [email protected]

CON-TACT LINER

UNDERSINK MAT

Non-Adhesive

SURFACE PREPARATION

Clean surfaces prior to application as necessary.

All surfaces should be clean and dry.

CAUTION

Not for use on lacquered or urethane surfaces. Finish damage may occur.

Care should be taken when placed on latex semi-gloss and gloss paints.

Painted areas must be completely cured otherwise the liner may stick to the surface.

Cool and/or humid conditions required a longer curing time.

APPLICATION

Measure area to be covered

Cut to desired size and/or shape

CLEANING AND MAINTENANCE

Washable

For spot cleaning use a damp cloth and mild soap.

May be submerged in water with mild soap or detergent.

Clean liner prior to use in food preparation areas and refrigerators.

Hand wash

Machine dryer should not be used.

Lay flat to dry. Use clean, dry towel to remove excess moisture.

This manual is also suitable for

Download PDF