Con-Tact 04F-C7H33-06 User guide

La Mirada, CA tel. 714-736-1000 fax. 714-736-2078 customer service. 800-321-1741 email. [email protected]

CON-TACT LINER

GRIP PRINTS

Non-Adhesive

SURFACE PREPARATION

Clean surfaces prior to application as necessary

All surfaces should be dry, clean, and smooth

CAUTION

Not for use on lacquered or urethane surfaces. Finish damage may occur

Care should be taken when placed on low quality latex semi-gloss and gloss paints as it

can be too soft and have poor print resistance, especially in warm, damp conditions.

Unwanted adhesion may occur when the recommended dry and cure time is not allowed

for the new paint before it is put into service. Cool or humid weather conditions will

require a longer curing time.

APPLICATION

Measure area to be covered

CLEANING AND MAINTENANCE

Washable

Clean by simply wiping the surface with a damp cloth and mild soap if necessary

Download PDF