TrafficMASTER RGD28 Installation guide

INSTALLATION

“Premium Rug Gripper”

THIS PRODUCT CAN BE USED ON HARD SURFACES

INTALLATION:

- Clean the surface area before laying down the gripper.

- Remove the gripper from its packaging.

- Unfold the gripper and ﬂaen creases.

- Trim to desired size.

- Place the gripper in desired locaon.

WARRANTY:

This warranty applies only to defects. If a defect is discovered in the material the

gripper should not be used and should be returned as defective material.

CARE AND MAINTENANCE DOS:

1. Check the surface underneath the gripper regularly.

2. Clean the surface under the gripper regularly

3. If cleaning is required, wash in warm soapy water and allow to dry

completely before placing back on the surface area.

CARE AND MAINTAINENCE DON’TS:

1. Do not allow any liquid to migrate from the area rug to the gripper

underneath.

2. Do not allow pet urine, carbonated or alcoholic beverage to contaminate

the rug gripper

3. Do not place the rug gripper on carpeng which has just been treated for

cleaning.

MATERIAL CONTENT:

• 30% Diisononyl Phthalate, 28% PVC,

25% Calcium Carbonate, 17% Polyester

Home Legend, LLC

PO Box 887, Adairsville, Ga 30103

www.homelegend.com

REV:42017

This manual is also suitable for

Download PDF