Haier LE32K6000D Owner's manual

Brand: Haier

Model: LE32K6000D

Category: LCD TVs

Type: Owner's manual

This manual is also suitable for

LED LCD TV

OWNER' S MANUAL

MODEL: L E 3 2 K 6 0 0 0 D

L E 4 0 K 6 0 5 0 D P

L E 4 0 K 6 0 0 0 D

L E 4 3 K 6 0 0 0 D

L E 5 0 K 6 0 0 0 D

Please READ this manual carefully

before operating your TV, and retain

it for future reference

-1-

Contents

Safety and warnings.................................................................2-3

Introduction............................................................................4

Installation.......................................................................... ...10-17

Remote Control...................................................................... 18

Operation...............................................................................19-25

Trouble Shooting.....................................................................26

Base stand assembly................................................................. 5-8

Wall Mount Installation............................................................ 9

-2-

SAFETY AND WARNINGS

IMPORTANT SAFETY INSTRUCTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK).NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

CAUTION

The symbol indicates that dangerous

voltages constituting a risk of electric shock

are present within this unit.

The symbol indicates that there are

important operating and maintenance

instructions in the literaturaccompanying this

unit.

To reduce the risk of fire or electric shock, do

not expose this apparatus to rain or moisture.

WARNING:

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings, install

in accordance with the instructions.

8) Do not install near any heat sources such as

radiations, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

9) Do not defeat the safety purpose of the

polarized plug. If the provided plug does not fit

into your outlet, consult an electrician for

replacement of the obsolete outlet.

10) Protected the power cord from being walked

on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

11) Only use attachments/accessories specified

by the manufacturer.

12) Unplug this apparatus during lighting

storms or when unused for long periods of time.

13) Refer all servicing to qualified service

personnel. Servicing is required when the

apparatus has been damaged in any way, such as

power-supply cord or plug is damaged, liquid

has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or

has been dropped.

14) Mains plug is used as the disconnect device,

the disconnect device shall remain readily

operable.

15) The ventilation should not be impeded by

covering the ventilation openings with items,

such as newspapers, table-cloth, curtains, etc.

16) No naked flame sources, such as lighted

candles, should be placed on the apparatus.

17) Attention should be drawn to the

environmental aspects of battery disposal.

18) The use of apparatus in moderate climate.

19) The apparatus shall not be exposed to

dripping or splashing and that no objects filled

with liquids, such as vases, shall be placed on

the apparatus.

This symbol indicates that this product

incorporates double insulation between

hazardous mains voltage and user accessible

parts. When servicing use only

identical replacement parts.

This marking indicates that this product should

not be disposed with other household wastes

throughout the EU. To prevent possible harm to

the environment or human health from

uncontrolled waste disposal, recycle it

responsibly to promote the sustainable reuse of

material resources. To return your used device,

please use the return and collection systems or

contact the retailer where the product was

purchased. They can take this product for

environmental safe recycling.

The batteries shall not be exposed to

excessive heat such as sunshine, fire or the

like.

WARNING:

RISK OF ELECTRIC SHOCK

DO NOT OPEN!

CAUTION

-3-

High voltages are used in the operation of this television

receiver. Do not remove the cabinet back from your set.

Refer servicing to qualified service personnel.

SAFETY AND WARNINGS

To prevent fire or electrical shock hazard, do not expose

the television receiver to rain or moisture.

Do not drop or push objects into the television cabinet

slots or openings. Never spill any kind of liquid on the

television receiver.

Do not block the ventilation holes in the back cover.

Adequate ventilation is essential to prevent failure of

electrical components.

Do not trap the power supply cord under the television

receiver.

Never stand on, lean on, or suddenly push the television or

its stand. You should pay special attention to children.

Serious injury may result if it falls.

Do not place your television on an unstable cart, stand,

shelf or table. Serious injury to an individual , and damage

to the television, may result if it falls.

When the television receiver is not used for an

extended period of time, it is advisable to disconnect

the AC power cord from the AC outlet.

Avoid exposing the television receiver to direct sunlight

and other sources of heat. Do not stand the television

receiver directly on other products which give off heat,

e.g. video cassette players and audio amplifiers. Do not

place naked flame sources, such as lighted candles on

the television.

Dim:51 5*320 mm(不包括底座）

If the television is to be built into a compartment or similar

enclosure, the minimum distances must be maintained. Heat

build-up can reduce the service life of your television, and

can also be dangerous.

INTRODUCTION

-4-

Main features

① Used as Television, display terminal, PC display；

② High luminance, wide viewing angle；

③ Can store TV programs；Air and Cable

④ HDMI interface；

⑤ Multi-Media player (USB);

Infrared Remote Controller............

User’

s M anual...............................1

Battery(AAA)................................2

Accessories

Main parameter

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or

registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Viewing Picture Size (Diagonal)

Resolution

Aspect Ratio

TV System

Receiving Channel

Power consumption

Signal input/output

Horizon

Video Signal System

Input Power Voltage

Audio Output Power

（THD 7%）

tal definitio n（TV line ）

Composite Video input >=350

Y Cb(Pb ) Cr(Pr ) >=400

1366x768

16 : 9

NTSC/M,PAL/M, PAL/N,ISDB-T

PAL/NTSC/SECAM

Air: 2-69

Cable: 1-125

AC 100-240V 50/60Hz

High-Definition Multimedia Interface(HDMI) x 3

Composite Video Input x 1

Audio Input x 1

YCb (Pb )Cr (P r) x 1

USB x 1

COAXIAL OUTPUT x 1

RFx 1

32 inch

2x8W

40W

Analog RGB(VGA) x 1

1366x768

39 inch

1920x1080

40 inch

1920x1080

43 inch

Model

LE32K6000D LE40K6050DP LE40K6000D LE43K6000D

1920x1080

50 inch

LE50K6000D

2x8W

60W

2x8W

70W

2x8W

75W

2x8W

110W

32"BASE STAND ASSEMBLY

-5-

M4X12MM

Note: This stand is not a swivel stand. Do not attempt to rotate the TV.

2. Lock 4PCS screws below and check each screw is firmly tightened.

1. Place the TV with the display side down on a flat surface. Use a cloth to protect the

display.

Locate the 2PCS of bottom bracket into the gap in the bottom of the TV.

Note: This stand is not a swivel stand. Do not attempt to rotate the TV.

2. Lock 4PCS screws below and check each screw is firmly tightened.

M4X14MM M4X14MM

1. Place the TV with the display side down on a flat surface. Use a cloth to protect the

display.

Locate the 2PCS of bottom bracket into the gap in the bottom of the TV.

39"BASE STAND ASSEMBLY

-6-

40"BASE STAND ASSEMBLY

-7-

M4X20MM

Note: This stand is not a swivel stand. Do not attempt to rotate the TV.

2. Fix screws on the back cover, two for each side, assembly finished.

1. Place the Panel side of TV on the platfrom and insert the two stands into TV, making

the screws holes stands correspond to the holes of TV.

-8-

Note: This stand is not a swivel stand. Do not attempt to rotate the TV.

M4X14MM

2. Lock 4PCS screws below and check each screw is firmly tightened.

1. Place the TV with the display side down on a flat surface. Use a cloth to protect the

display.

Locate the 2PCS of bottom bracket into the gap in the bottom of the TV.

43"/50"BASE STAND ASSEMBLY

WALL MOUNT INSTALLATION

-9-

wall

Step One: Use the expansion bolts( ) to fix the wall mount brackets into the wall.4*36PWA

Step Three: Put the LCD TV with wall mount screws onto the wall mount brackets.

Warning: the angle between the TV and wall must not be bigger than 3º.

Step Two: Fix the wall mount screws

into the rear side of the LCD TV,using the tongue of

(32"/39"M4x5/4pcs, 40"M6x8 M6x12mm/4pcs)

8kgf.cm.

* The TV appearance subject to material object.

/4pcs, 43"/50"

-10-

INSTALLATION

Front panel

1: Remote control sensor.

2: Indicator LED: RED STANDBY.

3: Key board

KEYBOARD

REAR AV Connections (32"/40"/43")

All the terminals are(from left to right):

VIDEO, AUDIO INPUT, COMPONENT INPUT, HDMI3, HDMI2, HDMI1.

Note: VIDEO and YPbPr share one audio channel.

REAR AV Connections(SIDE) (32"/40"/43")

All the terminals are (from left to right):

VGA, RF INPUT, USB, Coaxial.

Note: When HDMI port get DVI signal, the audio signal receives from the AV Audio channel.

VIDEO

L R Pr

HDMI3

HDMI2 HDMI1

≤8m

Bottom

USB COAXIALVGA

1. Middle Button: press longtime for “power” function;

2. Up/Down: CH+/-

3. Left/Righ: VOL-/+

press once for “source” and “menu” function

10LA

≤8m

Bottom

Rocker

10LA

Rocker

32"

40"/43"

Front panel (39")

KEYBOARD (39")

1: Remote control sensor.

2: Indicator LED: RED STANDBY.

3: Key board

1．SOURCE：

Display the input source menu.

2．MENU：

Display main MENU.

3．V-/V+

Adjust sound level.

In MENU mode, press“V+”or“V-”to

adjust the item that you selected.

4．CH-/CH+

In TV mode，press“CH+”or“CH-”to change

the channel up and down.

In MENU mode, press “CH+”or“CH-”to select

items.

5. STANDBY

Press this button to turn the unit ON from

STANDBY mode.

Press it again to turn the set back to STANDBY.

30 30

-11-

INSTALLATION

REAR AV Connections (39")

All the terminals are(from left to right):

VIDEO, AUDIO INPUT, COMPONENT INPUT, HDMI3, HDMI2, HDMI1.

Note: VIDEO and YPbPr share one audio channel.

REAR AV Connections(SIDE) (39")

All the terminals are (from left to right):

VGA, RF INPUT, USB, Coaxial.

Note: When HDMI port get DVI signal, the audio signal receives from the AV Audio channel.

VIDEO

L R Pr

HDMI3

HDMI2 HDMI1

USB COAXIALVGA

10LA

INSTALLATION

Front panel (50")

1: Remote control sensor.

2: Indicator LED: RED STANDBY.

3: Key board

KEYBOARD (50")

REAR AV Connections (50")

All the terminals are(from left to right):

AUDIO INPUT, VIDEO,

Note: VIDEO and YPbPr share one audio channel.

Coaxial, COMPONENT INPUT.

REAR AV Connections(SIDE) (50")

All the terminals are (from left to right):

Note: When HDMI port get DVI signal, the audio signal receives from the Audio channel.

HDMI3, HDMI2, HDMI1, VGA, USB, RF INPUT.

≤8m

Bottom

USBVGA

HDMI3 HDMI2 HDMI1

VIDEO/Y

L R Pr

COAXIAL

1. Middle Button: press longtime for “power” function;

2. Up/Down: CH+/-

3. Left/Righ: VOL-/+

press once for “source” and “menu” function

-12-

10LA

INSTALLATION

Note:

Aerial connections: F(male).

Input impendance: 75 unbalanced.

ANTENNA

STEPS:

Be sure both the TV and computer are

set to Power off.

1.Connect VGA and audio cable.

2.Connect the power cord.

3.Power on the TV, switch to PC mode.

4.Power on the PC.

This sequence is very important.

VIDEO

L R Pr

HDMI3

HDMI2 HDMI1

USB COAXI ALVGA

32"/39"/40"/43"

-13-

INSTALLATION

USBVGA

HDMI3 HDMI2 HDMI1

VIDEO /Y

L R Pr

COAXI AL

50"

32"/40"/43"/50" 39"

-14-

INSTALLATION

PRESET MODE (PC)

NOTE: PC V.Freq.(Hz) not more than 60Hz.

800*600

1024*768

37.88

48.36

RESOLUTION

V.Freq.(Hz) H.Freq.(KHz)

1280*768

60 47.3

PRESET MODE (HDMI)

800*600

1024*768

37.88

48.36

RESOLUTION

V.Freq.(Hz) H.Freq.(KHz)

1360*768

47.7

1280*768

47.3

1920*1080(only for 40"/43"/50")

60 67.5

1920*1080

67.5

-15-

INSTALLATION

-16-

It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder,

video game or stereo system, etc.....

YPbPr can support these video formats:480i,576i,480p,576p,720p,1080i,1080P.

This TV provides one group of AV ,one group of YPbPr for convenient connection to VCR, DVD

or other video equipment. Please refer to the owner's manual of the equipment to be connected

as well.

You can use the input terminals on TV set rear as follows.

AV EQUIPMENT (32"/39"/40"/43")

1.VIDEO and YPbPr share one audio channel.

2.When HDMI port get DVI signal, the " " channel is changed to receive the

audio for HDMI port.

3.Sometimes it will not support in different device because the device supplys

nonstandard signal.

AV Audio

Note:

Red (audio R)

White(audio L)

Red(Pr or Cr)

Blue(Pb or Cb)

Green(Y)

Yellow (video)

W R

HDMI

TO AUDIO OUTPUT

VI DE O EQ UI PMENT

TO VIDEO OUTPUTS

VIDEO EQUIPMENT with YPbPr

VIDEO

L R Pr

HDMI3

HDMI2 HDMI1

INSTALLATION

-17-

It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder,

video game or stereo system, etc.....

YPbPr can support these video formats:480i,576i,480p,576p,720p,1080i,1080P.

This TV provides one group of AV ,one group of YPbPr for convenient connection to VCR, DVD

or other video equipment. Please refer to the owner's manual of the equipment to be connected

as well.

You can use the input terminals on TV set rear as follows.

AV EQUIPMENT (50")

1.VIDEO and YPbPr share one audio channel.

2.When HDMI port get DVI signal, the " " channel is changed to receive the

audio for HDMI port.

3.Sometimes it will not support in different device because the device supplys

nonstandard signal.

AV Audio

Note:

Red (audio R)

White(audio L)

Red(Pr or Cr)

Blue(Pb or Cb)

Green(Y)

Yellow (video)

W R

HDMI

TO AUDIO OUTPUT

VI DE O EQ UI PMENT

TO VIDEO OUTPUTS

VIDEO EQUIPMENT with YPbPr

VIDEO/Y

L R Pr

COAXIAL

USBVGA

HDMI3 HDMI2 HDMI1

-18-

REMOTE CONTROLLER

No function

Press to turn the TV on or off.

(Power)

S.MODE

Press to select the sound mode.

P.MODE

Press to select the picture mode.

Press to enter a channel number

or password.

Q.VIEW

Press to switch to the last viewed

channel.

Press to open the on-screen menu.

Press to navigate the on-screen menu.

Press to confirm a selection.

Press to return to the previous screen.

INPUT

Press to open the input source list.

Press to change the channel.

Press to open the channel list.

Press to close the on-screen menu.

GUIDE

Press to display electronic programme guide

in TV mode.

(REC)

Insert Batteries into the Remote Control

1. Remove the battery cover.

2. Inserting the 2 AAA 1.5V batteries making sure the polarity

(+ or -) of the batteries matches the polarity marks inside the unit.

3. Mount the battery cover. Replace with new batteries when the

TV set begins to show the following symptoms:Operation is

unsteady or erratic. Sometimes the TV set does not function

with Remote Control Unit.

Remark:

1) Alkaline Battery Recommeded.

2) Remove batteries when they are exhausted or if the remote

control is not to be used for long time.

(Mute)

Press to turn the sound on or off.

TOOL

Press to open the shortcut menu of tool.

VOL +/-

Press to adjust the volume level.

Fav.APP

Press to display the channel information.

Press to open a favorite channel list.

(reverse)

Press to reverse playback in multimedia.

(Play)

(forward)

Press to fast forward in multimedia.

Press to pause in multimedia.

(Pause)

Coloured

buttons

Programme Edit: Delete, Skip.

EPG: Info, Schedule, Reminder.

Press to play in multimedia .

Press to stop in multimedia.

0~9/

number

Press to record the TV program you are watching

in DTV mode.

10LA

No function

-19-

When you first power up your TV, (or you reset the TV

to its factory settings), it will automatically enter the

language selection (pre-set to Spanish), so just press

the OK button on the Remote Control to confirm this

option.

TV OPERATION

The TV will then offer a Password setting.You can

set new Password for TV.

1.CHANNEL MENU

1).Auto Tuning:

When manually selected Auto Tuning.TV will auto search

DTV,ATV,Radio and CATV.

2). DTV Manual tuning:

You can select a DTV channel and find out how many

programs are being transmitted on this channel.

Press◀▶ to select the channel, then press OK to search

the programs .

NOTE:

The Bad Normal Good bar graph on this screen shows the

relative signal intensity during DTV reception only.

To obtain more detail regarding the signal quality and

strength of a received DTV station, refer to the Signal

Information option in this Menu.

3). ATV Manual tuning:

You can search the analog TV channels and fine tune

them,then store the channels you selected. Also can

select TV system:NTSC,PAL/M,PAL/N.etc

NOTE:

Press the red button on the remote control to store the

channels after manual tuning.

4). Program Edit:

You can Delete, Skip, or FAV most TV programs

from the list of TV stations previously located during

the initial Auto Tuning process.

First Powering on the TV:

Password

Please enter new password

Confirm new password

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

Auto tuning

Signal Information

Software Update(USB)

DTV Manual Tuning

ATV Manual Tuning

Programme Edit

Back Move OK

DTV Manual Tuning

UHF CH 31

Press OK to search

Bad Normal Good

ATV Manual Tuning

Storage To 3

Frequency 61.25 MHz

SAVE

NTSC

Current CH 3

Fine-Tune

Programme Edit

5.1 TV GlobHD

ATV

DTV

Delete SKIP

OK FAV:FAV

Press▼▲to choose the program, press the blue button

on the Remote Control to skip this program, the

symbol will show on the right side of the program name.

Choose the skipped program, press the blue button again,

you can cancel the skip and the symbol will disappear.

Delete

Press t he red button on the Remote Control and

the program in the cursor will be deleted from the list of

stations.To restore a deleted channel, perform a

complete Auto Tune.

Skip

Page is loading ...

Haier LE32K6000D Owner's manual

Brand: Haier

Model: LE32K6000D

Category: LCD TVs

Type: Owner's manual

This manual is also suitable for

Download PDF

report

Haier LE32K6000D Owner's manual

This manual is also suitable for

Haier LE32K6000D Owner's manual

Related papers

Other documents