Janam GT2 User guide

Janam
Brand
Janam
Model
GT2
Type
User guide

This manual is also suitable for

Janam GT2 Series Temperature Sensing Kiosk is an innovative device designed to provide accurate and reliable temperature readings in various indoor settings. With its advanced infrared technology, the GT2 can quickly and easily measure the temperature of individuals, helping businesses and organizations enhance health and safety measures. The kiosk's user-friendly interface and various mounting options make it suitable for a range of use cases, including access control, visitor screening, and employee temperature monitoring.

Janam GT2 Series Temperature Sensing Kiosk is an innovative device designed to provide accurate and reliable temperature readings in various indoor settings. With its advanced infrared technology, the GT2 can quickly and easily measure the temperature of individuals, helping businesses and organizations enhance health and safety measures. The kiosk's user-friendly interface and various mounting options make it suitable for a range of use cases, including access control, visitor screening, and employee temperature monitoring.

GT2 Series™
Quick Start Guide
Technology at Work.
®
090920GT2 www.janam.com
GT2 Series Quick Start Guide
Janam Technologies LLC
Copyright 2020 Janam Technologies LLC. All rights reserved.
GT2 Series, Janam and the Janam logo are trademarks of Janam Technologies LLC. Other product and brand
names may be trademarks or registered trademarks of their respective owners.
Janam Technologies LLC assumes no responsibility for any damage or loss resulting from the use of this guide.
Janam Technologies LLC assumes no responsibility for any loss or claims by third parties which may arise through
the use of this product. Janam Technologies LLC assumes no responsibility for any damage or loss caused by deletion
of data as a result of malfunction, dead battery or repairs. To protect against data loss, be sure to make backup
copies (on other media) of all important data.
Follow all usage, charging and maintenance guidelines in the Product User Guide. If you have questions, contact
Janam. For a copy of the Product User Guide, visit www.janam.com.
Legal Disclaimer: This is not a medical device. The FDA has not evaluated any statements regarding this
temperature device. This temperature device should not be primarily or solely relied upon to diagnose (or rule out a
diagnosis of) COVID-19 or any other disease or health condition. Like any diagnostic measurement, elevated body
temperature should be independently conrmed with alternate evaluation methods.
Page 1 GT2 Series Quick Start Guide
Content and Additional Resources
Janam Technologies LLC
To help you get started with your GT2 Series mobile computer, this guide features:
- Hardware Overview
- Getting Started
A. Wall-Mounted Installation
B. Gate-Mount Installation
C. Software Features
Contents of this guide are subject to change.
For software updates and information, visit www.janam.com/support.
Page 2 GT2 Series Quick Start Guide
Hardware Overview
Janam Technologies LLC
1. Photo light
2. Display
3. Infrared Light
4. Camera
5. Camera
1
4
2
5
3
Page 3 GT2 Series Quick Start Guide
Wall-Mounted Installation
Janam Technologies LLC
Important Note: GT2 is designed for indoor use. Avoid direct sunlight on the camera lens or display.
WALL-MOUNTED INSTALLATION
Installation Procedure:
Note: Drill holes into the wall
Insert expansion screw
Install hanging plate
Place GT2 kiosk up against hanging plate
Secure GT2 in place with anti-theft screw
Page 4 GT2 Series Quick Start Guide
1 2 3 4 5
1
2
3
4
5
Main
Machine
Hanging
plate
Anti-theft screw
Self-tapping
screws x 4
Wall hole x 4
Expansion screw
plug x 4
4 1
2
5
3
Wall-Mounted Installation
Janam Technologies LLC
Step 1:
Drill four holes in the wall according to the following
schematic size. Then insert screws into the dowel in
the hole.
Note: Reserve space on the wall for wire connection.
Step 2:
Fix the hanging plate on the wall.
Page 5 GT2 Series Quick Start Guide
11cm
8cm
12.54cm
14.14cm
Wall-Mounted Installation (continued)
Janam Technologies LLC
Step 3:
Attach GT2 to the plate.
Step 4:
Install anti-theft screws.
Page 6 GT2 Series Quick Start Guide
Host device
snapped into the
hanging board
Lock the anti-theft screw
Gate-Mount Installation
Janam Technologies LLC
Drill hole in the surface to which GT2 will be installed.
Diameter of the hole should be between 1.33~1.37 inches.
Insert the vertical handle into GT2 and then insert into the
drilled hole. Tighten the screws to secure GT2 in place.
Page 7 GT2 Series Quick Start Guide
Software Features
Janam Technologies LLC
Notes:
• Connect a mouse to the USB port. Left click of a mouse
is for conrmation and right click is for return.
• After connecting to network, the IP address will appear
in the upper left corner of the main screen.
• The computer or mobile phone used to support GT2 will
need to connect to the same IP.
4.1 Network Connection Settings
4.11 Using Wi-Fi network connection
1. Power on GT2 and plug in mouse.
2. Drag down top bar (move cursor to top bar, left click and
drag down).
3. Click the Wi-Fi icon to enter the Wi-Fi settings interface.
(shown in FIG. 1)
4. Or click the Gear icon and enter the system interface as
(shown in FIG. 2).
5. Click to select WLAN (Wi-Fi network).
FIG. 1 FIG. 2
Page 8 GT2 Series Quick Start Guide
Software Features
Janam Technologies LLC
4.12 Using Wi-Fi network Connection
1. Non-fixed IP address: After you are connected to
the Internet, wait 2 minutes and the top left corner
of the main screen will show the IP address of the
device.
2. Fixed IP address: Enter the Ethernet interface (as
shown in FIG. 2). Click the Ethernet icon, then
Ethernet conguration (FIG. 3) and select a static IP.
Enter the correct IP address, subnet mask,
DNS server and other information and then click to
save.
After successfully connected, the top left corner of the
main interface devices will show IP address of the device
(consistent with the IP address input setting).
Page 9 GT2 Series Quick Start Guide
FIG. 3
Software Features
Janam Technologies LLC
4.2 Web Management Interface Operation
Use PC or smartphone to open a Chrome web browser.
5.2.1 Web Interface Log
1. Enter GT2’s IP address in the browser address bar and
add post 8090. For example: 192.168.3.243: 8090.
2. Default Password is 123456.
Page 10 GT2 Series Quick Start Guide
5.2.2 Web Management Interface Operation
For security purposes, it is recommended that you change
the password. Password length cannot exceed 12 digits
and cannot include special characters such as “@ # $ “
Appendix: Installation Environmental Reminders
Janam Technologies LLC
1. Installation ambient light value
Candle: 10 Lux
Lamp: 100~850 Lux
Lamp: 100~850 Lux
Note: Minimum illumination device support for 100 Lux.
2. Mount GT2 at least 6 feet from the light source and at least 9 feet from windows and doors.
Page 11 GT2 Series Quick Start Guide
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Janam GT2 User guide

Janam
Brand
Janam
Model
GT2
Type
User guide
This manual is also suitable for

Janam GT2 Series Temperature Sensing Kiosk is an innovative device designed to provide accurate and reliable temperature readings in various indoor settings. With its advanced infrared technology, the GT2 can quickly and easily measure the temperature of individuals, helping businesses and organizations enhance health and safety measures. The kiosk's user-friendly interface and various mounting options make it suitable for a range of use cases, including access control, visitor screening, and employee temperature monitoring.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents