OUKANING HG-HCXLST-2808 Operating instructions

OUKANING
Brand
OUKANING
Model
HG-HCXLST-2808
Type
Operating instructions
8090安装说明书
8090 instruction for installation
一、配件展示，检查配件是否缺
少 1、
First, the accessories are
displayed, and check whether
the accessories are missing
二、灯体展示
2、Lamp body display
三、两个侧框对应好底盘两面的
侧孔锁紧螺丝。 3
、The two side frames
correspond to the side hole
locking screws on both sides
of the chassis.
四、组装好成错开状态
4、Assembled in a staggered
state
五、中框对应好底盘面部螺丝孔位置
5、The middle frame corresponds
to the screw hole position of
the chassis face
六、地线任意套在一个螺丝上 ，
锁紧全部螺丝。 6
、Set the ground wire on one
screw at will, and lock all
screws.
七、驱动器电源线和灯体电源线
对插好端子。正确的对应好颜色
线。 7、Plug the driver
power cord and the lamp body
power cord into the terminals.
Match the color lines
correctly.
八、挂板用螺丝固定在天花板上
8、The hanging board is fixed
on the ceiling with screws
九、驱动电源线和地线与家用电
源线用接线端子对应接好 ，锁螺
丝即可。9、 The driving power
cord and ground wire are
connected with the household
power cord correspondingly by
connecting terminals, and the
screws can be locked.
十、灯体和挂板在地盘两侧锁紧
螺丝。 10
、Lock screws on both sides
of the site for the lamp body
and hanging plate.
十一、安装完成效果图
11、Installation completion
renderings
温馨提示：组装好灯体试电后再安装 ！
Warm tip:After the lamp body is assembled,
please test the electricity before
installing it
  • Page 1 1

OUKANING HG-HCXLST-2808 Operating instructions

OUKANING
Brand
OUKANING
Model
HG-HCXLST-2808
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Other documents