Page is loading ...
Instructions SV-26DF
Please make sure the battery is enough for the rst time use, if the battery is low, you will not be
able to start the Dat App properly.
1. Download and pairing version with call
1.1. Long press the home button to power on.
1.2. Please use your mobile phone to scan the QR code below to download and install the app, or
search for “Da Fit” in the Apple Store or Android App Market to download and install.
Compatible system: Android 4.4 and above, Bluetooth 4.0 mobile phones; iPhone IOS 8.0 and
above
1.3. Open the mobile app and select the device to be paired from the list of devices in the app.
Step 1: Turn on the phone’s Bluetooth.
Step 2: Open the “Da Fit” app on your phone and click the “Go to Add” bracelet.
Step 3: Click “Enable” on the clock end phone interface.
Step 4: Check “About” on the watch side, which is the last four digits of the MA address, and
match the corresponding Bluetooth model and the last four digits of the MAC in the mobile phone
Bluetooth settings to complete pairing.
2. Function Description
2.1 Main Interface
2.1.1 Power on: Long press “Home” button for 3 seconds to power on, and then enter the dial
interface.
2.2.2 Shutdown: In dial interface status, press and hold “Home” button for 3 seconds and select
“√” to shutdown.
2.3.3 Change watch face: Long press the watch face interface to change at will. You can customi-
ze the watch face in the app and upload the image you want to make the face.
2.2 Menu
2.2.1 Exercise information (displays the number of exercise steps that day)
2 2.2 Sleep information (from 8 o’clock in the evening to 10 o’clock in the morning to automatically
detect the time and sleep status, that is, the app synchronizes the data, and you need to wear a
sleep bracelet to detect the data).
2.2.3 Exercise.
2.2.4 Heart rate detection.
2.2.5 Blood pressure detection.
2.2.6 Blood pressure measurement.
2.2.7 Weather forecast (swipe up on the screen to display the weather of the
next week).
2 2.8 Camera control (Android: open the app on the mobile phone, enter the remote camera
function at the end of the bracelet, click the icon or shake the bracelet to complete the photo / IOS:
enter “Camera Control” at the end of the bracelet, turn on the camera at the end of the mobile,
shake the bracelet or Click the icon of the bracelet to complete the photo).
2.2.9 Music control
2.2.10 Push notication (slide the screen from the main interface to see the message notication)
Enable “Push Notication” in the app (open “notication access” in Android version) to sync We-
Chat, phone, QQ, SMS and other messages in the app; Please enable QQ message reminder,
WeChat reminder, SMS reminder, third-party software such as Sina Weibo, skype and other noti-
cations in the mobile phone “Settings”. When the mobile terminal receives a message, it will be
immediately synchronized with the wrist terminal, and the content of the message can be viewed
in the notication menu of the watch terminal.
2.2.11 Breathe
3. Shortcut menu (slide down the screen from the interface
principal)
3.1 Telephone
3.2 About
3 3 Menu view
3.4 Vibration or silent mode
3.5 Brightness adjustment
3.6 Settings
4. Mobile App Feature
4.1 Display the functional test data of the watch, such as the number of steps, sleep data, heart
rate, all-day heart rate detection, blood pressure, blood oxygen, etc. multiple exercise
4.2 Clock connection interface
4.2.1 Dial selection (4 dial interfaces can be selected, and the dial can be customized on the
application side)
4 2.2 Push notication (Please enable the use of notications correctly; enable the sending of
messages from social applications, QQ, WeChat, Facebook, Whatsapp)
4.2.3 Daily alarm clock (three can be set)
4.2.4 Remote camera
4.2.5 Other settings (can be done to nd the bracelet, set the time format, set the do not disturb
time, sedentary reminder, all-day heart rate measurement, palms bright screen function, drink re-
minder water, weather information, menstrual cycle function)
- Activate the bracelet search mode, the bracelet vibrates when the mobile phone and the bracelet
are connected in Bluetooth.
- Time format setting (12 and 24 hour system can be selected)
- Time period setting of Do Not Disturb mode.
-Sedentary reminder (valid time period from 10:00 to 22:00)
- All-day heart rate measurement (turn on the switch to achieve all-day heart rate measurement)
- Bright screen with palms (open the switch to select the effective period)
- Reminder to drink water.
- Weather information (turn on the switch, the phone can automatically locate your city or select
another city, the watch will display the weather in the corresponding city)
- Menstrual cycle reminder
(Note: The above features need to be activated and saved in the app to work properly)
Warranty:
We do not advise immersion of watches and we do not accept their return as a guarantee, since
we consider them only IMPERMEABLE.
We also do not recommend having a shower with it, as the hot water vapor can affect both the
battery and the clock module. Also avoid sudden changes in temperature.
/
