2. Gianni Industries
  3. MOD-AD500DB
MOD-AD500DB

Gianni Industries MOD-AD500DB User manual

  • Hello! I've reviewed the Installation Instructions for the AD500DB Interlock Module. This document explains how to set up the module on the AD500 Control Unit and configure the sequence of door operation, using master and slave configurations. I'm ready to answer your questions.
  • How do I install the AD500DB Interlock Module?
    How do I configure the door opening sequence?
    What is the correct opening sequence?
    What is the correct closing sequence?
AD500DB
Module
AD500DB
Module
Jumper Setting
Instructions:
Install the AD500DB Interlock Module on the AD500 Control Unit per shown in the diagram.
Configure 'Master' and 'Slave' through jumper setting for the system to reconise the order
in which the doors will open.
(Cable length: 2.5 meters)
Master
22AWGx4C
22AWGx4C
AD500DB
Module
AD500DB
Module
Jumper Setting
Slave
MOD-AD500DB Interlock Module Installation Instructions
1. Master door opens first
2. Once master door opens, slave door
follows.
3. Slave door closes first
4. slave door is closed, master door
will start to close.
Copyright © All Rights Reserved. P-MU-MOD-AD500DB Published: 2021.12.09
/