Jabra Evolve 65e UC Operating instructions

Jabra Evolve 65e UC

How do I pair my Jabra Evolve 65e with my mobile device?

To pair your Jabra Evolve 65e with your smartphone, tablet, or other

mobile device, follow these steps.

1. Turn on the Bluetooth setting on your mobile device.

2. Turn off your Jabra Evolve 65e by pressing and holding (3 seconds) the

Multi-function button until the LED flashes red and the neckband

vibrates.

3. To enter pairing mode, press and hold (3 seconds) the Multi-function

button until the LED flashes blue. If you are wearing the earbuds, you

will hear the pairing instructions.

Your earbuds are now ready to pair with your mobile device.

4. To pair, go to the Bluetooth menu on your mobile device and select the

Jabra Evolve 65e from the list of available devices.

Enter “0000” (four zeros) if you are asked for a PIN.

Note

If pairing is not successful, try the pairing steps again, or try pairing with a

different Bluetooth device. For troubleshooting tips, see here.

Optionally, try using the Bluetooth Pairing Guide which provides detailed

30/04/2022 23:14

https://www.jabra.in/supportpages/jabra-evolve-65e/6599-629-109/faq/1020b03f-121a-

431b-b00b-9b0240224fd0

Page 1 of 2

steps for pairing with a mobile device.

30/04/2022 23:14

https://www.jabra.in/supportpages/jabra-evolve-65e/6599-629-109/faq/1020b03f-121a-

431b-b00b-9b0240224fd0

Page 2 of 2