Jabra Evolve 65e UC Operating instructions

Type
Operating instructions

Below you will find brief information for Evolve 65e UC. This document provides instructions on how to manually reset your Jabra Evolve 65e earbuds to the default settings. Resetting the earbuds will clear previously paired devices and settings. The process involves ensuring the earbuds are turned on and not in a call, then simultaneously pressing and holding the Volume up and Multi-function buttons for 5 seconds. After resetting, you'll need to re-pair the earbuds with the Jabra Link Bluetooth adapter using Jabra Direct.

Below you will find brief information for Evolve 65e UC. This document provides instructions on how to manually reset your Jabra Evolve 65e earbuds to the default settings. Resetting the earbuds will clear previously paired devices and settings. The process involves ensuring the earbuds are turned on and not in a call, then simultaneously pressing and holding the Volume up and Multi-function buttons for 5 seconds. After resetting, you'll need to re-pair the earbuds with the Jabra Link Bluetooth adapter using Jabra Direct.

Jabra Evolve 65e UC
How do I manually reset my Jabra Evolve 65e earbuds to the
default settings?
When you reset your Jabra Evolve 65e earbuds, previously paired devices
and settings will be cleared.
To reset, follow these steps:
1. Ensure the earbuds are turned on, and that you are not on a call.
2. Simultaneously press and hold (5 seconds) the Volume up button and
the Multi-function button.
Note
After resetting, you will need to re-pair the earbuds with the Jabra Link
Bluetooth adapter using Jabra Direct.
18/06/2022 16:32
https://www.jabra.com.au/supportpages/jabra-evolve-65e/6599-629-109/faq/d26367ca-
250a-4e89-9add-7010c488f12e
Page 1 of 1
  • Page 1 1

Jabra Evolve 65e UC Operating instructions

Type
Operating instructions

Below you will find brief information for Evolve 65e UC. This document provides instructions on how to manually reset your Jabra Evolve 65e earbuds to the default settings. Resetting the earbuds will clear previously paired devices and settings. The process involves ensuring the earbuds are turned on and not in a call, then simultaneously pressing and holding the Volume up and Multi-function buttons for 5 seconds. After resetting, you'll need to re-pair the earbuds with the Jabra Link Bluetooth adapter using Jabra Direct.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI