HOMEDEPOT.com
Please contact 1-877-297-6069 for further assistance.
Installation
Safety Information
Warranty
This product is warranted to the original consumer purchaser to be free from defects in material and workmanship for a period of one year from the date of
purchase. For additional details and questions, please contact Everbilt Customer Service at 1-877-297-6069.
TOOLS REQUIRED
Installation Guide
18 in. x 30 in.
Sewage Pump Basin
Item # 1000027549
Model # SF30BA
WARNING:Failure to install basin cover as shown will create a safety risk. Install cover as shown.
Note: This guide serves only as a general
installation guide. Please refer to your local
state and/or local plumbing regulations for
details pertaining to your systems design,
installation and maintenance requirements.
1. Excavate hole large enough to accommodate
basin, backfill material and inlet piping
2. Add 4 to 6 inches of clean backfill material or
concrete to the bottom of the hole, making
sure that it is level, compacted and smooth
3. Place the basin in the hole and make sure
that it is level
4. Carefully backfill with naturally rounded gravel
or stone (larger than 3/8 in. and smaller than
3/4 in. diameter) around the periphery of the
basin
5. Connect all piping as required
6. Finish floor around the basin as required
Tools Required
This product is warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer
owns their home. For additional details and questions, please contact Everbilt Customer Service at 1-877-297-6069.
This product is warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer
owns their home. For additional details and questions, please contact Everbilt Customer Service at 1-877-297-6069.
