Siemens TIA Portal Module 090-020 User manual

Brand: Siemens

Model: TIA Portal Module 090-020

Type: User manual

Siemens TIA Portal Module 090-020 is a training curriculum for Totally Integrated Automation (TIA) solutions. It provides a comprehensive overview of the TIA Portal, including its hardware and software components, and how to use them to create and manage automation projects.

Industry Sector, IA&DT

SCE Training Curriculum Page 1 of 48 To be used only at Educational and R&D Facilities

SCE_EN_090-020_R1209_ WinCC Advanced Runtime Services

TIA Portal Module 090-020

WinCC Runtime Advanced Services

SCE Training Curriculum

for Integrated Automation Solutions

Totally Integrated Automation (TIA)

Siemens Automation Cooperates with Education

Industry Sector, IA&DT

SCE Training Curriculum Page 2 of 48 To be used only at Educational and R&D Facilities

SCE_EN_090-020_R1209_ WinCC Advanced Runtime Services

Suitable SCE trainer packages for these training curriculums

SIMATIC controllers

 SIMATIC S7-300 with CPU 314C-2PN/DP

Order no.: 6ES7314-6EH04-4AB3

 SIMATIC S7-300 with CPU 314C-2PN/DP (upgrade)

Order no.: 6ES7314-6EH04-4AB4

 SIMATIC S7-300 with CPU 315F-2PN/DP

Order no.: ES7315-2FH14-4AB1

 SIMATIC ET 200S with CPU IM151-8 F PN/DP

Order no.: 6ES7151-8FB00-4AB1

SIMATIC HMI

 SIMATIC TP700 Comfort Panel - Color

Order no.: 6AV2133-4AF00-0AA0

SIMATIC STEP 7 software for training

 SIMATIC STEP 7 Professional V11 - Single license

Order no.: 6ES7822-1CC01-4YA5

 SIMATIC STEP 7 Professional V11 - Classroom license (up to 12 users)

Order no.: 6ES7822-1AA01-4YA5

 SIMATIC STEP 7 Professional V11 - Upgrade license (up to 12 users)

Order no.: 6ES7822-1AA01-4YE5

 SIMATIC STEP 7 Professional V11 - Student license (up to 20 users)

Order no.: 6ES7822-1AC01-4YA5

Please note that these trainer packages may be replaced by successor trainer packages.

An overview of the currently available SCE packages is provided under: HUsiemens.com/sce/tpUH

Advanced training

Please get in touch with your regional SCE contact for information on regional Siemens SCE advanced training

siemens.com/sce/contact

Additional information regarding SCE

siemens.com/sce

Information regarding usage

This SCE training curriculum for the end-to-end automation solution Totally Integrated Automation (TIA) was

prepared for the program "Siemens Automation Cooperates with Education (SCE)" specifically for educational

purposes for public educational institutions and R&D facilities. Siemens AG does not make any guarantee

regarding its contents.

This document may only be used for initial training on Siemens products/systems. That is, it may be copied in

whole or in part and handed out to participants for use within the context of their education. Distribution and

reproduction of this training curriculums and disclosure of its contents are permitted within public education and

further education institutions for educational purposes.

Any exceptions require written consent from the Siemens AG contact person: Mr. Roland Scheuerer

[email protected].

those rights created as a result of a patent being granted or utility model being registered.

Use for industry customers is expressly prohibited. We do not consent to any commercial use of the training

curriculum.

We would like to thank Michael Dziallas Engineering and all those involved for their support in creating this

training curriculum.

Industry Sector, IA&DT

SCE Training Curriculum Page 3 of 48 To be used only at Educational and R&D Facilities

SCE_EN_090-020_R1209_ WinCC Advanced Runtime Services

PAGE:

1. Preface.......................................................................................................................................................... 4

2. Notes on programming the SIMATIC S7-300 ............................................................................................... 6

2.1 SIMATIC S7-300 automation system ......................................................................................................... 6

2.2 STEP 7 Professional V11 (TIA Portal V11) programming software ........................................................... 6

2.3 Operator control and monitoring with WinCC ............................................................................................. 7

3. Project description ........................................................................................................................................ 8

3.1 Hardware configuration ............................................................................................................................... 8

3.2 Station description ...................................................................................................................................... 9

3.3 Previous configuration .............................................................................................................................. 10

3.4 Expanded configuration and task ............................................................................................................. 10

4. Inserting an Operator PC in the Ink Mixing Station project ......................................................................... 11

4.1 Loading and re-saving a project template ................................................................................................ 12

5. Configuring on the operator PC .................................................................................................................. 21

5.1 SIMATIC HMI HTTP connection ................................................................................................................ 22

5.2 Tags on the PC-System_Advanced.......................................................................................................... 24

5.3 Configuring the overview screen .............................................................................................................. 25

5.4 Starting the PC-System_Advanced in Runtime ........................................................................................ 29

5.5 Trend view of the ink mixing station ......................................................................................................... 30

5.6 Trend view in runtime ............................................................................................................................... 35

6. Remote Control of the TP700 Comfort with Sm@rtOptions ....................................................................... 36

6.1 "Sm@rtServer" Runtime Service .............................................................................................................. 37

6.2 Sm@rtClient application on the PC .......................................................................................................... 38

6.3 Sm@rtClient via Web browser ................................................................................................................. 40

7. Sm@art Options on the Operator_PC-System ........................................................................................... 43

7.1 Configuring the Sm@rtClient view ............................................................................................................ 43

7.2 Sm@artClient view in Runtime ................................................................................................................. 45

7.3 Configuring the HTML browser ................................................................................................................. 46

7.4 HTML browser in Runtime ........................................................................................................................ 48

Industry Sector, IA&DT

SCE Training Curriculum Page 4 of 48 To be used only at Educational and R&D Facilities

SCE_EN_090-020_R1209_ WinCC Advanced Runtime Services

1. Preface

Regarding its content, module 090-020 is part of the 'Process visualization' training unit and

demonstrates how to configure WinCC visualization between the TP700 Panel and a PC system.

Learning objective:

This module describes the runtime services of the TP700 Panel and other functions of the WinCC

Advanced V11 software.

Typical tasks are performed at a sample plant.

 "Open" and "Save as" of a STEP 7 project

 Inserting an HMI station

 Runtime services of the TP700 Comfort Panel

 Configuring display and operating objects on the operator PC

 HMI HTTP protocol

 Trend view

 Sm@rt Options

Requirements:

To successfully work through this module, the following knowledge is required:

 Proficiency in working with Windows

 Basics of PLC programming with the TIA Portal

(for example, module 020-010 – 'Startup' Programming the SIMATIC S7-300 with TIA Portal V11)

 Blocks for SIMATIC S7-300

(for example, Module 030-010 – Block Types for SIMATIC S7-300)

 WinCC Advanced with Runtime and TP700 Comfort Panel

(e.g. Module 090-010 – S7-300 HMI TP700)

Advanced functions for

PLC programming

Module 30

Basics of PLC

programming

Module 10, Module 20

PROFIBUS PROFINET

Module 60 Module 70

AS interface

Module 50

Safety technology

Module 80

Drive technology

Module 100

Process visualization

(HMI) Module 90

Sensor technology

Module 110

Plant simulation with

SIMIT Module 150

Other programming

languages

Module 40

Industry Sector, IA&DT

SCE Training Curriculum Page 5 of 48 To be used only at Educational and R&D Facilities

SCE_EN_090-020_R1209_ WinCC Advanced Runtime Services

Required hardware and software

1 PC Pentium 4, 1.7 GHz 1 (XP) – 2 (Vista) GB RAM, approx. 2 GB of free hard disk space

Operating system Windows XP Professional SP3 / Windows 7 Professional / Windows 7

Enterprise / Windows 7 Ultimate / Windows 2003 Server R2 / Windows Server 2008 Premium SP1,

Business SP1, Ultimate SP1

2 Software: STEP 7 Professional V11 SP2 (Totally Integrated Automation (TIA) Portal V11) and

WinCC Advanced V11 SP2

3 Ethernet connection between the PC and CPU 315F-2 PN/DP

4 SIMATIC S7-300 PLC, e.g., CPU 315F-2PN/DP with 16DI/16DO signal module.

The inputs must be fed out to a control panel.

5 SIMATIC HMI TP700 Comfort Panel

1 PC

2 STEP 7 Professional and

WinCC Advanced V11

(TIA Portal V11 SP2)

3 Ethernet connection

5 SIMATIC HMI TP700

Comfort Panel

4 S7-300 with

CPU 315F-2 PN/DP

Industry Sector, IA&DT

SCE Training Curriculum Page 6 of 48 To be used only at Educational and R&D Facilities

SCE_EN_090-020_R1209_ WinCC Advanced Runtime Services

2. Notes on programming the SIMATIC S7-300

2.1 SIMATIC S7-300 automation system

The SIMATIC S7-300 automation system is a modular microcontroller system for the low and medium

performance range.

A comprehensive range of modules is available to optimally adapt the system to the automation task

The S7 controller consists of a power supply, a CPU, and input and output modules for digital and

analog signals.

If necessary, communication processors and function modules are also used for special tasks such as

stepper motor control.

The programmable logic controller (PLC) uses the S7 program to monitor and control a machine or a

process. The S7 program scans the I/O modules via input addresses (%I) and addresses their output

addresses (%Q).

The system is programmed with the STEP 7 software.

2.2 STEP 7 Professional V11 (TIA Portal V11) programming software

The STEP 7 Professional V11 (TIA Portal V11) software is the programming tool for the following

automation systems:

- SIMATIC S7-1200

- SIMATIC S7-300

- SIMATIC S7-400

- SIMATIC WinAC

STEP 7 Professional V11 provides the following functions for plant automation:

- Configuration and parameter assignment of the hardware

- Specification of the communication

- Programming

- Testing, commissioning, and servicing with operational/diagnostic functions

- Documentation

- Creation of visualizations for SIMATIC Basic Panels using the integrated WinCC Basic software.

- Visualization solutions for PCs and other panels can also be created with other WinCC software

packages

Support is provided for all functions in a comprehensive online help system.

Industry Sector, IA&DT

SCE Training Curriculum Page 7 of 48 To be used only at Educational and R&D Facilities

SCE_EN_090-020_R1209_ WinCC Advanced Runtime Services

2.3 Operator control and monitoring with WinCC

System description

Since processes are becoming more and more multi-layered and the demands regarding the

functionality of machines and plants are rising, the operator needs a powerful tool to control and monitor

production systems. An HMI system (Human Machine Interface) represents the interface between the

human being (operator) and the process (machine/system). The controller actually controls the process.

That is, there is an interface between the operator and WinCC (on the HMI device) and an interface

between WinCC and the controller.

WinCC is the software to handle all necessary configuring tasks. WinCC Advanced V11 Simulation is

the software for process visualization.

WinCC handles the following tasks:

• Representing the process

The process is mapped to the HMI device. If, for example, a state changes in the process, the display is

updated on the HMI device.

• Operating the process

The operator can use a graphic user interface to operate the process. The operator, for example, can

enter a setpoint for the controller, or start a motor.

• Generating alarms

If critical process states occur in the process, an alarm is triggered automatically; for example, if a

specified limit is exceeded.

• Logging process values and alarms

The HMI system is able to log alarms and process values. Thus, the process can be documented and

older production data can later be accessed.

• Documenting process values and alarms

Alarms and process values can be read out by the HMI system as a log. After a shift, for example, you

can have the production data read out.

• Managing process parameters and machine parameters

The HMI system is able to store parameters for processes and machines in recipes. These parameters

can, for example, be transferred from the HMI device to the controller in one step in order to change

production to another product type.

Industry Sector, IA&DT

SCE Training Curriculum Page 8 of 48 To be used only at Educational and R&D Facilities

SCE_EN_090-020_R1209_ WinCC Advanced Runtime Services

3. Project description

3.1 Hardware configuration

In our sample program for an ink mixing station we use a programming device with WinCC Advanced

V11 and the WinCC Advanced V11 Runtime.

The ink mixing station is controlled using a SIMATIC S7-300. The operator uses a Touch Panel (TP700)

to operate the process via the graphical interface.

The operator, for example, can enter a setpoint for the controller, or start a motor.

The programming device, the SIMATIC S7-300 controller and the TP700 operator panel are

interconnected via the Ethernet interface.

The ink mixing station is connected to the controller via digital and analog inputs and outputs.

PC for configuration

TP700 as HMI device

Tank 1

Tank 2

Tank 3

Industry Sector, IA&DT

SCE Training Curriculum Page 9 of 48 To be used only at Educational and R&D Facilities

SCE_EN_090-020_R1209_ WinCC Advanced Runtime Services

3.2 Station description

An ink mixing station is controlled using a SIMATIC S7-300 in automatic or in manual mode. In the

'Automatic' mode, the three tanks are filled using a two-point control mechanism.

At minimum fill level the supply valve of the corresponding tank is opened automatically and only closed

once the maximum fill level is reached.

The preset program is run when the Start button is pressed.

First, the drain valves are opened and the corresponding target quantities are filled into the container

from the separate tanks.

After closing the drain valves, the mixer motor is started.

At the end of the mixing period and after a short rest period, the drain valve of the container opens and

the finished color mixture is drained.

The start function is enabled as soon as the container is empty.

The start button lamp is lit and a new color mixture can be started.

In "Manual" mode, the automatic drain is terminated; all valves and the mixer motor can then be

operated manually.

The lamps in the buttons for manual operation are lit.

Tank 1

Tank 2

Tank 3

Auto-Man START T1 supply T1 drain T2 supply T2 drain T3 supply T3 drain Container Motor

Industry Sector, IA&DT

SCE Training Curriculum Page 10 of 48 To be used only at Educational and R&D Facilities

SCE_EN_090-020_R1209_ WinCC Advanced Runtime Services

3.3 Previous configuration

The following requirements are to be met with the help of the Panel.

- It is now possible to operate the ink mixing station via the Panel as well.

- The fill levels of the tanks and of the container are to be indicated as bars and also as numerical

value.

- The movement of the mixer motor is to be represented graphically.

- The target quantities are to be entered using the panel.

- The minimum and maximum fill levels of the three tanks can be specified on separate tank screens.

- The Panel can also be used to change operating modes.

- The finished color mixtures are saved as recipe in the Panel.

- The fill levels are monitored and alarms are generated in the event of danger.

- A password must be entered in order to operate the ink mixing station.

- The SIMATIC S7-300 controller communicates with the TP700 Comfort Panel and monitors it via

PROFINET.

3.4 Expanded configuration and task

On the programming device, the STEP 7 Professional V11 configuration software and WinCC Advanced

V11 are used to create an additional process visualization for an operator PC.

The operator PC communicates with the operator panel via tags using an HMI HTTP connection. The

S7-300 controller is accessed solely via the operator panel.

The value of a tag in the memory area (address) of the controller is read by the operator panel and

transferred via an HMI HTTP connection to the operator PC.

The ink mixing station is remotely monitored and remotely operated using the visualization and

the operating screens.

Industry Sector, IA&DT

SCE Training Curriculum Page 11 of 48 To be used only at Educational and R&D Facilities

SCE_EN_090-020_R1209_ WinCC Advanced Runtime Services

4. Inserting an Operator PC in the Ink Mixing Station project

The software is used for project management and programming

'Totally Integrated Automation Portal V11'.

Components such as control, visualization, and networking of the automation solution are created,

assigned parameters, and programmed here using a standard interface.

Online tools are available for the error diagnostics.

In the following section a project is to be opened for SIMATIC S7-300, the project is to be stored under a

different name and adapted to the new requirements.

The central tool is the 'TIA Portal V11', which is opened here by double-clicking.

Industry Sector, IA&DT

SCE Training Curriculum Page 12 of 48 To be used only at Educational and R&D Facilities

SCE_EN_090-020_R1209_ WinCC Advanced Runtime Services

4.1 Loading and re-saving a project template

The project "Ink mixing station_TIA_TP700'" from Module 090-010 is now opened as a template for

this program.

Industry Sector, IA&DT

SCE Training Curriculum Page 13 of 48 To be used only at Educational and R&D Facilities

SCE_EN_090-020_R1209_ WinCC Advanced Runtime Services

'First steps' for configuring are now suggested.

Click 'Open project view'.

Industry Sector, IA&DT

SCE Training Curriculum Page 14 of 48 To be used only at Educational and R&D Facilities

SCE_EN_090-020_R1209_ WinCC Advanced Runtime Services

Start by saving the project under a different name.

In the Project menu click "Save as".

Industry Sector, IA&DT

SCE Training Curriculum Page 15 of 48 To be used only at Educational and R&D Facilities

SCE_EN_090-020_R1209_ WinCC Advanced Runtime Services

'Save' the project under the new name 'Ink mixing station_TIA_TP700_PC'.

Load the project to the S7-300 controller and to the HMI_Panel [TP700 Comfort].

Industry Sector, IA&DT

SCE Training Curriculum Page 16 of 48 To be used only at Educational and R&D Facilities

SCE_EN_090-020_R1209_ WinCC Advanced Runtime Services

To create the operator PC system as WinCC RT Advanced in the project, double-click 'Add new

device' in the selection window.

Select "WinCC RT Advanced" under PC systems for SIMATIC HMI application.

Enter the device name and select the option "Open device view".

Click "OK".

Industry Sector, IA&DT

SCE Training Curriculum Page 17 of 48 To be used only at Educational and R&D Facilities

SCE_EN_090-020_R1209_ WinCC Advanced Runtime Services

The new PC-System_Advanced you added is opened in the device view.

Industry Sector, IA&DT

SCE Training Curriculum Page 18 of 48 To be used only at Educational and R&D Facilities

SCE_EN_090-020_R1209_ WinCC Advanced Runtime Services

From the catalog, insert the communication module IE general in slot 2 of the operator PC."

Industry Sector, IA&DT

SCE Training Curriculum Page 19 of 48 To be used only at Educational and R&D Facilities

SCE_EN_090-020_R1209_ WinCC Advanced Runtime Services

Connect the communication module with the PN/IE_1 network and enter the IP address of the operator

PC. In our case, the programming device is also be operator PC.

Click the Network view tab.

Industry Sector, IA&DT

SCE Training Curriculum Page 20 of 48 To be used only at Educational and R&D Facilities

SCE_EN_090-020_R1209_ WinCC Advanced Runtime Services

The PC-System_Advanced is connected via Ethernet interface with the HMI_Panel and the CPU.

Page is loading ...

Siemens TIA Portal Module 090-020 User manual

Siemens TIA Portal Module 090-020 User manual

Siemens TIA Portal Module 090-020 User manual

Related papers

Other documents