2. SCE
  3. SCE-PSK24

SCE SCE-PSK24, SCE-342424SSWS, SCE-342424WS, SCE-642424SSWS, SCE-642424WS, SCE-642432SSWS, SCE-642432WS, SCE-PSK32 Installation Information

  • I've reviewed the installation instructions for the Saginaw Control panel support models SCE-PSK24 and SCE-PSK32. This document outlines how to properly install the panel supports to an enclosure using channel nuts and screws, allowing for height adjustment and the addition of optional rack angles. I'm ready to answer any questions you may have about the installation process.
  • How many channel nuts are included?
    How many screws are used to install panel supports?
    Are rack angles included with Panel Supports?
PANEL SUPPORT FOR RACK ANGLES
1
SCE-PSK24
SCE-PSK32
ITEM
#
PART NAME
QTY.
1
3/8-16 FLANGE NUT
4
2
3/8-16 CHANNEL NUTS
8
3
PANEL SUPPORTS
4
4
3/8-16 X 1 HEX HEAD SCREW
8
5
SCE-72RP24F6 (RP) RACK ANGLES
NOT
INCLUDED
SCE-72RA24F6 (RA) RACK ANGLES
NOT
INCLUDED
SECTION VIEW:
INSIDE L.H. WALL OF
WORKSTATION ENCLOSURE
INSTALLATION INSTRUCTIONS
1. INSTALL (4) CHANNEL NUTS (ITEM 2) INTO
CHANNELS PROVIDED ON THE RIGHT AND LEFT SIDE
OF ENCLOSURE.
2. ATTACH THE PANEL SUPPORTS (ITEM 3) TO THE
CHANNELS AS SHOWN, USE SCREWS (ITEM 4) TO
SECURE THE PANEL SUPPORTS TO THE ENCLOSURE.
3. ADJUST THE PANEL SUPPORTS TO THE DESIRED
HEIGHT AND TIGHTEN SCREWS SECURELY.
4. INSTALL THE OPTIONAL (RA) OR (RP) RACK ANGLES
(ITEM 5) AS SHOWN.
EXPLODED VIEW
ASSEMBLED VIEW
/