AUKEY PA-X06 is a USB wall outlet with a night light. Here is some brief product information for you:
- Conveniently charges two electronic devices simultaneously via the USB ports (DC 5V 2.1A Max)
- Protects your devices from power surges and spikes with a 300-joule energy absorption rating
- Easily locate and illuminate the outlet in the dark with the LED night light
- Night light operation controlled by a light sensor and on/off button
- Phone stand on the top of the wall outlet provides a convenient place to rest your phone while charging
- Designed for use over a standard duplex wall outlet (AC 125V 15A 60Hz)
AUKEY PA-X06 is a USB wall outlet with a night light. Here is some brief product information for you:
- Conveniently charges two electronic devices simultaneously via the USB ports (DC 5V 2.1A Max)
- Protects your devices from power surges and spikes with a 300-joule energy absorption rating
- Easily locate and illuminate the outlet in the dark with the LED night light
- Night light operation controlled by a light sensor and on/off button
- Phone stand on the top of the wall outlet provides a convenient place to rest your phone while charging
- Designed for use over a standard duplex wall outlet (AC 125V 15A 60Hz)
User Manual
USB Wall Outlet with Night Light
Getting Started
The PA-X06 is designed for use over a standard duplex (two socket) wall
outlet.
● Plug the PA-X06 into a wall socket
● Connect your electronic and electrical devices to this outlet for power
● Unplug your devices when fully charged or not in use
Night Light Operation
When the PA-X06 is plugged in and its light sensor is receiving low ambient
light input, the LED night light will be on. The light also helps to locate and
illuminate the wall outlet in the dark for more convenient use. Press the
night light on/off button to turn on/off operation of the light in these
low-light conditions.
Phone Stand Use
While charging, conveniently place your device on the phone stand
area on top of the wall outlet.
Product Care & Use
● Designed for indoor use only
● Only use with properly grounded outlets
● Do not overload. The power demand of connected AC appliances
should not exceed the maximum AC power output
● Do not plug into another power strip or extension cable
● Unplug your devices during thunderstorms
● Keep it away from liquids and extreme heat
Warranty & Customer Support
For questions, support, or warranty claims, contact us at the address below
that corresponds with your region. Please include your Amazon order
number and product model number.
Amazon US orders: [email protected]
Amazon EU orders: [email protected]
Amazon CA orders: [email protected]
Amazon JP orders: [email protected]
*Please note, AUKEY can only provide after sales service for products purchased directly
from AUKEY. If you have purchased from a different seller, please contact them directly for
service or warranty issues.
Thank you for purchasing the AUKEY PA-X06 USB Wall Outlet with Night
Light. Please read this user manual carefully and keep it for future
reference. If you need any assistance, please contact our support team
with your product model number and Amazon order number.
Package Contents
USB Wall Outlet with Night Light
User Manual
Warranty Card
Specifications
Model
Input
AC Output
Maximum AC Power Output
Energy Absorption Rating
USB Output 1 | 2
Dimensions
Weight
PA-X06
AC 125V 15A 60Hz
125V 15A 60Hz
1875W
300 Joules
DC 5V 2.1A Max
129 x 84 x 35mm / 5.08” x 3.31” x 1.22”
198g / 4.62oz
Getting Started
The PA-X06 is designed for use over a standard duplex (two socket) wall
outlet.
● Plug the PA-X06 into a wall socket
● Connect your electronic and electrical devices to this outlet for power
● Unplug your devices when fully charged or not in use
Night Light Operation
When the PA-X06 is plugged in and its light sensor is receiving low ambient
light input, the LED night light will be on. The light also helps to locate and
illuminate the wall outlet in the dark for more convenient use. Press the
night light on/off button to turn on/off operation of the light in these
low-light conditions.
Phone Stand Use
While charging, conveniently place your device on the phone stand
area on top of the wall outlet.
Product Care & Use
● Designed for indoor use only
● Only use with properly grounded outlets
● Do not overload. The power demand of connected AC appliances
should not exceed the maximum AC power output
● Do not plug into another power strip or extension cable
● Unplug your devices during thunderstorms
● Keep it away from liquids and extreme heat
Warranty & Customer Support
For questions, support, or warranty claims, contact us at the address below
that corresponds with your region. Please include your Amazon order
number and product model number.
Amazon US orders: [email protected]
Amazon EU orders: [email protected]
Amazon CA orders: [email protected]
Amazon JP orders: [email protected]
*Please note, AUKEY can only provide after sales service for products purchased directly
from AUKEY. If you have purchased from a different seller, please contact them directly for
service or warranty issues.
- 01 -
Getting Started
The PA-X06 is designed for use over a standard duplex (two socket) wall
outlet.
● Plug the PA-X06 into a wall socket
● Connect your electronic and electrical devices to this outlet for power
● Unplug your devices when fully charged or not in use
Night Light Operation
When the PA-X06 is plugged in and its light sensor is receiving low ambient
light input, the LED night light will be on. The light also helps to locate and
illuminate the wall outlet in the dark for more convenient use. Press the
night light on/off button to turn on/off operation of the light in these
low-light conditions.
Phone Stand Use
While charging, conveniently place your device on the phone stand
area on top of the wall outlet.
Product Care & Use
● Designed for indoor use only
● Only use with properly grounded outlets
● Do not overload. The power demand of connected AC appliances
should not exceed the maximum AC power output
● Do not plug into another power strip or extension cable
● Unplug your devices during thunderstorms
● Keep it away from liquids and extreme heat
Warranty & Customer Support
For questions, support, or warranty claims, contact us at the address below
that corresponds with your region. Please include your Amazon order
number and product model number.
Amazon US orders: [email protected]
Amazon EU orders: [email protected]
Amazon CA orders: [email protected]
Amazon JP orders: [email protected]
*Please note, AUKEY can only provide after sales service for products purchased directly
from AUKEY. If you have purchased from a different seller, please contact them directly for
service or warranty issues.
Phone Stand
USB Output
Night Light
AC Outlets
Night Light On / Off Button
Light Sensor
Product Diagram
- 02 -
Getting Started
The PA-X06 is designed for use over a standard duplex (two socket) wall
outlet.
● Plug the PA-X06 into a wall socket
● Connect your electronic and electrical devices to this outlet for power
● Unplug your devices when fully charged or not in use
Night Light Operation
When the PA-X06 is plugged in and its light sensor is receiving low ambient
light input, the LED night light will be on. The light also helps to locate and
illuminate the wall outlet in the dark for more convenient use. Press the
night light on/off button to turn on/off operation of the light in these
low-light conditions.
Phone Stand Use
While charging, conveniently place your device on the phone stand
area on top of the wall outlet.
Product Care & Use
● Designed for indoor use only
● Only use with properly grounded outlets
● Do not overload. The power demand of connected AC appliances
should not exceed the maximum AC power output
● Do not plug into another power strip or extension cable
● Unplug your devices during thunderstorms
● Keep it away from liquids and extreme heat
Warranty & Customer Support
For questions, support, or warranty claims, contact us at the address below
that corresponds with your region. Please include your Amazon order
number and product model number.
Amazon US orders: [email protected]
Amazon EU orders: [email protected]
Amazon CA orders: [email protected]
Amazon JP orders: [email protected]
*Please note, AUKEY can only provide after sales service for products purchased directly
from AUKEY. If you have purchased from a different seller, please contact them directly for
service or warranty issues.
- 03 -
Getting Started
The PA-X06 is designed for use over a standard duplex (two socket) wall
outlet.
● Plug the PA-X06 into a wall socket
● Connect your electronic and electrical devices to this outlet for power
● Unplug your devices when fully charged or not in use
Night Light Operation
When the PA-X06 is plugged in and its light sensor is receiving low ambient
light input, the LED night light will be on. The light also helps to locate and
illuminate the wall outlet in the dark for more convenient use. Press the
night light on/off button to turn on/off operation of the light in these
low-light conditions.
Phone Stand Use
While charging, conveniently place your device on the phone stand
area on top of the wall outlet.
Product Care & Use
● Designed for indoor use only
● Only use with properly grounded outlets
● Do not overload. The power demand of connected AC appliances
should not exceed the maximum AC power output
● Do not plug into another power strip or extension cable
● Unplug your devices during thunderstorms
● Keep it away from liquids and extreme heat
Warranty & Customer Support
For questions, support, or warranty claims, contact us at the address below
that corresponds with your region. Please include your Amazon order
number and product model number.
Amazon US orders: [email protected]
Amazon EU orders: [email protected]
Amazon CA orders: [email protected]
Amazon JP orders: [email protected]
*Please note, AUKEY can only provide after sales service for products purchased directly
from AUKEY. If you have purchased from a different seller, please contact them directly for
service or warranty issues.
- 04 -
Getting Started
The PA-X06 is designed for use over a standard duplex (two socket) wall
outlet.
● Plug the PA-X06 into a wall socket
● Connect your electronic and electrical devices to this outlet for power
● Unplug your devices when fully charged or not in use
Night Light Operation
When the PA-X06 is plugged in and its light sensor is receiving low ambient
light input, the LED night light will be on. The light also helps to locate and
illuminate the wall outlet in the dark for more convenient use. Press the
night light on/off button to turn on/off operation of the light in these
low-light conditions.
Phone Stand Use
While charging, conveniently place your device on the phone stand
area on top of the wall outlet.
Product Care & Use
● Designed for indoor use only
● Only use with properly grounded outlets
● Do not overload. The power demand of connected AC appliances
should not exceed the maximum AC power output
● Do not plug into another power strip or extension cable
● Unplug your devices during thunderstorms
● Keep it away from liquids and extreme heat
Warranty & Customer Support
For questions, support, or warranty claims, contact us at the address below
that corresponds with your region. Please include your Amazon order
number and product model number.
Amazon US orders: [email protected]
Amazon EU orders: [email protected]
Amazon CA orders: [email protected]
Amazon JP orders: [email protected]
*Please note, AUKEY can only provide after sales service for products purchased directly
from AUKEY. If you have purchased from a different seller, please contact them directly for
service or warranty issues.
AUKEY International Ltd.
www.aukey.com | [email protected]
No.102, Building P09, Electronics Trade Center
Huanan City, Pinghu Town, Longgang District
Shenzhen, Guangdong, 518111, CN
Model: PA-X06
-
1
-
2
-
3
-
4
-
5
-
6
AUKEY PA-X06 is a USB wall outlet with a night light. Here is some brief product information for you:
- Conveniently charges two electronic devices simultaneously via the USB ports (DC 5V 2.1A Max)
- Protects your devices from power surges and spikes with a 300-joule energy absorption rating
- Easily locate and illuminate the outlet in the dark with the LED night light
- Night light operation controlled by a light sensor and on/off button
- Phone stand on the top of the wall outlet provides a convenient place to rest your phone while charging
- Designed for use over a standard duplex wall outlet (AC 125V 15A 60Hz)
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
AUKEY PA-X07 User manual
-
AUKEY PA-X09 User manual
-
-
-
-
-
-
-
-
Other documents
-
VALKIA AKL01 User manual
-
BESTEK MRJ1870KUGY-12FT User manual
-
Husky 647-123100H31 Specification
-
WAGO 8-Port IO-Link Master Class A User manual
-
Barco iCon H600 User guide
-
Barco iCon H250 User guide
-
Barco RLM R6+ Performer User manual
-
Barco iQ Pro G350 User guide
-
Barco iD LR-6 User guide
-
HP (Hewlett-Packard) LaserJet 4200 Printer series User manual
