User Manual
Cube Power Strip
Thank you for purchasing the AUKEY PA-X09 Cube Power
Strip. Please read this user manual carefully and keep it
for future reference. If you need any assistance, please
contact our support team with your product model number
and Amazon order number.
Package Contents
Cube Power Strip
User Manual
Warranty Card
Product Diagram
Getting Started
1. Plug the PA-X09 into a wall outlet
2. Connect your electrical and electronic devices to the
AC outlets and USB ports on the PA-X09 for power
3. Unplug your devices when fully charged or not in use
FAQ
How does the ‘Surge Protection Button’ work?
The surge protection button is pressed in by default. While
the power strip is connected to power and the button
remains pressed in, surge protection is active. The power
strip will be sacrificed as designed during a power surge
to save your connected equipment, but may not protect
your devices from surges and spikes in the future if they
exceed the energy absorption rating. If the power strip’s
- EN -
protection system is triggered by a surge or other power
fault, it will cut power and the surge protection button will
pop out. To reset, disconnect & reconnect the power strip;
then press the surge protection button. If this doesn’t work,
replace the power strip.
Product Care & Use
● Keep it away from liquids and extreme heat
● Designed for indoor use only
● Only use with properly grounded outlets
● The power demand of connected devices must not exceed
the total AC power output
● Unplug the product during thunderstorms
● If the power strip cuts off power (but your power circuit
is operating correctly), try disconnecting & reconnecting
the power strip; then make sure the surge protection
button is pressed in (see FAQ above)
Warranty & Customer Support
For questions, support, or warranty claims, contact us at the
address below that corresponds with your region. Please
include your Amazon order number and product model
number.
Amazon US orders: [email protected]
Amazon EU orders: [email protected]
Amazon CA orders: [email protected]
Amazon JP orders: [email protected]
*Please note, AUKEY can only provide after sales service for products purchased
directly from AUKEY. If you have purchased from a different seller, please contact
them directly for service or warranty issues.
AC Outlets
USB Outlets
Surge Protection Button
Getting Started
1. Plug the PA-X09 into a wall outlet
2. Connect your electrical and electronic devices to the
AC outlets and USB ports on the PA-X09 for power
3. Unplug your devices when fully charged or not in use
FAQ
How does the ‘Surge Protection Button’ work?
The surge protection button is pressed in by default. While
the power strip is connected to power and the button
remains pressed in, surge protection is active. The power
strip will be sacrificed as designed during a power surge
to save your connected equipment, but may not protect
your devices from surges and spikes in the future if they
exceed the energy absorption rating. If the power strip’s
Specifications
Model
Input / Output
Total AC Power Output
USB Power Output
Energy Absorption Rating
Dimensions
Weight
PA-X09
AC 125V 15A 60Hz
1875W
5V 2.4A total
380 Joules
67 x 66 x 66mm / 2.6” x 2.6” x 2.6”
474g / 16.72oz
- EN -
protection system is triggered by a surge or other power
fault, it will cut power and the surge protection button will
pop out. To reset, disconnect & reconnect the power strip;
then press the surge protection button. If this doesn’t work,
replace the power strip.
Product Care & Use
● Keep it away from liquids and extreme heat
● Designed for indoor use only
● Only use with properly grounded outlets
● The power demand of connected devices must not exceed
the total AC power output
● Unplug the product during thunderstorms
● If the power strip cuts off power (but your power circuit
is operating correctly), try disconnecting & reconnecting
the power strip; then make sure the surge protection
button is pressed in (see FAQ above)
Warranty & Customer Support
For questions, support, or warranty claims, contact us at the
address below that corresponds with your region. Please
include your Amazon order number and product model
number.
Amazon US orders: [email protected]
Amazon EU orders: [email protected]
Amazon CA orders: [email protected]
Amazon JP orders: [email protected]
*Please note, AUKEY can only provide after sales service for products purchased
directly from AUKEY. If you have purchased from a different seller, please contact
them directly for service or warranty issues.
Getting Started
1. Plug the PA-X09 into a wall outlet
2. Connect your electrical and electronic devices to the
AC outlets and USB ports on the PA-X09 for power
3. Unplug your devices when fully charged or not in use
FAQ
How does the ‘Surge Protection Button’ work?
The surge protection button is pressed in by default. While
the power strip is connected to power and the button
remains pressed in, surge protection is active. The power
strip will be sacrificed as designed during a power surge
to save your connected equipment, but may not protect
your devices from surges and spikes in the future if they
exceed the energy absorption rating. If the power strip’s
protection system is triggered by a surge or other power
fault, it will cut power and the surge protection button will
pop out. To reset, disconnect & reconnect the power strip;
then press the surge protection button. If this doesn’t work,
replace the power strip.
Product Care & Use
● Keep it away from liquids and extreme heat
● Designed for indoor use only
● Only use with properly grounded outlets
● The power demand of connected devices must not exceed
the total AC power output
● Unplug the product during thunderstorms
● If the power strip cuts off power (but your power circuit
is operating correctly), try disconnecting & reconnecting
the power strip; then make sure the surge protection
button is pressed in (see FAQ above)
Warranty & Customer Support
For questions, support, or warranty claims, contact us at the
address below that corresponds with your region. Please
include your Amazon order number and product model
number.
Amazon US orders: [email protected]
Amazon EU orders: [email protected]
Amazon CA orders: [email protected]
Amazon JP orders: [email protected]
*Please note, AUKEY can only provide after sales service for products purchased
directly from AUKEY. If you have purchased from a different seller, please contact
them directly for service or warranty issues.
- EN -
Model: PA-X09
AUKEY International Ltd.
www.aukey.com | [email protected]
No.102, Building P09, Electronics Trade Center
Huanan City, Pinghu Town, Longgang District
Shenzhen, Guangdong, 518111, CN
-
1
-
2
-
3
-
4
-
5
AUKEY PA-X09 User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
AUKEY GM-F3 User manual
-
AUKEY PA-X06 User manual
-
-
AUKEY GM-F1 User manual
-
-
-
-
-
-
Other documents
-
VALKIA AKL01 User manual
-
BESTEK MRJ1870KUGY-12FT User manual
-
Husky 647-123100H31 Specification
-
B&B Electronics Modem User manual
-
Mitsubishi Electric MELSEC iQ-R I/O Module User manual
-
CommScope S1000C User manual
-
-
AICOK MK-H317E1B User manual
-
Remeha Avanta Plus Gas 310/610 Quick start guide
-
Triton RAC-VP-X16-A1 Datasheet
