INSTEON Water Leak Sensor Quick start guide
- Type
- Quick start guide
INSTEON Leak Sensor
Quick Start Guide
INSTEON Leak Sensor
AA Battery
(Included)
Water Contacts
(Metal)
(Cover Removed)
Set Button Status LED
For the complete Owner’s Manual and
more, visit: insteon.com/support
Sensor Placement
Locate the Leak Sensor in a location that may
experience a water leak.
Enhanced with the INSTEON Hub
For text message or email alerts, your Leak
Sensor must be linked to the INSTEON Hub.
!
www
1
Follow the on-screen instructions to add
your Leak Sensor to the INSTEON Hub.
Linking to the Hub
+
If not using the Hub, refer to the instructions
that came with your product.
!
2
When prompted, press and hold Leak
Sensor’s set button.
If not using the Hub, refer to the instructions
that came with your product.
1
Test Alerts
Place your sensor onto a wet sponge or
tray of water no more than 1/8” deep.
2
NEW
X
After you receive an alert on your mobile
device, reset the Leak Sensor by tapping
the set button and return the Leak
Sensor to its location.
Rev 03.28.14
Protected under U.S. and foreign patents (see www.insteon.com/patents)
©2014 INSTEON
!
!
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
INSTEON Water Leak Sensor Quick start guide
- Type
- Quick start guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
INSTEON 2242-522 Owner's manual
-
INSTEON Hub (2012) Owner's manual
-
-
-
-
-
-
-
-
