DVR

Evertech DVR Operating instructions

  • Hello, I've reviewed the user manual regarding downloading footage from a DVR to a USB flash drive. This document explains step-by-step instructions on accessing the menu, initiating the backup, and selecting a backup format, mainly MP4. I'm ready to assist you with any specific questions you have about this process.
  • How do I connect a USB flash drive?
    How do I access the main menu?
    Where can I choose to back up the footage?
    What format is recommended for backup?
    How can I play video records?
How to download the footage on USB flash drive
1. Connect USB flash drive to USB port of the DVR.
2. Access Main Menu (right click with mouse on home screen, choose main menu)
3. Choose Record, then Click on Backup as shown on below screenshots:
4. If you have connected USB flash drive, it should appear in Backup. In case it doesn’t
show, please click detect. Choose USB Disk and Click Backup:
5. In Backup window, choose Channel, Start time and end time. Click Add. You are
able to add more than one footage in this list. Once you add all the footage you need,
please select them all.
6. Choose Backup format: H26X, AVI or MP4. We recommend to choose MP4 and click
Start, the process may take few minutes depending on video footage capacity, once
its completed, the message Backup Finished will pop up on the screen.
7. You can playback the downloaded MP4 video with VLC player or Windows Media Player.
You might need to download extra codecs for Media Player.
/