Winmate W10IB3S-PCH2-PoE S-Series User manual

10.1" S-Series HMI

W10IB3S-PCH2AC-PoE (with LED light bar)

W10IB3S-PCH2-PoE (without LED light bar)

Slim-line

User Manual

Version 1.4

Document Part Number: 9152111I100M

ii

Preface

Copyright Notice

No part of this document may be reproduced, copied, translated, or transmitted in any form

or by any means, electronic or mechanical, for any purpose, without the prior written

permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective

owners.

Disclaimer

We reserve the right to make changes, without notice, to any product, including circuits

and/or software described or contained in this manual in order to improve design and/or

performance. We assume no responsibility or liability for the use of the described product(s)

conveys no license or title under any patent, copyright, or masks work rights to these

products, and make no representations or warranties that these products are free from

patent, copyright, or mask work right infringement, unless otherwise specified. Applications

that are described in this manual are for illustration purposes only. We make no

representation or guarantee that such application will be suitable for the specified use

without further testing or modification.

iii

Warranty

Our warranty guarantees that each of its products will be free from material and

workmanship defects for a period of one year from the invoice date. If the customer discovers

a defect, we will, at his/her option, repair or replace the defective product at no charge to the

customer, provide it is returned during the warranty period of one year, with transportation

charges prepaid. The returned product must be properly packaged in its original packaging to

obtain warranty service. If the serial number and the product shipping data differ by over 30

days, the in-warranty service will be made according to the shipping date. In the serial

numbers the third and fourth two digits give the year of manufacture, and the fifth digit

means the month (e. g., with A for October, B for November and C for December).

For example, the serial number 1W14Axxxxxxxx means October of year 2014.

Customer Service

We provide a service guide for any problem by the following steps: First, visit the website of

our distributor to find the update information about the product. Second, contact with your

distributor, sales representative, or our customer service center for technical support if you

need additional assistance.

You may need the following information ready before you call:

 Product serial number

 Software (OS, version, application software, etc.)

 Description of complete problem

 The exact wording of any error messages

In addition, free technical support is available from our engineers every business day. We are

always ready to give advice on application requirements or specific information on the

installation and operation of any of our products.

iv

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful information or to

alert you to the potential for hardware damage or personal injury. These are Notes, Important,

Cautions, and Warnings. The following is an example of each type of advisory.

NOTE:

A note is used to emphasize helpful information

IMPORTANT:

An important note indicates information that is important for you to know.

CAUTION/ ATTENTION

A Caution alert indicates potential damage to hardware and explains how to avoid the

potential problem.

Unealerted’ attention indique un dommage possible à l’équipement et explique

comment éviter le problem potentiel.

WARNING!/AVERTISSEMENT!

An Electrical Shock Warning indicates the potential harm from electrical hazards and

how to avoid the potential problem.

Un Avertissement de Choc Électriqueindique le potentiel de chocssur des

emplacements électriques et comment éviterces problèmes.

ALTERNATING CURRENT / MISE À LE TERRE!

The Protective Conductor Terminal (Earth Ground) symbol indicates the potential

risk of serious electrical shock due to improper grounding.

Le symbole de Miseà Terre indique le risqué potential de choc électrique grave à la

terre incorrecte.

v

Safety Information

WARNING! / AVERTISSEMENT!

Always completely disconnect the power cord from your chassis whenever

you work with the hardware. Do not make connections while the power is

on. Sensitive electronic components can be damaged by sudden power

surges. Only experienced electronics personnel should open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis lorsque vous

travaillez sur celui-ci. Ne pas brancher de connections lorsque l’alimentation

est présente. Des composantes électroniques sensibles peuvent être

endommagées par des sauts d’alimentation. Seulement du personnel

expérimenté devrait ouvrir ces chassis.

CAUTION/ATTENTION

Always ground yourself to remove any static charge before touching the CPU

card. Modern electronic devices are very sensitive to static electric charges. As

a safety precaution, use a grounding wrist strap at all times. Place all

electronic components in a static-dissipative surface or static-shielded bag

when they are not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute charge statique

avant de toucher la carte CPU. Les équipements électroniques moderns sont

très sensibles aux décharges d’électricité statique. Toujours utiliser un

bracelet de mise à la terre comme précaution. Placer toutes les composantes

électroniques sur une surface conçue pour dissiper les charge, ou dans un sac

anti-statique lorsqu’elles ne sont pas dans le chassis.

vi

Safety Precautions

For your safety carefully read all the safety instructions before using the device. Keep this

user manual for future reference.

 Always disconnect this equipment from any AC outlet before cleaning. Do not use

liquid or spray detergents for cleaning. Use a damp cloth.

 For pluggable equipment, the power outlet must be installed near the equipment

and must be easily accessible.

 Keep this equipment away from humidity.

 Put this equipment on a reliable surface during installation. Dropping it or letting it

fall could cause damage.

 The openings on the enclosure are for air convection and to protect the equipment

from overheating.

CAUTION/ATTENTION

Do not cover the openings!

Ne pas couvrir les ouvertures!

 Before connecting the equipment to the power outlet make sure the voltage of the

power source is correct.

 Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

 If the equipment is not used for a long time, disconnect it from the power source to

avoid damage by transient over-voltage.

 Never pour any liquid into an opening. This could cause fire or electrical shock.

 Never open the equipment. For safety reasons, only qualified service personnel

should open the equipment.

 All cautions and warnings on the equipment should be noted.

*Let service personnel to check the equipment in case any of the following problems

appear:

o The power cord or plug is damaged.

o Liquid has penetrated into the equipment.

o The equipment does not work well or you cannot get it to work according

to the user manual.

o The equipment has been dropped and damaged.

o The equipment has obvious signs of breakage.

 Do not leave this equipment in an uncontrolled environment where the storage

temperature is below -20°C (-4°F) or above 60°C (140°F). It may damage the

equipment.

vii

CAUTION/ATTENTION

Use the recommended mounting apparatus to avoid risk of injury.

Utiliser l’appareil de fixation recommandé pour éliminer le risque

de blessure.

WARNING!/AVERTISSEMENT!

Only use the connection cords that come with the product .When

in doubt, please contact the manufacturer.

Utiliser seulement les cordons d’alimentation fournis avec le

produit. Si vous doutez de leur provenance, contactez le

manufacturier.

WARNING!/AVERTISSEMENT!

Always ground yourself against electrostatic damage to the

device.

Toujours vérifier votre mise à la terre afin que l’équipement ne se

décharge pas sur vous.

 Cover workstations with approved anti-static material. Use a wrist strap connected to a

work surface and properly grounded tools and equipment.

 Use anti-static mats, heel straps, or air ionizer for added protection.

 Handle electrostatic-sensitive components, PCB’s and assemblies by the case or the edge

of the board.

 Avoid contact with pins, leads, or circuitry.

 Turn off power and input signals before inserting and removing connectors or test

equipment.

 Keep the work area free of non-conductive materials, such as ordinary plastic assembly

aids and Styrofoam.

 Use filed service tools, such as cutters, screwdrivers, and vacuum cleaners that are

conductive.

 Always put drivers and PCB’s component side on anti-static foam.

viii

Important Information

Countries/ Area

Symbol

This equipment complies with essential requirements

of:

European Union

Electromagnetic Compatibility Directive(2014/30/EU)

Low Voltage Directive (2014/35/EU)

Restrictions of the use of certain hazardous substances

(RoHS) Directive (2011/65/EU)

USA

FCC Part 15 Subpart B Regulations Class B

Federal Communications Commission Radio Frequency Interface Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

 This device may not cause harmful interference.

 This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class "B" digital

device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct the interference

at him own expense.

ix

European Union

This equipment is in conformity with the requirement of the following EU legislations and

harmonized standards. Product also complies with the Council directions.

Electromagnetic Compatibility Directive (2014/30/EU)

 EN55024: 2010 EN 55022: 2010 Class B

o IEC61000-4-2: 2009

o IEC61000-4-3: 2006+A1: 2007+A2: 2010

o IEC61000-4-4: 2012

o IEC61000-4-5: 2014

o IEC61000-4-6: 2013

o IEC61000-4-8: 2010

o IEC61000-4-11: 2004

 EN55022: 2010/AC:2011

 EN61000-3-2:2014

 EN61000-3-3:2013

Low Voltage Directive (2014/35/EU)

 EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013

x

About This User Manual

This User Manual provides information about using the Winmate® 10.1” S-Series HMI. The

documentation set for the 10.1” S-Series HMI provides information for specific user needs, and

includes:

 10.1” S-Series HMI Quick Start Guide - describes how to get the HMI up and running.

 10.1” S-Series HMI User Manual – contains detailed description on how to use the HMI, its

components and features.

NOTE:

Some pictures in this guide are samples and can differ from actual product.

Document Revision History

Version

Date

Note

1.1

15-Jan-2016

Update BIOS Setup, mounting solutions, connector

pinouts

1.2

21-Apr-2016

Add Appendix A LED Light Bar Adjustment with RS-

232 Settings

1.3

3-Jun-2016

New Hot Tab user interface, new light bar interface

and new RFID interface.

1.4

17-Aug-2016

Add How to Enable Watchdog, Using Front Camera.

xi

Contents

Preface ........................................................................................................................................ ii

About This User Manual ............................................................................................................... x

1 Introduction .............................................................................................................................. 1

1.1 Product Features .................................................................................................................. 1

1.2 Hardware Specifications ...................................................................................................... 2

1.3 Software Support ................................................................................................................. 3

1.4 Packing List ........................................................................................................................... 4

1.4.1 Standard Accessories ................................................................................................. 4

1.4.2 Optional Accessories ................................................................................................. 5

1.5 Appearance .......................................................................................................................... 7

1.6 Dimensions ........................................................................................................................... 8

2 Getting Started.......................................................................................................................... 2

2.1 Powering On ......................................................................................................................... 2

2.1.1 AC Adapter Components ........................................................................................... 2

2.1.2 Power Considerations ............................................................................................... 2

2.1.3 Connecting the Power ............................................................................................... 3

2.2 Connector Pinouts ............................................................................................................... 4

2.2.1 DC in Terminal Block Connector ................................................................................ 4

2.2.2 POE/LAN Connector .................................................................................................. 4

2.2.3 Serial Port Connector ................................................................................................ 4

2.2.4 USB 2.0/ USB 3.0 Connector ...................................................................................... 4

2.2.5 HDMI Connector ........................................................................................................ 5

2.2.6 Digital I/O Connector ................................................................................................. 5

2.3 Turning On/ Off the Device .................................................................................................. 6

2.4 Configuring Serial Port Settings ........................................................................................... 7

3 Operating the HMI Device ......................................................................................................... 9

3.1 Operating System ................................................................................................................. 9

3.2 System Settings .................................................................................................................... 9

3.2.1 Hot Tab Menu ............................................................................................................ 9

3.2.2 Utilities..................................................................................................................... 10

xii

3.2.3 Brightness ................................................................................................................ 10

3.2.4 Volume .................................................................................................................... 10

3.2.5 LED Light Bar (Easy-Testing) .................................................................................... 10

3.2.6 Performance ............................................................................................................ 11

3.2.7 Touch Lock ............................................................................................................... 11

3.3 Using HF RFID Reader ........................................................................................................ 12

3.3.1 Reading Mode ......................................................................................................... 13

3.3.2 Writing Mode .......................................................................................................... 13

3.4 Using Front Camera ........................................................................................................... 14

3.4.1 Opening the Camera ............................................................................................... 14

3.4.2 Shooting Photos ...................................................................................................... 15

3.4.3 Recording Videos ..................................................................................................... 16

3.4.4 Camera Settings ....................................................................................................... 16

3.3 How to Enable Watchdog .................................................................................................. 18

4 Driver Installation ................................................................................................................... 20

4.1 Installing Chipset Driver ..................................................................................................... 20

4.2 Installing Graphics Driver ................................................................................................... 23

4.3 Installing Intel Sideband Fabric Device (Intel MBI) Driver (Windows 8) ............................ 24

4.4 Installing Intel Trusted Engine Interface (Intel TXE) Driver ............................................... 25

4.5 Installing Intel Network Connections ................................................................................. 26

4.6 Installing Audio Driver ........................................................................................................ 27

4.7 Installing USB 3.0 Driver (Windows 7) ............................................................................... 28

5 BIOS Setup .............................................................................................................................. 30

5.1 When and How to Use BIOS Setup .................................................................................... 30

5.2 BIOS Functions ................................................................................................................... 31

5.2.1 Main Menu .............................................................................................................. 32

5.2.2 Advanced Menu ...................................................................................................... 33

5.2.3 Chipset Menu .......................................................................................................... 50

5.2.4 Security Menu ......................................................................................................... 51

5.2.5 Boot Configuration .................................................................................................. 52

5.2.6 Save& Exit ................................................................................................................ 53

xiii

5.3 Using Recovery Wizard to Restore Computer ................................................................... 55

6 Mounting Solutions ................................................................................................................. 58

6.1 Cable Mounting Considerations ........................................................................................ 58

6.2 Safety Precautions ............................................................................................................. 58

6.3 Mounting Guide ................................................................................................................. 59

6.3.1 VESA Mount ............................................................................................................. 59

6.3.2 Flush Mount / Panel Mount .................................................................................... 60

6.4 Optional Mounting Solutions ............................................................................................. 61

6.4.1 Front Side Wall Mount ............................................................................................ 61

6.4.2 Desk Stand ............................................................................................................... 62

7 Technical Support .................................................................................................................... 64

7.1 Software Developer Support ............................................................................................. 64

7.2 Problem Report Form ........................................................................................................ 65

Appendix A: LED Light Bar Adjustment ....................................................................................... 67

Appendix B: HF RFID Reader Specifications ................................................................................. 71

10.1” S-Series HMI

1

Introduction

This chapter gives you product overview,

describes features and hardware

specification. You will find all accessories

that come with the HMI device in the

packing list. Mechanical dimensions and

drawings included in this chapter.

User Manual Chapter 1 Introduction

10.1” S-Series HMI

1

1 Introduction

Interactive and smart automation systems of intelligent buildings are in a fast growing

phase. Winmate multi-touch S-Series HMI is suitable for home automation and room

management systems. Flat surface is easy-to-clean and delivers aesthetically pleasing

look for any interior. The device provides real time update for booking status and

available schedule, or performs as a synchronous display in meetings.

S-Series HMI run on 1.83GHz Intel® Celeron® N2930 processor and support Windows 10

IoT, Windows Embedded 8.1 Industry Pro, Windows Embedded 8Standard, Windows 7

Pro for Embedded Systems, and Windows Embedded Standard 7– WS7P. For easy,

quick and cost effective network installations both models support PoE. These models

sealed with front IP 65 dust and water proof, and IP22 on the back side. Optional HF

RFID 13.56 MHz is especially useful in access control applications.

S-Series HMI support an exceptional feature - LED light bar. With the help of red, green,

blue and orange LED indicators you can see the status of the machine or processes afar.

It significantly reduces power consumption by keeping the display turned off.

1.1 Product Features

Winmate® 10.1” S-Series HMI with Intel ® Celeron ® Bay Trail-M N2930 processor

features:

 10.1” 1280 x 800 Resolution with P-Cap multi-touch screen

 Fanless cooling system and ultra-low power consumption

 PoE standard IEEE 802.3at (25 W)

 Dual Gigabit Ethernet

 Front IP65 water and dust proof

 Red/Green/Blue/Orange LED light bar indicators on both sides

 Optional HF RFID Reader 13.56 MHz

 Room booking schedule, access control, room information display

User Manual Chapter 1 Introduction

10.1” S-Series HMI

2

1.2 Hardware Specifications

HMI Device:

Model Name

W10IB3S-PCH2AC-PoE/ W10IB3S-PCH2-PoE

Display

Specifications

Size

10.1" TFT (widescreen)

Resolution

1280 x 800

Brightness (



)

300 cd/m (typ.)

Contrast Ratio

800:1 (typ.)

Viewing Angle

-89~89 (H); -89~89 (V)

Max Colors

262K (6bit)

Touch

Projective-capacitive touch

System

Specification

CPU

Intel ® Celeron ® Bay Trail-M N2930

1.83GHz

System Chipset

Intel® ATOM SoC Integrated

Memory

2GB DDR3L 1066/1333 SO-DIMM (optional

4GB)

Storage

64GB mSATA SSD

Ethernet

Dual Intel® WG82574L GbE LAN

OS

Windows 10 IoT Enterprise

Windows Embedded 8.1 Industry Pro

Windows Embedded 8 Standard

Windows Embedded 7 Standard

Security Support

Trusted Platform Module (TPM 1.2)

I/O Connectors

Serial Port

1 x RS-232/422/485

USB Port

1 x USB 3.0, 1 x USB 2.0

Ethernet Port

2 x RJ 45-10/100/1000 Mbps

HDMI

1 x HDMI

Speaker

1 x 1 watt speaker

Digital I/O

(Optional)

4DID4O

User Manual Chapter 1 Introduction

10.1” S-Series HMI

3

Peripheral

(optional)

HF RFID

HF RFID 13.56MHz

Front Camera

2MP Front Camera (W10IB3S-PCH2AC-PoE)

LED Light Bar

RGB LED Light Bar (W10IB3S-PCH2AC-PoE)

Power

Management

Power Input

12V DC IN Terminal Block (Phoenix Type)

Power over

Ethernet

Support IEEE 802.3at (25W)

Mechanical

Specifications

Dimensions

(W x L x H)

263.28 x 171 x 35.7 mm

Mounting

VESA mount (75 x 75mm)

Cooling System

Fanless design

Environmental

Considerations

Operating Temp.

0 °C to +50 °C

Humidity

30% to 90% (non-condensing)

IP Rating

Front: IP65 water and dust proof

Rear: IP22

1.3 Software Support

Winmate provides the following drivers S-Series HMI.

Item

Driver

Windows 7

Windows 8

Windows 10

1

Chipset Driver

☑

2

Graphics Driver

☑

3

Audio Driver

☑

4

Intel Sideband Fabric Device

(Intel MBI) Driver

☒

☑

5

Intel Trusted Engine Interface

(Intel TXE) Driver

☑

6

USB 3.0 Driver

☑

☒

7

Watchdog Driver

☑

User Manual Chapter 1 Introduction

10.1” S-Series HMI

4

Winmate provides the following Software Development Kits (SDK) for S-Series HMI.

Item

File Type

Description

1

Watchdog SDK & AP

Watchdog SDK and AP

2

Digital I/O SDK

3

LED Porting Guide

LED Light Bar

4

RFID Porting Guide

1.4 Packing List

Carefully remove the box and unpack your HMI device. Please check if all the items listed

below are inside your package. If any of these items are missing or damaged contact us

immediately.

1.4.1 Standard Accessories

Standard factory shipment list:

10.1” HMI

Device

Power Cord

AC Adapter

(12V/ 50W)

Terminal Block

3 pin

External USB

cable

Driver CD &

User Manual

VESA Mounting

Screws

User Manual Chapter 1 Introduction

10.1” S-Series HMI

5

1.4.2 Optional Accessories

Package may include optional accessories based on your order.

VESA Desk Stand

Dimensions

Model Name: PCVS-V1

Part Number: 99KK00A0000E

User Manual Chapter 1 Introduction

10.1” S-Series HMI

6

Front Side In-Wall Mount

Model Name: PCFW-V1

Part Number: 99KK00A0000C

Dimensions

Page is loading ...

Winmate W10IB3S-PCH2-PoE S-Series User manual

This manual is also suitable for

Winmate W10IB3S-PCH2-PoE S-Series User manual

Related papers

Other documents