LevelOne 552030 Datasheet

LevelOne
Brand
LevelOne
Model
552030
Category
PoE adapters
Type
Datasheet

This manual is also suitable for

LevelOne 552030 is a versatile and feature-rich device that provides a comprehensive range of connectivity options and advanced networking capabilities. With its ability to function as a PoE injector, extender, and splitter, it offers flexible power and data distribution solutions for various network applications.

As a PoE injector, the device can add PoE functionality to non-PoE switches or routers, enabling them to power devices such as IP cameras, VoIP phones, and wireless access points over Ethernet cables. This eliminates the need for separate power supplies, simplifying installation and reducing cable clutter.

LevelOne 552030 is a versatile and feature-rich device that provides a comprehensive range of connectivity options and advanced networking capabilities. With its ability to function as a PoE injector, extender, and splitter, it offers flexible power and data distribution solutions for various network applications.

As a PoE injector, the device can add PoE functionality to non-PoE switches or routers, enabling them to power devices such as IP cameras, VoIP phones, and wireless access points over Ethernet cables. This eliminates the need for separate power supplies, simplifying installation and reducing cable clutter.

2
PoE Power
Measurement
PPM-1000
PPM-1000 is a convenient and compact sized test and
measurement device for PoE network installations. It
veries whether there is sucient power to ensure
your PoE device can function correctly, and helps
avoid costly downtime or damage to equipment.
This is particularly important when using non-PoE
standard Power Sourcing Equipments (PSE) such as
some High Power injectors.
The uncertainty in the power available is due to a
range of variable factors such as the length of the
cable, the pin location in the RJ-45 connector and
the quality of the network cable can all aect the real
power available.
Testing is simply done by connecting the network
wires to the PPM-1000 before clamping the RJ45
connector. The LED display and indicators will
instantly reveal results. Powered by a replaceable and
rechargeable battery, PPM-1000 is a portable device
that brings enhanced convenience to the installer, and
helps eliminates problems in the future.
Key Features
- Ensure your PoE device works correctly
- Measure available power (watt) and voltage in a PoE
line
- Portable and compact size
- LED display and indicators to reveal the power status
- Built-in temperature sensor
- Replaceable external battery pack for true portability
- Detachable neck strap
- Build-in temperature sensor and LED indicator to
inform user overheat condition if high power load
test is applied
Related Products
1
H/W Version: 1
POI-4000
High Power Injector
POC-4000
8-Bay High Power PoE Chassis
2 43
9 10 11
5 6 7 8
1. External Battery Pack
2. USB Power Port
3. Battery Power Switch
4. USB Port (Charge Battery)
5. Display/Set(+) Button
6. Console Port(for upgrade)
7. Network UTP Port
8. Start/Set(-) Button
9. LED Indicators
10. LED Digits Display
11. Power Probing Terminal
www.level1.com
I
one world_one brand_one level_
PoE PD/PSE/Repeaters
3
All mentioned brand names are registered trademarks and property of their owners. Technical specications are subject to change without notice.
© Copyright Digital Data Communications GmbH. All Rights Reserved.
Interface
Top Side: 4 x Push Terminals connectors to x bare wire
Front Side: 1 x Network UTP port to measure power status
LED indicators:
Status or result is shown by the LED indicators below with
dierent colors
PWR / SYS: Power status / Test and system status
PASS / FAIL: Test result of each test
WATT / VOL: States of measured power consumption (watt) or
voltage. Please watch the reading of measured temperature by
reading in LED display or the device is overheated.
Temp / Over Temp: State of measured temperature by reading
in LED display or the device is overheated
LED Display Panel:
3 digits LED display: Show the measured voltage, watt or
temperature inside the device.
Operation Buttons:
Start / Stop: Start / Stop to measure maximum available power
(watt) and Voltage
Function mode: Switch around dierent power unit and its
state is presented by LED indicator
Voltage LED state: Current unit is Voltage; watch the voltage
reading on LED display panel
Watt LED state: Current unit is Watt, watch the watt reading on
LED display panel
Temperature LED state: Current unit is temperature, watch the
temperature reading on LED display panel
External Battery Pack:
Able to mount external battery pack to PPM-1000 for on-site
test without power supply
USB port of both PPM-1000 and battery pack are all for power
supply or charge purpose without data link to PC
Humidity:
Operating: 0%~85%RH
Storage: 0%~85%RH
Dimensions:
95 mm x 76.6mm x 19.6 mm
Technical Specications
Product Diagram
Order Information
PPM-1000:
PoE Power Measurement
Package Contents
PPM-1000 x1
Min USB Adapter x1
External Li-ON Battery x1
Universal Travel adapter x1
Console cable x1
Neck Strap x 1
User Manual x1
PPM-1000
PoE Ethernet Switch
V1.0
IP Phone
IP Camera
Public Wireless AP
  • Page 1 1
  • Page 2 2

LevelOne 552030 Datasheet

LevelOne
Brand
LevelOne
Model
552030
Category
PoE adapters
Type
Datasheet
This manual is also suitable for

LevelOne 552030 is a versatile and feature-rich device that provides a comprehensive range of connectivity options and advanced networking capabilities. With its ability to function as a PoE injector, extender, and splitter, it offers flexible power and data distribution solutions for various network applications.

As a PoE injector, the device can add PoE functionality to non-PoE switches or routers, enabling them to power devices such as IP cameras, VoIP phones, and wireless access points over Ethernet cables. This eliminates the need for separate power supplies, simplifying installation and reducing cable clutter.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents