The Edit window allows the
Name, IP address, Subnet,
and Gateway of the camera to be
changed. It also allows the cam-
era to be configured for DHCP.
Click the “Apply” button after
making the desired changes.
Note: Changing between a
static IP address and DHCP
will require the camera to
be rebooted.
To view a camera “Double click” on a camera entry in
the list or click the “Open” button. The “Live” page will
be displayed.
Note: It’s also possible to
open Internet Explorer,
and enter the IP address
of the IQeye device in
the address field of the
browser.
5.