Panasonic DMPBD84GN Operating instructions

Category
Blu-Ray players
Type
Operating instructions
Operating Instructions
Blu-ray Disc
TM
Player
Model No. DMP-BDT280
DMP-BDT180
DMP-BDT167
DMP-BD84
Thank you for purchasing this product.
Please read these instructions carefully before using this product, and save this manual for future use.
Model number suffix “EB”, “B” denotes UK model.
Unless otherwise indicated, illustrations in these operating instructions are of DMP-BDT280.
Firmware updates
Panasonic is constantly improving the unit’s firmware to ensure
that our customers are enjoying the latest technology.
Panasonic recommends updating your firmware as soon as you
are notified.
For details, refer to “Firmware updates” (> 15) or
http://panasonic.jp/support/global/cs/ (This site is in English only.)
EB
SQW0628-2
until
2014/4/14
B
GN GA
GH
DMP-BDT280&180_EBGNGAGH-SQW0349.book 1 ページ 2020年4月13日 月曜日 午後4時23分
- 2 -
Unit
To reduce the risk of fire, electric shock or product damage,
Do not expose this unit to rain, moisture, dripping or splashing.
Do not place objects filled with liquids, such as vases, on this
unit.
Use only the recommended accessories.
Do not remove covers.
Do not repair this unit by yourself. Refer servicing to qualified
service personnel.
Do not let metal objects fall inside this unit.
Do not place heavy items on this unit.
AC mains lead
To reduce the risk of fire, electric shock or product damage,
Ensure that the power supply voltage corresponds to the
voltage printed on this unit.
Insert the mains plug fully into the socket outlet.
Do not pull, bend, or place heavy items on the lead.
Do not handle the plug with wet hands.
Hold onto the mains plug body when disconnecting the plug.
Do not use a damaged mains plug or socket outlet.
The mains plug is the disconnecting device.
Install this unit so that the mains plug can be unplugged from the
socket outlet immediately.
Unit
This unit utilizes a laser. Use of controls or adjustments or
performance of procedures other than those specified herein
may result in hazardous radiation exposure.
Do not place sources of naked flames, such as lighted candles,
on this unit.
This unit may receive radio interference caused by mobile
telephones during use. If such interference occurs, please
increase separation between this unit and the mobile telephone.
[For _the_ U ni ted_K ingdo m,_Irel a nd,_H ongK ong,_A ustrali a _ a nd_Ne w_Zea l a nd]
This unit is intended for use in moderate climates.
[For_the_So ut h_E ast _Asia]
This unit is intended for use in tropical climates.
Placement
Place this unit on an even surface.
To reduce the risk of fire, electric shock or product damage,
Do not install or place this unit in a bookcase, built-in cabinet or
in another confined space. Ensure this unit is well ventilated.
Do not obstruct this unit’s ventilation openings with newspapers,
tablecloths, curtains, and similar items.
Do not place the unit on amplifiers/receivers or equipment that
may become hot. The heat can damage the unit.
Do not expose this unit to direct sunlight, high temperatures,
high humidity, and excessive vibration.
Batteries
Mishandling of batteries can cause electrolyte leakage and may
cause a fire.
Danger of explosion if battery is incorrectly replaced. Replace
only with the type recommended by the manufacturer.
When disposing of the batteries, please contact your local
authorities or dealer and ask for the correct method of disposal.
Do not mix old and new batteries or different types at the same
time.
Do not heat or expose to flame.
Do not leave the battery(ies) in a car exposed to direct sunlight
for a long period of time with doors and windows closed.
Do not take apart or short circuit.
Do not recharge alkaline or manganese batteries.
Do not use batteries if the covering has been peeled off.
Remove batteries if you do not intend to use the remote control for
a long period of time. Store in a cool, dark place.
[BDT167] [BD84]
AC adaptor
The AC adaptor operates on AC between 110 V and 240 V.
But obtain a suitable plug adaptor if the plug does not fit the AC
mains socket.
Precautions
WARNING
CAUTION
Caution for AC Mains Lead
(For the AC mains plug of three pins)
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains plug for
your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the
replacement fuse has a rating of 5-ampere and that it is approved
by ASTA or BSI to BS1362.
Check for the ASTA mark Ï or the BSI mark Ì on the body of the
fuse.
If the plug contains a removable fuse cover you must ensure that it
is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a
replacement cover is obtained.
A replacement fuse cover can be purchased from your local
dealer.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC mains
plug (figures A and B). Confirm the AC mains plug fitted and follow
the instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
2. Replace the fuse and close or attach the fuse cover.
Fuse cover
Figure A Figure B
Figure A Figure B
Fuse
(5 ampere)
Fuse
(5 ampere)
DMP-BDT280&180_EBGNGAGH-SQW0349.book 2 ページ 2020年4月13日 月曜日 午後4時23分
- 3 -
This unit adopts the following technology for copyright protection.
Cinavia Notice
This product uses Cinavia technology to limit the use of
unauthorized copies of some commercially-produced film and
videos and their soundtracks. When a prohibited use of an
unauthorized copy is detected, a message will be displayed and
playback or copying will be interrupted.
More information about Cinavia technology is provided at the
Cinavia Online Consumer Information Center at
http://www.cinavia.com. To request additional information about
Cinavia by mail, send a postcard with your mailing address to:
Cinavia Consumer Information Center, P.O. Box 86851, San
Diego, CA, 92138, USA.
The operation history may be recorded in the memory of this
unit.
Disposal of Old Equipment and Batteries
Only for European Union and countries with
recycling systems
These symbols on the products, packaging, and/or
accompanying documents mean that used electrical
and electronic products and batteries must not be
mixed with general household waste.
For proper treatment, recovery and recycling of old
products and used batteries, please take them to
applicable collection points in accordance with your
national legislation.
By disposing of them correctly, you will help to save
valuable resources and prevent any potential negative
effects on human health and the environment.
For more information about collection and recycling,
please contact your local municipality.
Penalties may be applicable for incorrect disposal of
this waste, in accordance with national legislation.
Note for the battery symbol (bottom
symbol):
This symbol might be used in combination with a
chemical symbol. In this case it complies with the
requirement set by the Directive for the chemical
involved.
Restriction on use of
unauthorized copied content
[BDT280]
Wireless LAN connection
The following limits are in place regarding the usage of this unit.
You must be aware of these limits before using this unit.
Panasonic will in no way be responsible for any incidental damage
which may arise due to a failure to obey these limits, or to any
condition of use or disuse of this unit.
Data transmitted and received over radio waves may be
intercepted and monitored.
This unit contains delicate electronic components.
Please use this unit in the manner in which it was intended and
follow the following points:
Do not expose this unit to high temperatures or direct
sunlight.
Do not bend, or subject this unit to strong impacts.
Keep this unit away from moisture.
Do not disassemble or alter this unit in any way.
[For_t he_Uni t e d_Ki ngdom_and_Ireland]
Declaration of Conformity (DoC)
Hereby, “Panasonic Corporation” declares that this product is in
compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
Customers can download a copy of the original DoC to our
R&TTE products from our DoC server:
http://www.doc.panasonic.de
Contact to Authorised Representative:
Panasonic Marketing Europe GmbH, Panasonic Testing Centre,
Winsbergring 15, 22525 Hamburg, Germany
This product is in compliance with the radio standards of the
following countries.
Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark,
Finland, France, Germany, Greece, Hungary, Ireland, Italy,
Iceland, Liechtenstein, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, United Kingdom, Switzerland
This product on purpose to connect to access point of 2.4 GHz
WLAN.
To dispose or transfer this
unit
The unit may keep the user settings information in the unit. If you
discard this unit either by disposal or transfer, then follow the
procedure to return all the settings to the factory presets to delete
the user settings. (> 30, “To return all settings to the factory
preset.”)
DMP-BDT280&180_EBGNGAGH-SQW0349.book 3 ページ 2020年4月13日 月曜日 午後4時23分
- 4 -
Table of contents
Precautions . . . . . . . . . . . . . . . . . 2
Getting started
Accessories . . . . . . . . . . . . . . . . . 5
Unit and media care . . . . . . . . . . . 6
Playable media. . . . . . . . . . . . . . . 7
Control reference guide . . . . . . . . 9
Connections and settings
Connecting to a TV . . . . . . . . . . 11
Connecting to an amplifier/
receiver. . . . . . . . . . . . . . . . . . . 12
Connecting to the network . . . . . 13
Settings . . . . . . . . . . . . . . . . . . . 14
Playback
Inserting or removing media . . . . 15
HOME menu . . . . . . . . . . . . . . . . 16
Playback . . . . . . . . . . . . . . . . . . . 17
Enjoying Network Service . . . . . . 19
Home Network feature . . . . . . . . 20
“HDMI CEC” . . . . . . . . . . . . . . . . 22
USB Sharing . . . . . . . . . . . . . . . . 22
Settings
Option menu . . . . . . . . . . . . . . . . 23
Setup menu. . . . . . . . . . . . . . . . . 24
Reference
Troubleshooting guide . . . . . . . . 30
Specifications . . . . . . . . . . . . . . . 34
DMP-BDT280&180_EBGNGAGH-SQW0349.book 4 ページ 2020年4月13日 月曜日 午後4時23分
Getting started
- 5 -
Getting started
Accessories
Check the supplied accessories before using this
unit.
1 Remote control
[BDT280]
[For_the_ Unit ed_Kingdom_an d_Ireland]
(N2QAYB001031)
[For_Austr alia_ and_New_Zealand]
(N2QAYB000962)
[BDT180]
[For_the_ Unit ed_Kingdom_an d_Ireland]
[For_Austr alia_ and_New_Zealand]
(N2QAYB001030)
[For_the_ Sou th _East_Asia_and_HongKong]
(N2QAYB001033)
[BDT167] [BD84]
[For_the_ Unit ed_Kingdom_an d_Ireland]
[For_Austr alia_ and_New_Zealand]
(N2QAYB001029)
[For_the_ Sou th _East_Asia_and_HongKong]
(N2QAYB000958)
2 Batteries for remote control
[BDT280] [BDT180]
AC mains lead
[For_the_ Unit ed_Kingdom_an d_Ireland]
(K2CT2CA00007)
[For_Austr alia_ and_New_Zealand]
(K2CJ2DA00014)
[For_the_ Sou th _East_Asia_and_HongKong]
*
[BDT167] [BD84]
1 AC adaptor
[For_the_ Unit ed_Kingdom_an d_Ireland,_and _HongKong]
(SAE0003)
[For_Austr alia_ and_New_Zealand]
(SAE0004)
[For_the_ Sou th _East_Asia]
(SAE0002)
[Except_th e_Uni ted _Kingdom_and_I reland]
1 HDMI Cable
Product numbers are provided in these operating
instructions correct as of December 2015. These may be
subject to change.
Do not use AC mains lead and AC adaptor
with other
equipment.
Do not use any other AC mains lead and AC adaptors
except the supplied one.
* See page 11 for more information.
Using the remote control
Insert the batteries to the terminal so that it (i
and j) matches those in the remote control.
Point it at the remote control signal sensor on this
unit. (> 9)
R6/LR6, AA
(Alkaline or manganese batteries)
DMP-BDT280&180_EBGNGAGH-SQW0349.book 5 ページ 2020年4月13日 月曜日 午後4時23分
Getting started
- 6 -
Unit and media care
Clean this unit with a soft, dry
cloth
Never use alcohol, paint thinner or benzine to
clean this unit.
Before using chemically treated cloth, carefully
read the instructions that came with the cloth.
This unit’s lens
Use the lens cleaner (not supplied) to clean the
unit’s lens.
Clean discs
Wipe with a damp cloth and then wipe dry with a
dry cloth.
Handle discs by the edges to avoid inadvertent
scratches or fingerprints on the disc.
Do not attach labels or stickers to discs.
Do not use disc cleaning sprays, benzine,
thinner, static electricity prevention liquids or
any other solvent.
Do not use the following discs:
Discs with exposed adhesive from removed
stickers or labels (rented discs, etc.).
Discs that are badly warped or cracked.
Irregularly shaped discs, such as heart
shapes.
Disc handling precautions
DO
DO NOT
DMP-BDT280&180_EBGNGAGH-SQW0349.book 6 ページ 2020年4月13日 月曜日 午後4時23分
Getting started
- 7 -
Playable media
* [BDT280] [BDT180] [BDT167] only
See pages 8 and 34 for more information on the types of content that can be played.
Device Media markings Device types Contents format
BD-Video Video
BD-RE
Video,
JPEG, MPO*,
AAC, ALAC, DSD,
FLAC, MP3, WAV,
WMA
BD-R
Video, MKV, Xvid,
AAC, ALAC, DSD,
FLAC, MP3, WAV,
WMA
DVD-Video Video
DVD-R
Video, AVCHD, MKV,
Xvid,
JPEG, MPO*,
AAC, ALAC, DSD,
FLAC, MP3, WAV,
WMA
DVD-R DL
DVD-RW
Video, AVCHD
+R/+RW/+R DL
Music CD Music [CD-DA]
CD-R
CD-RW
MKV, Xvid,
JPEG, MPO*,
AAC, ALAC, FLAC,
MP3, Music [CD-DA],
WAV, WMA
USB devices
(up to 4 TB)
MKV, MP4, MPEG2,
Xvid,
JPEG, MPO*,
AAC, ALAC, DSD,
FLAC, MP3, WAV,
WMA
BD
DVD
CD
USB
DMP-BDT280&180_EBGNGAGH-SQW0349.book 7 ページ 2020年4月13日 月曜日 午後4時23分
Getting started
- 8 -
Types of discs that cannot be
played by this unit
Any other disc that is not specifically
supported or previously described.
Region management information
The unit can play back BD-Video/DVD-Video
discs of the following regions codes, including
ALL”:
Example: BD-Video DVD-Video
[For_the _Uni ted _Kingdom_and_Ireland]
[For_Aust rali a _and _New_Zealand]
[For_the _So ut h_E ast _Asia_and_HongKon g]
Finalize
Any DVD-R/RW/R DL, +R/+RW/+R DL and
CD-R/RW that are recorded by a recorder need to
be finalized by the recorder to play on this unit.
Please refer to the recorder’s instructions.
BD-Video
This unit supports high bit rate audio (Dolby
®
Digital Plus, Dolby
®
TrueHD, DTS-HD High
Resolution Audio
TM
and DTS-HD Master
Audio
TM
) adopted in BD-Video.
[BDT280] [BDT180] [BDT167]
Music CD
Operation and sound quality of CDs that do not
comply with CD-DA specifications (copy control
CDs, etc.) cannot be guaranteed to work.
USB device
This unit does not guarantee connection with all
USB devices.
This unit does not support USB device
charging.
FAT12, FAT16, FAT32, and NTFS file systems
are supported.
This unit supports USB2.0 High Speed.
This unit supports an HDD formatted in FAT32
and NTFS. If the HDD is not recognized, the
power to the HDD may not be supplied. Supply
power from an external source.
BD-RE, BD-R
Discs recorded in DR mode using Panasonic
Blu-ray Disc recorders may not play back the
audio etc., correctly.
It may not be possible to play the above media in some
cases due to the type of media, the condition of the
recording, the recording method, and how the files were
created.
The producers of the disc can control how discs are
played, so you may not always be able to control play as
described in these operating instructions. Read the disc’s
instructions carefully.
DVD-RAM
Super Audio CD
Photo CD
DVD-Audio
Video CD and Super Video CD
HD DVD
If “Dolby D/Dolby D +/Dolby TrueHD” is set to
“PCM” and “DTS Neo:6” is set to “Off”, the
maximum possible number of Dolby
®
sound is
2ch PCM. (> 25, 26)
3D
3D videos and 3D still pictures can be played
back when this unit is connected to a 3D
compatible TV using a High Speed HDMI
Cable.
[BDT280] [BDT180] 2D video can be enjoyed as 3D
virtually. (> 24)
4
3
DMP-BDT280&180_EBGNGAGH-SQW0349.book 8 ページ 2020年4月13日 月曜日 午後4時23分
Getting started
- 9 -
Control reference guide
When other Panasonic devices respond to the remote control of the unit, change the remote control
code. (> 29)
e.g., [Fo r _the_United_Kingdom_and_Ireland]
[For_Aust rali a _and _New_Zealand]
e.g., [For_the_South_East_Asia_and_HongKong]
1
2
3
6
4
5
7
8
19
10
9
20
18
16
15
17
14
13
12
11
abc
jkl
mno
pqrs tuv
wxyz
ㄅㄆㄇ
ㄈㄉㄊ
[BDT180]
[BDT167]
[BD84]
abc
jkl
mno
pqrs tuv
wxyz
ㄅㄆㄇ
ㄈㄉㄊ
1
2
3
6
4
7
8
19
9
10
20
18
16
15
17
14
13
12
11
5
[BDT180]
[BD84]
21
21
22
22
23
23
24
24
282725 26
2825
[BDT280]
[BDT180]
[BDT167] [BD84]
DMP-BDT280&180_EBGNGAGH-SQW0349.book 9 ページ 2020年4月13日 月曜日 午後4時23分
Getting started
- 10 -
1 Turn the unit on and off
2 TV operation buttons
You can operate the Panasonic TV using this
unit’s remote control. Some buttons may not
work depending on the TV.
[Í TV] : Turn the TV on and off
[AV] : Change input
[ijVOL] : Adjust the volume
3 Select title numbers, etc./Enter numbers or
[BDT280] [BDT180] characters
4 Cancel
5 Change soundtrack (> 17)
6 Basic playback control buttons (> 17)
7
[For_the_ Unit ed_Kingdom_an d_Ireland]
[For_Austr alia_and_New_Zealand]
Show Pop-up menu (> 17)
[For_the_So ut h_E ast_ Asia_and_HongKon g]
Show USB Sharing menu (> 22)
8 Show Top menu (> 17)
9 Show Option menu (> 23)
10 Coloured buttons (red, green, yellow, blue)
Used for various purposes depending on the
display
11 Transmit the remote control signal
12 Open or close the disc tray (> 15)
13 Show the status messages (> 18)
14
[BDT280]
Show Miracast
TM
screen (> 20)
[BDT180] [BDT167] [BD84]
Switch Secondary Video on/off
(Picture-in-picture) (> 23)
15 Show the Home Screen of the Network
Service (> 19)
16 Exit the Menu screen
17
[For_the_ Unit ed_Kingdom_an d_Ireland]
[For_Austr alia_and_New_Zealand]
Show Netflix screen (> 19)
[For_the_So ut h_E ast_ Asia_and_HongKon g]
Show Pop-up menu (> 17)
18 Show HOME menu (> 16)
19 [3, 4, 2, 1] : Move the highlight for
selection
[OK] : Confirm the selection
(;1) : Frame-by-frame (> 17)
20 Return to previous screen
21 Disc tray (> 15)
22 USB port (> 15)
23 POWER LED
The LED lights when the unit is turned on,
and flashes when error occurs.
24 Remote control signal sensor
Distance: Within approx. 7 m
Angle: Approx. 20e up and down, 30e left and
right
25 Open or close the disc tray (> 15)
26
[BDT280] [BDT180]
Stop (> 17)
27
[BDT280] [BDT180]
Start play (> 17)
28 Standby/on switch (Í/I) (> 14)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
Rear panel terminals (> 11–13)
Available keys for HDMI CEC (> 22)
3 Number keys
6 Basic playback control buttons
9 Option button
10 Coloured buttons (red, green, yellow, blue)
16 Exit button
19 [3, 4, 2, 1]/[OK] button
20 Return button
DMP-BDT280&180_EBGNGAGH-SQW0349.book 10 ページ 2020年4月13日 月曜日 午後4時23分
- 11 -
Connections and settings
Connections and settings
Connecting to a TV
Connect the AC mains lead after making all connections.
Before making any connections, we recommend that you temporarily disconnect all the units from AC
power.
Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p or
[BDT280] [BDT180]
24p (4K) signal, please use HDMI cables 5.0 meters or less.
[Except_the_United_Kingdom_and_Ireland ] The HDMI-compliant cable is supplied with this unit.
This unit consumes a small amount of AC power (> 34) even when turned off in standby mode. For
the purpose of energy conservation, the unit should be disconnected if you will not be using it for
extended period of time.
[BDT167] [BD84] The unit is in the standby condition when the AC adaptor is connected. The primary
circuit is always “live” as long as the AC adaptor is connected to an electrical outlet.
HDMI IN
[BDT280]
[BDT180]
[BDT167]
[BD84]
AC mains lead (supplied)
HDMI cable
([Except_the_United_Kingdom_and_Ireland] supplied)
[BDT167]
[BD84]
[BDT280]
[BDT180]
AC adaptor (supplied)
To a household mains socket
[BDT180]
[For_t he_So uth _ East_ A sia_an d_H ong Ko ng ]
2 AC mains leads are supplied.
Use the AC mains lead that matches the socket for the area you live in.
Thailand: With a label
DMP-BDT280&180_EBGNGAGH-SQW0349.book 11 ページ 2020年4月13日 月曜日 午後4時23分
- 12 -
Connections and settings
Connecting to an amplifier/receiver
Set “Digital Audio Output” (> 25).
[BDT280] [BDT180] [BDT167] When connecting to a non-3D or [BDT280] [BDT180] 4K compatible amplifier/receiver,
connect this unit to a TV, then connect the TV and the amplifier/receiver. Please note, however, that
the audio can only be up to 5.1ch.
When using the TV or amplifier/receiver that does not have the indication of “(ARC)”
(non-ARC-compatible) on the HDMI terminal, the amplifier/receiver and TV must also be connected
using an optical digital cable in order to enjoy the TV’s sound through the amplifier/receiver.
HDMI IN
(ARC)
HDMI OUT
(ARC)
HDMI IN
HDMI cable
Amplifier/receiver
[BDT280]
[BDT180]
[BDT167]
[BD84]
HDMI cable
([Except_the_United_Kingdom_ a nd_ Ireland] supplied)
[BDT280]
[BDT180]
[BDT167]
[BD84]
DMP-BDT280&180_EBGNGAGH-SQW0349.book 12 ページ 2020年4月13日 月曜日 午後4時23分
- 13 -
Connections and settings
Connecting to the network
The following services can be used when this unit is connected to broadband.
Firmware can be updated (> 15)
You can enjoy BD-Live (> 18)
You can enjoy Network Service (> 19)
[BDT280] [BDT180] You can access other devices (Home Network) (> 20)
For details about connection method, refer to the instructions supplied with the connected equipment.
For up-to-date compatibility information on your wireless router, refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.
Inserting any cable other than a LAN cable in the LAN port can damage the unit.
[BDT280] This unit supports Wi-Fi Direct
®
and can make a wireless connection to wireless devices
without router. You can use this function when enjoying Home Network feature, etc. Internet access
is not available while connected via Wi-Fi Direct
®
. (> 20, 27)
[BDT280]
Wireless LAN connection
This unit has built-in Wi-Fi
®
and can be connected to a wireless router.
Wireless router, etc.
Internet
The unit is not compatible with public wireless LAN services (Hotspot etc.) provided in airports,
stations, cafes, etc.
See page 3 for the precautions for wireless LAN connection.
LAN cable connection
Internet
LAN Cable
Broadband router, etc.
[BDT167]
[BD84]
[BDT280]
[BDT180]
DMP-BDT280&180_EBGNGAGH-SQW0349.book 13 ページ 2020年4月13日 月曜日 午後4時23分
- 14 -
Connections and settings
Settings
The following settings can be performed anytime
in the Setup menu. (> 27, 28)
After connecting your new player for the first time
and pressing [Í], the basic settings screen will
appear.
Preparation
Turn on the TV and select the appropriate
video input.
1 Press [Í].
Setup screen appears.
2 Follow the on-screen instructions to
continue with the settings.
After completing “Easy Settings”, you can perform
“Easy Network Setting”.
Follow the on-screen instructions to establish
your connection settings.
e.g., [BDT280]
Select “Wired” or “Wireless” and press [OK].
[BDT280]
About the wireless connection
Before beginning wireless connection setup
Obtain your network name (SSID*).
If your wireless connection is encrypted, please
be sure that you know your encryption key.
If your SSID is not displayed;
Search again by pressing the red button on the
remote control.
Stealth SSIDs will not be displayed; in this case,
enter manually by using “Manual setting”.
Press [HOME]
> press [OK] to select “Setup”
> select “Player Settings”
> select “Network” and press [OK]
> select “Network Settings” and press [OK]
> select “Wireless Settings” and press [OK]
> select “Connection Setting” and press [OK]
> select “Manual setting” and press [OK]
If your wireless network is encrypted;
Encryption Key input screen will be displayed.
Input the encryption key of your network.
An USB keyboard can be used, but only for the
keys displayed on the screen.
If your wireless router is supports WPS (Wi-Fi
Protected Setup
TM
);
You can easily set up a connection by pressing
the green button on the remote control.
Refer to the operating instructions of the hub or router.
[BDT280]
Do not use this unit to connect to any wireless
network for which you do not have usage rights.
Using these networks may be regarded as illegal
access.
If you have trouble getting online on your PC after
performing network settings on this unit, perform the
network settings on your PC.
[BDT280]
Please be aware that connecting to a network
without encryption may result in the leaking of data such as
personal or secret information.
* SSID:
An SSID (Service Set IDentification) is a name used by
wireless LAN to identify a particular network. Transmission
is possible if the SSID matches for both devices.
Easy Settings
Easy Network Setting
Easy Network Setting
Wired
Wireless
Select a connection mode.
OK
RETURN
DMP-BDT280&180_EBGNGAGH-SQW0349.book 14 ページ 2020年4月13日 月曜日 午後4時23分
- 15 -
Playback
Occasionally, Panasonic may release updated
firmware for this unit that may add or improve the
way a feature operates. These updates are
available free of charge.
This unit is capable of checking the firmware
automatically when connected to the Internet via
a broadband connection.*
When a new firmware version is available, the
following message is displayed.
You can also download the latest firmware from
the following website and store it to a USB device
to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
DO NOT DISCONNECT the unit from the AC
power or perform any operation while the update
takes place.
To show the firmware version on this unit. (> 29,
“Firmware Version Information”)
Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
If you do not want to check for the latest firmware version,
set “Automatic Update Check” to “Off”. (> 29)
* You must agree to the terms of use for the Internet function
and the privacy policy. ([BDT280] [BDT180] > 16, “Notice”,
[BDT167] [BD84] > 28, “Notice”)
Playback
Inserting or removing
media
Notes
When inserting a media item, ensure that it is
facing the correct way, which is the right side
facing up.
If you connect a Panasonic product with a USB
connection cable, the setup screen may be
displayed on the connected equipment. For
details, refer to the instructions for the
connected equipment.
CAUTION
Do not place objects in front of the unit. The disc
tray may collide with objects when it is opened,
and this may cause malfunction.
Firmware updates
After the firmware is installed, unit will restart and
the following screen will be displayed.
e.g.,
Firmware Update
Current Version: X.XX
New Version: X.XX
Do you want to start firmware update?
For the update information, please visit the
following website:
http://panasonic.jp/support/global/cs/
Yes No
OK
RETURN
The firmware has been updated.
Current Version
:
x.xx
RETURN
DMP-BDT280&180_EBGNGAGH-SQW0349.book 15 ページ 2020年4月13日 月曜日 午後4時23分
- 16 -
Playback
HOME menu
Major functions of this unit can be operated from
the HOME menu.
Preparation
Turn on the TV and select the appropriate video
input.
1 Press [Í] to turn on the unit.
2 Press [OK] or [3, 4, 2, 1] to select the
item.
If there are any other items, repeat this
step.
[BDT280] [BDT180]
[BDT167] [BD84]
Network Service
Displays the Home Screen of Network Service.
(> 19)
[BDT280] [BDT180]
Notice
Displays the terms of service for the cloud
services.
To show the HOME menu
Press [HOME].
Items to be displayed may vary with the media.
After network service introduction banner is
shown, the HOME menu is displayed.
When connected to the network, the
banner content may be changed.
You can disable the “Start-up Banner”
(> 29).
Videos
MusicPhotos Setup
Network
HOME
Blu-ray Disc Player
Setup
Notice
Videos/Photos/Music
Disc
Play back the contents.
(> 17)
When multiple contents
are recorded, select the
types of contents or the
title.
USB
[BDT280] [BDT180]
Network
Network Service
Displays the Home
Screen of Network
Service. (> 19)
Home Network
DLNA Client (> 20)
[BDT280] Miracast (> 20)
Media Renderer (> 21)
Setup
Player Settings
(> 24)
USB Management
(> 18)
[For_the_S out h_East_Asia]
[For_t he_Hon gKong]
USB Sharing
(> 22)
Wallpaper
Changes the background
of HOME menu.
DMP-BDT280&180_EBGNGAGH-SQW0349.book 16 ページ 2020年4月13日 月曜日 午後4時23分
- 17 -
Playback
Playback
1 Insert the media.
Playback starts depending on the media.
2 Select the item to play and press [OK].
Repeat this step if necessary.
DISCS CONTINUE TO ROTATE WHILE MENUS ARE
DISPLAYED. Press [STOP] when you have finished
playback to protect the unit’s motor, your TV screen and so
on.
[BDT280] [BDT180] When the following conditions are met, a
still picture will be played back in 4K. The resolution of the
still picture will be changed automatically.
The unit is connected to a 4K compatible TV
“HDMI Video Format” is set to “Automatic” (> 25)
The still picture is being played back in 2D
It is not possible to play back AVCHD and MPEG2 videos
which have been dragged and dropped or copied and
pasted to the media.
The following functions may not work depending
on the media and contents.
Press [STOP].
The stopping point is memorized.
Resume play function
Press [1PLAY] to restart from this point.
The point is cleared if the media is removed.
On BD-Video discs including BD-J, the
resume play function does not work.
Press [;PAUSE].
Press [;PAUSE] again or [1PLAY] to restart
play.
Search
While playing, press [SEARCH6] or
[SEARCH5].
Slow motion
While paused, press [SEARCH5].
Xvid, MKV, MP4 and MPEG2: Not effective.
The speed increases up to 5 steps.
Music, MP3, etc.: The speed is fixed to a single
step.
Press [1PLAY] to revert to normal playback
speed.
While playing or paused, press [:] or
[9].
Skip to the title, chapter or track.
While paused, press [1] (;1).
Press and hold to fast forward.
Press [1PLAY] to revert to normal playback
speed.
Xvid, MKV, MP4 and MPEG2: Not effective.
Press [AUDIO].
You can change the audio channel number or
soundtrack language, etc.
Select the item and press [OK].
Operations during playback
Stop
Pause
Search/Slow motion
Skip
Frame-by-frame
Changing soundtrack
Show top menu/pop-up menu
Press [TOP MENU] or [POP-UP MENU].
DMP-BDT280&180_EBGNGAGH-SQW0349.book 17 ページ 2020年4月13日 月曜日 午後4時23分
- 18 -
Playback
While playing, press [STATUS].
The status messages give you information about
what is currently being played. Each time you
press [STATUS], the display information may
change or disappear from the screen.
Depending on media and contents, the display
may change or not appear.
e.g., BD-Video
A T: Title, C: Chapter, PL: Playlist
B Elapsed time in the title
C Current position
D Tota l ti me
e.g., JPEG
With “BD-Live” discs, you can enjoy bonus
contents that use Internet access.
For this BD-Live function, connection of a USB
device is necessary along with Internet
connection.
1 Perform network connection and settings.
(> 13, 14)
2 Connect a USB device with 1 GB or more
free space.
The USB device is used as the local
storage.
3 Insert the disc.
Deleting data on the USB device
Select “USB Managementin the HOME menu
(> 16), then select “BD-Video Data Erase” and
press [OK].
The usable functions and the operating method may vary
with each disc, please refer to the instructions on the disc
and/or visit their website.
“BD-Live Internet Access” may need to be changed for
certain discs (> 28).
Play a slideshow of photos and adjust various
settings during the playback.
1 Insert the media.
2 Select “Photos”.
3 Select an item and press the green button.
The following items can be set.
Still pictures displayed as “ ” cannot be played back
with this unit.
Show the status messages
[BDT280] [BDT180] [BDT167]
Enjoying 3D video and photos
Preparation
Connect this unit to a 3D compatible TV. (> 11)
Perform the necessary preparations for the TV.
Play back following the instructions displayed
on the screen.
3D Settings (> 24, 26)
Please refrain from viewing 3D images if you do not feel
well or are experiencing visual fatigue.
In the event that you experience dizziness, nausea, or
other discomfort while viewing 3D images, discontinue use
and rest your eyes.
3D video might not output the way it is set in “HDMI Video
Format” and [BDT280] [BDT180] “24p(4K)/24p Output”/
[BDT167] “24p Output” (> 25).
When playing back 3D photos from “Photos” screen, select
from the “3D” list. (Still pictures in “2D” are played back in
2D.)
If “2D” and “3D” indications are not displayed, press the
red button on the remote control to switch the view of
playback contents.
Play
BD-Video
T1 C1 0:05.14
0:20.52
A
C D
B
Date
Size
Manufacturer
Equipment
1 / 26
11.12.2007
500 X 375
Enjoying BD-Live
Slideshow
Start
Slideshow
Start the slideshow.
You can display still pictures in
the selected folder one by one
at a constant interval.
Interval Change the display interval.
Transition
Effect
Select the effect when sliding
pictures.
Repeat Play
Set whether to repeat the
slideshow.
DMP-BDT280&180_EBGNGAGH-SQW0349.book 18 ページ 2020年4月13日 月曜日 午後4時23分
- 19 -
Playback
Enjoying Network
Service
Network Service allows you to access some
specific websites supported by Panasonic.
[BDT167] [BD84] This unit has no full browser function
and some features of websites may not be
available.
* Images are for illustration purposes, contents may change
without notice.
Preparation
Network connection (> 13)
Network settings (> 14)
1 Press [INTERNET].
[For_the_ Unit ed_Kingdom_an d_Ireland]
[For_Austr alia_and_New_Zealand]
Netflix can be accessed directly by
pressing [NETFLIX] button even when this
unit is off.
2 Select the item and press [OK].
To exit from Network Service
Press [HOME].
*
MORE
BACK
XXXXXX
XXXXXXXXXXXXXXX
XXXXXXXXXXX
XXXXXXXX
XXXX
XXXX
XXXXXX, XXXX
XXXXXXXX
39°C
X
Market
XXXXXXXXXXXXXXXXXXXX
XXXXX
XXXXXX
XXXX
Network Service provides a variety of
selected Internet services such as the
following.
Online movie rental service
Video browsing service
Internet
[BDT280]
When playing content in the media, Network Service
cannot be accessed by pressing [INTERNET].
An USB keyboard can be used, but only for the keys
displayed on the screen. It may not be used depending on
the service.
In the following cases, settings are possible using the
Setup menu items.
When restricting the use of Network Service
(> 28, “Network Service Lock”)
When correcting the displayed time
(> 27, “Time Zone”, “Summer Time”)
When using another device such as a smartphone in
combination with the unit by using a certain app on the
device
(> 27, “Remote Device Operation”)
When using a slow Internet connection, the video may not
be displayed correctly. A high speed Internet service with a
speed of at least 6 Mbps is recommended.
Be sure to update the firmware as soon as a firmware
update notice is displayed on the screen. If the firmware is
not updated, you may not be able to use Network Service
function properly. (> 15)
Network Service Home Screen is subject to change
without notice.
The services through Network Service are operated by
their respective service providers, and service may be
discontinued either temporarily or permanently without
notice. Therefore, Panasonic will make no warranty for the
content or the continuity of the services.
Some features of websites or content of the service may
not be available.
Some content may be inappropriate for viewers.
Some content may only be available for specific countries
and may be presented in specific languages.
DMP-BDT280&180_EBGNGAGH-SQW0349.book 19 ページ 2020年4月13日 月曜日 午後4時23分
- 20 -
Playback
You can share photos, videos and music stored in
the DLNA Certified media server [PC with
Windows 7 installed, smartphone, recorders, etc.]
connected to your home network.
About support format of DLNA (> 35).
Preparation
1 Perform network connection (> 13) and
network settings (> 14) of this unit.
2 Add the contents and folder to the libraries of
the Windows Media
®
Player or the
smartphone, etc.
Playlist of Windows Media
®
Player can play
back only the contents that are stored in the
libraries.
When connected to Panasonic DLNA
compatible recorders, register this unit to your
Panasonic DLNA compatible recorders.
The list can be updated by pressing the red
button on the remote control.
5 Select the equipment and press [OK].
6 Select the item to play and press [OK].
You may be able to use convenient
functions depending on the content by
pressing [OPTION].
To exit from Home Network
Press [HOME].
Home Network feature
Before using the following features, be sure to
configure the connected equipment on your
Home Network.
[BDT280]
Using Miracast
TM
You can enjoy the content you are viewing on a
Miracast-compatible smartphone, etc. on the big
screen of your TV.
Compatible with Android
TM
devices, ver. 4.2
and above and Miracast certified.
For information on whether the smartphone,
etc. supports Miracast, contact the
manufacturer of the device.
1 Press [MIRACAST].
2 Operate the Miracast compatible device.
On the device, enable Miracast and select
this unit as the device to be connected.
For details, refer to the instructions
supplied with the device.
To exit from Miracast
Press [HOME].
Player
Miracast compatible
device
[BDT280] [BDT180]
Playing back contents on the
DLNA server
1 Press [HOME].
2 Select “Network”.
3 Select “Home Network”.
4 Select “DLNA Client”.
[BDT280] The connection method can be
switched to Wi-Fi Direct by pressing the
green button on the remote control.
Player
Server
DMP-BDT280&180_EBGNGAGH-SQW0349.book 20 ページ 2020年4月13日 月曜日 午後4時23分
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39

Panasonic DMPBD84GN Operating instructions

Category
Blu-Ray players
Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI