ABSCO 23081SK-PTX User manual

Brand
ABSCO
Model
23081SK-PTX
Type
User manual

This manual is also suitable for

ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTXABSCO INDUSTRIES PAGE
1
16/07/19
Space Saver Shed
Assembly Instructions
Model: 23081SK-PTX
CONCRETE SLAB
PAGE 1
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23081S 14/12/10 USA CANADA
Absco Space Saver Shed
Assembly Instructions
Model: 23081S
We thank you for choosing an Australian Made Shed. For further assistance please
visit our detailed instructional video library at http://www.absco.com.au/videos.php
At ABSCO Industries we are always looking to be number ONE, so please let us
know what you think of our instructions. Feedback makes us better.
[email protected].
10mm (0.39")
50mm (1.97")
THIS WILL ENSURE THAT
CLEAR FROM YOUR SHED
WATER RUN OFF IS KEPT
2360mm
(92.91")
880mm
(34.65")
FRONT BASE
LENGTH:
2.26m (88.98")
SIDE BASE
LENGTH:
0.75m (29.53")
FRONT WALL
HEIGHT:
1.95m (76.77")
REAR WALL
HEIGHT:
2.08m (81.89")
WHEN LAYING YOUR CONCRETE SLAB,
CHAMFER THE 50mm (1.97") EDGES
DOWNWARDS BY 10mm (0.39").
50mm
(1.97")
INSTRUCTIONS
AND VIDEOS
Space Saver Shed
Model: 23081SK-PTX
ABSCO INDUSTRIES PAGE
2
16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX
Premier Garden Shed - Model: J30232G
PAGE 2
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30232G 26/02/14
GENERAL INSTRUCTIONS
A NOTE ON SAFETY
The site for the shed must be level.
It is recommended that the shed be set on a 4" concrete slab and
anchored down appropriately (refer last page for details).
Anchor sets are not supplied as standard items with this product.
Before commencing any assembly, read through these instructions in
detail to gain a thorough understanding of assembly methods and
associated details.
Unpack the carton and carefully identify and check off all the parts
against the parts described and illustrated on pages three and four.
Some parts may have sharp edges. It is advisable to wear gloves when
handling these items and safety glasses if drilling holes. Sensible shoes
are highly recommended.
Do not erect your shed in windy conditions, ensure that the shed is
securely anchored to a solid foundation immediately after construction is
completed.
It is highly recommended to erect the shed with two or more people.
TOOLS REQUIRED
SITE PREPARATION
Normal 1/8", 11/64"
Masonry 25/64"
Normal 25/64"
OPTIONAL
INSTRUCTIONS
AND VIDEOS
Space Saver Shed
Model: 23081SK-PTX
ABSCO INDUSTRIES PAGE
3
16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX
COMPONENTS PACKING LIST - CHECK OFF ALL COMPONENTS
PAGE 3
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23081S 14/12/10 USA CANADA
Absco Space Saver Shed
Model: 23081S
2
COMPONENT
DESCRIPTION
PART
No.
CHECK
COMPONENT
DESCRIPTION
PART
No.
CHECK
QTY QTY
43B
1
1
1
3
2
1
1
43C
X4L
X4R
43D
STEEL SHEET
1725mm (67.91")
(67.91") X 773mm
(30.43")
B
1
1
1
2
2
2
1
61B
CHANNEL
L = 786mm (30.95")
CHANNEL
L = 773mm (30.43")
81J
32A
54A
CHANNEL
L = 2253mm (88.70")
54C
CHANNEL
L = 2253mm (88.70")
54B
CHANNEL
L = 2253mm (88.70")
81D
CHANNEL
L = 2253mm (88.70")
81C
CHANNEL
L = 2253mm (88.70")
79B
CHANNEL
L = 788mm (31.03")
STEEL SHEET
1915mm (75.39")
X 773mm (30.43")
STEEL SHEET
1915mm (75.39")
X 773mm (30.43")
STEEL SHEET
1915mm (75.39")
X 773mm (30.43")
STEEL SHEET
1915mm (75.39")
X 773mm (30.43")
STEEL SHEET
865mm (34.05") X
773mm (30.43")
STEEL SHEET
1785mm (70.27")
X 731mm (28.78")
INSTRUCTIONS
AND VIDEOS
Space Saver Shed
Model: 23081SK-PTX
ABSCO INDUSTRIES PAGE
4
16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX
PAGE 4
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23081S 14/12/10 USA CANADA
Absco Space Saver Shed
Model: 23081S
COMPONENT
DESCRIPTION
PART
No.
CHECK
COMPONENT
DESCRIPTION
PART
No.
CHECK
QTY QTY
CONTENTS OF FITTINGS PACKET
COMPONENTS PACKING LIST - (CONT.) CHECK OFF ALL COMPONENTS
1
1
2
89A
1
1
2
2
91A
JAMB L= 1120mm (44.09")
88B
58A
CHANNEL WITH HINGES
L = 1725mm (67.91")
58B
CHANNEL
L = 1725mm (67.91")
58C
CHANNEL
L = 773mm (30.43")
89B
1
90B
JAMB L= 788mm (31.03")
6
4mm (0.16") CSK
SCREW & NUT SECURE
HINGES TO DOOR
(ALTERNATE METHOD)
220
SELF TAPPING
SCREWS
1
1
DOOR
PADBOLT
1
DOOR
PADBOLT
HASP
6
3mm (0.12") POP RIVETS
SECURE HINGES TO DOOR
1
ASSEMBLY
INSTRUCTIONS
12A
1
DOOR
STRAP
L: 165mm
(6.50")
22A
JAMB L= 1785mm (70.27")
JAMB L= 1785mm (70.27")
LIP TRIM L= 865mm
(34.05")
RIVET GUN
INSTRUCTIONS
AND VIDEOS
Space Saver Shed
Model: 23081SK-PTX
ABSCO INDUSTRIES PAGE
5
16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX
VIEW OF ROOF COMPONENTS
PAGE 5
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23081S 14/12/10 USA CANADA
Absco Space Saver Shed Model: 23081S
INSTRUCTIONS
AND VIDEOS
Space Saver Shed
Model: 23081SK-PTX
ABSCO INDUSTRIES PAGE
6
16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX
VIEW OF WALL COMPONENTS
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23081S 14/12/10 USA CANADA
Absco Space Saver Shed
Model: 23081S
PAGE 6
INSTRUCTIONS
AND VIDEOS
Space Saver Shed
Model: 23081SK-PTX
ABSCO INDUSTRIES PAGE
7
16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX
PAGE 7
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23081S 14/12/10 USA CANADA
Absco Space Saver Shed
Model: 23081S
ABSCO ASSEMBLY INTRODUCTION
FASTENING SYMBOLS
The snap-tite assembly system locks most perimeter channels to all roof and wall
sheets without the need for tools and fasteners.
To pre-assemble the four wall panels
and two roof panels, the perimeter
channels are secured to the top and
bottom of each panel using the
snaptite system, as detailed on the
following pages wherever you see
the symbol.
Position sheets on timbers,
trestles or partly over edge of
concrete slab.
Each perimeter channel must finish flush
with the edges of the sheets. the snap-tite
system allows adjustment for this
process by simply tapping the channel
along the sheets until each end is neatly
flush.
Join components together with one screw at this
location only, as some channel sections have extra
holes that are not required for this model of garden
shed
Do not join components together at this location yet,
as the screw may obstruct further assembly of other
components
4mm (0.16") NUT & BOLT SET
3mm (0.12") POP RIVETS
PUSH
PUSH
HIGH SIDE
HIGH SIDE
PUSH
HIGH SIDE
HIGH SIDE
After joining sheets together,
position channel over one end of the
sheets, gently tapping it over the
snaptite lugs, working along the
sheets to the other end.
HIGH SIDE
SNAP
T TE
i
INSTRUCTIONS
AND VIDEOS
Space Saver Shed
Model: 23081SK-PTX
ABSCO INDUSTRIES PAGE
8
16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX
PAGE 8
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23081S 14/12/10 USA CANADA
Absco Space Saver Shed
Model: 23081S
DOOR PANEL ASSEMBLYDOOR PANEL ASSEMBLY
58C
58C
58A
B
B
58B
12A
20mm (0.79")
FLANGE
15mm (0.59")
FLANGE
INSTRUCTIONS
AND VIDEOS
Space Saver Shed
Model: 23081SK-PTX
ABSCO INDUSTRIES PAGE
9
16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX
REAR PANEL ASSEMBLY
Absco Space Saver Shed
43B
43C
43B
54B
81D
INSTRUCTIONS
AND VIDEOS
Space Saver Shed
Model: 23081SK-PTX
ABSCO INDUSTRIES PAGE
10
16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX
PAGE 10
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23081S 14/12/10 USA CANADA
Absco Space Saver Shed
Model: 23081S
SIDE PANEL ASSEMBLY
(TWO REQUIRED)
X4L
X4R
61B
81J
INSTRUCTIONS
AND VIDEOS
Space Saver Shed
Model: 23081SK-PTX
ABSCO INDUSTRIES PAGE
11
16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX
ROOF PANEL ASSEMBLY
PAGE 11
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23081S 14/12/10 USA CANADA
Absco Space Saver Shed
Model: 23081S
43D
43D
43D
81C
88B
81C
88B
INSTRUCTIONS
AND VIDEOS
Space Saver Shed
Model: 23081SK-PTX
ABSCO INDUSTRIES PAGE
12
16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX
PAGE 12
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23081S 14/12/10 USA CANADA
Absco Space Saver Shed
Model: 23081S
FRONT PANEL ASSEMBLY
89B
89A
32A
32A
54A
79B
54C
90B
INSTRUCTIONS
AND VIDEOS
Space Saver Shed
Model: 23081SK-PTX
ABSCO INDUSTRIES PAGE
13
16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX
PAGE 13
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23081S 14/12/10 USA CANADA
Absco Space Saver Shed
Model: 23081S
NOTE: The two holes required to connect the padbolt hasp for each door have not been pre-punched, to allow
for proper alignment. position each hasp centrally over the padbolt shaft, and drill 3mm (0.12") holes and
secure with screws
NOTE: NUTS AND BOLTS (SUPPLIED) MAY BE USED
INSTEAD OF POP RIVETS (SUPPLIED) BY SIMPLY
ENLARGING THE HINGE HOLE SETS IN THE JAMB
USING A 4mm (0.16") DRILL BIT
91A
91A
B
B
INSTRUCTIONS
AND VIDEOS
Space Saver Shed
Model: 23081SK-PTX
ABSCO INDUSTRIES PAGE
14
16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX
PAGE 14
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23081S 14/12/10 USA CANADA
Absco Space Saver Shed
Model: 23081S
PANEL CONSTRUCTION
NOTE: Take care to ensure that both front
and rear wall panels are not positioned
upside down. The top channel of each
panel is pre-punched for attaching roof
sheet. The base channels are not
pre-punched.
SIDE WALL PANEL CHANNELS FIT
INTO THE NOTCHED FRONT AND
REAR WALL PANEL CHANNELS
INSTRUCTIONS
AND VIDEOS
Space Saver Shed
Model: 23081SK-PTX
ABSCO INDUSTRIES PAGE
15
16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX
FINAL CONSTRUCTION
PAGE 15
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23081S 14/12/10 USA CANADA
Absco Space Saver Shed
Model: 23081S
DYNABOLT
BOLT & NUT
STEEL
ANGLE
SLAB
WALL
SHEET
- EACH ANCHOR CONSISTS OF ONE NUT, BOLT,
DYNABOLT AND STEEL ANGLE
- DRILL A 10mm (0.39") HOLE INTO THE WALL SHEET
- DRILL A 10mm (0.39") HOLE INTO THE CONCRETE
ANCHORING OF SHED
LOCATION OF 8
CONCRETE ANCHORS
INSTRUCTIONS
AND VIDEOS
Space Saver Shed
Model: 23081SK-PTX
ABSCO INDUSTRIES PAGE
16
16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX
1 | P a g e
EXPORT PRODUCT WARRANTY
AGAINST DEFECTS
Congratulations on your purchase of an ABSCO SHED
ABSCO SHEDS, including garden sheds, garden beds, aviaries, storage units, garages,
awnings and carports are made using high quality Australian made steel.
We are pleased to advise we warrant that the steel coating will not rust, crack, flake peel or
blister for 12 years from date of purchase.
This warranty does not apply to surface deterioration of panels caused
by ‘Swarf” (Tiny
particles of steel debris left from cutting, grinding or drilling operations) that has not been
removed after building construction, or as a result of contact with damp soil, chemicals,
fertilisers or other corrosive substances.
This warranty covers any Absco product used for normal domestic use and installed in
accordance with the installation instructions.
This warranty does NOT cover Damage caused by storms, wind, rain, sn
ow or poor
foundations.
This warranty does NOT cover ABSCO products installed in severe coastal, industrial or
other highly corrosive environments. The warranty does not cover fasteners (screws, nuts,
bolts, rivets, hasps or sliding padbolts).
The warranty is limited to replacement and delivery of components and does not include any
labour or installation costs. The benefits given by the warranty are in addition to your other
rights and remedies under a law in relation to the goods
or services to which the warranty
relates.
In the unlikely event a warranty claim is made, it must be supported by photographic
evidence and details of the defect, including component part numbers, together with proof
of purchase documentation (or on-line registration of purchase) and forwarded to the
address below. Upon receipt of the warranty claim, the Customer Service Manager will
contact you within three business days to advise you of the assessment
outcome of the
claim, which may include your expenses incurred in making the claim.
THE CUSTOMER SERVICE MANAGER, ABSCO SHEDS, PO BOX 119 ACACIA RIDGE QLD AUSTRALIA 4110
PHONE: +61 1800 029701 EMAIL: wa[email protected]m.au
Issued 16 July 2019
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

ABSCO 23081SK-PTX User manual

Brand
ABSCO
Model
23081SK-PTX
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents