ABSCO AB1001 User manual

Brand: ABSCO

Model: AB1001

Type: User manual

Sorry, there is no information on ABSCO AB1001 in the text provided.

ASSEMBLY INSTRUCTION - MODEL: 30232GK-PTXABSCO INDUSTRIES PAGE

16/07/19

Premier Garden Shed

Assembly Instructions

Model: 30232GK-PTX

Premier Garden Shed

Assembly Instructions

Model: J30232G

CONCRETE SLAB

PAGE 1

ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30232G 26/02/14

FRONT: 9' 10 7⁄64"

SIDE: 7' 4 31⁄32"

HEIGHT: 6' 10 43⁄64"

10' 2 3⁄64"

7' 8 29⁄32"

We thank you for choosing an Australian Made Shed. For further assistance please

visit our detailed instructional video library at

www.abscosheds.com.au/USA

At ABSCO Industries we are always looking to be number ONE, so please let us

know what you think of our instructions. Feedback makes us better.

[email protected]

WHEN LAYING YOUR CONCRETE

SLAB, ENSURE THERE IS A REBATED

EDGE 1" DEEP AROUND THE PERIMETER

CONCRETE

SLAB

REBATED EDGE

CHANNEL

CONCRETE SLAB

3" WIDE

REBATE

THIS WILL HELP

WATER EGRESS FROM

THE BASE OF THE SHED

INSTRUCTIONS

AND VIDEOS

Premier Garden Shed

Model: 30232GK-PTX

ABSCO INDUSTRIES PAGE

16/07/19ASSEMBLY INSTRUCTION - MODEL: 30232GK-PTX

Premier Garden Shed - Model: J30232G

PAGE 2

ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30232G 26/02/14

GENERAL INSTRUCTIONS

A NOTE ON SAFETY

The site for the shed must be level.

It is recommended that the shed be set on a 4" concrete slab and

anchored down appropriately (refer last page for details).

Anchor sets are not supplied as standard items with this product.

Before commencing any assembly, read through these instructions in

detail to gain a thorough understanding of assembly methods and

associated details.

Unpack the carton and carefully identify and check off all the parts

against the parts described and illustrated on pages three and four.

Some parts may have sharp edges. It is advisable to wear gloves when

handling these items and safety glasses if drilling holes. Sensible shoes

are highly recommended.

Do not erect your shed in windy conditions, ensure that the shed is

securely anchored to a solid foundation immediately after construction is

completed.

It is highly recommended to erect the shed with two or more people.

TOOLS REQUIRED

SITE PREPARATION

Normal 1/8", 11/64"

Masonry 25/64"

Normal 25/64"

OPTIONAL

INSTRUCTIONS

AND VIDEOS

Premier Garden Shed

Model: 30232GK-PTX

ABSCO INDUSTRIES PAGE

16/07/19ASSEMBLY INSTRUCTION - MODEL: 30232GK-PTX

COMPONENTS PACKING LIST - CHECK OFF ALL COMPONENTS

Premier Garden Shed - Model: J30232G

PAGE 3

ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30232G 26/02/14

COMPONENT

DESCRIPTION

PART

No.

CHECK

COMPONENT

DESCRIPTION

PART

No.

CHECK

QTY

STEEL SHEET

5' 10 9⁄32" Long

2' 6 7⁄16" Wide

STEEL SHEET

5' 10 9⁄32" Long

2' 6 7⁄16" Wide

STEEL SHEET

5' 7 29⁄32" Long

2' 6 7⁄16" Wide

STEEL SHEET

5' 7 29⁄32" Long

2' 6 7⁄16" Wide

STEEL SHEET

3' 10 1⁄16" Long

2' 6 7⁄16" Wide

STEEL SHEET

6' 3 25⁄64" Long

2' 6 7⁄16" Wide

STEEL SHEET

6' 3 25⁄64" Long

2' 6 7⁄16" Wide

STEEL SHEET

6' 5 61⁄64" Long

2' 6 7⁄16" Wide

STEEL SHEET

5' 10 9⁄32" Long

2' 3 63⁄64" Wide

30A

31A

49A

36L

36R

42D

34A

QTY

89A

90A

89C

91A

86A

15A

JAMB L= 5' 7 29⁄32"

JAMB L= 5' 1 47⁄64"

JAMB L= 5' 7 29⁄32"

JAMB L= 3' 8 3⁄32"

LIP TRIM

L= 3' 10 1⁄16"

PEAK BRACE

1' 7 19⁄64"

Part No. Here

INSTRUCTIONAL

VIDEOS

INSTRUCTIONS

AND VIDEOS

Premier Garden Shed

Model: 30232GK-PTX

ABSCO INDUSTRIES PAGE

16/07/19ASSEMBLY INSTRUCTION - MODEL: 30232GK-PTX

COMPONENTS - SPLICED CHANNEL & RIDGE BEAM

Premier Garden Shed - Model: J30232G

PAGE 4

ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30232G 26/02/14

COMPONENT

DESCRIPTION

PART

No.

CHECK

COMPONENT

DESCRIPTION

PART

No.

CHECK

QTY

55AL

55CL

55BL

81BL

81AL

81CL

60AL

97AL

CSJ

QTY

55CR

ZARSP

RIDGE

BEAM

THESE COMPONENTS

ARE TO BE

JOINED

TO THESE COMPONENTS

CHANNEL

L = 4' 10 59⁄64"

CHANNEL

L = 4' 10 59⁄64"

CHANNEL

L = 4' 10 59⁄64"

CHANNEL

L = 4' 10 59⁄64"

CHANNEL

L = 4' 10 59⁄64"

CHANNEL

L = 3' 811⁄32"

CHANNEL

L = 4' 10 59⁄64"

L = 4' 11 7⁄8"

CHANNEL JOINER

L= 7 7⁄8"

RIDGE BEAM JOINER

L= 1' 5 23⁄32"

55BR

81BR

81AR

81CR

60AR

97AR

55AR

CHANNEL

L = 4' 10 59⁄64"

CHANNEL

L = 4' 10 59⁄64"

CHANNEL

L = 4' 10 59⁄64"

CHANNEL

L = 4' 10 59⁄64"

CHANNEL

L = 4' 10 59⁄64"

CHANNEL

L = 4' 10 59⁄64"

RIDGE

BEAM

CHANNEL

L = 3' 811⁄32"

L = 4' 11 7⁄8"

5AL

81BR

55C

5AR

OIN

N >

JOIN

OIN

COMPONENTS - SPLICED CHANNEL & RIDGE BEAM

Premier Garden Shed - Model: J30232G

PAGE 4

ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30232G 26/02/14

COMPONENT

DESCRIPTION

PART

No.

CHECK

COMPONENT

DESCRIPTION

PART

No.

CHECK

QTY

55AL

55CL

55BL

81BL

81AL

81CL

60AL

97AL

CSJ

QTY

55CR

ZARSP

RIDGE

BEAM

THESE COMPONENTS

ARE TO BE

JOINED

TO THESE COMPONENTS

CHANNEL

L = 4' 10 59⁄64"

CHANNEL

L = 4' 10 59⁄64"

CHANNEL

L = 4' 10 59⁄64"

CHANNEL

L = 4' 10 59⁄64"

CHANNEL

L = 4' 10 59⁄64"

CHANNEL

L = 3' 811⁄32"

CHANNEL

L = 4' 10 59⁄64"

L = 4' 11 7⁄8"

CHANNEL JOINER

L= 7 7⁄8"

RIDGE BEAM JOINER

L= 1' 5 23⁄32"

55BR

81BR

81AR

81CR

60AR

97AR

55AR

CHANNEL

L = 4' 10 59⁄64"

CHANNEL

L = 4' 10 59⁄64"

CHANNEL

L = 4' 10 59⁄64"

CHANNEL

L = 4' 10 59⁄64"

CHANNEL

L = 4' 10 59⁄64"

CHANNEL

L = 4' 10 59⁄64"

RIDGE

BEAM

CHANNEL

L = 3' 811⁄32"

L = 4' 11 7⁄8"

55AL

55CL

55BL

81BL

81BR

55BR

55CR

55AR

JOIN >>

INSTRUCTIONS

AND VIDEOS

Premier Garden Shed

Model: 30232GK-PTX

ABSCO INDUSTRIES PAGE

16/07/19ASSEMBLY INSTRUCTION - MODEL: 30232GK-PTX

FULL LENGTH CHANNELS & ACCESSORIES

Premier Garden Shed - Model: J30232G

PAGE 5

ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30232G 26/02/14

79A

CHANNEL

L = 5' 1 47⁄64"

COMPONENT

DESCRIPTION

PART

No.

CHECK

COMPONENT

DESCRIPTION

PART

No.

CHECK

QTY QTY

83L

CHANNEL

L = 3' 9"

58A

83R

CHANNEL

L = 3' 9"

58B

CHANNEL

L = 5' 7 29⁄32"

58C

CHANNEL

L = 2' 6 7⁄16"

CHANNEL WITH HINGES

L = 5' 7 29⁄32"

12 12

1 1

14A

12A

220

SELF TAPPING

SCREWS

SELF DRILLING HEX

HEAD TEK SCREWS (NO

HOLE REQUIRED)

5/32" NUT & BOLT SET

SECURE TWO

PADBOLTS TO DOOR

SHEET

11/64" CSK SCREW &

NUT SECURE HINGES

TO DOOR

1/8" DRILL BIT

ASSEMBLY

INSTRUCTIONS

HEX TEK SCREW

DRIVER BIT

DOOR

PADBOLT

HASP

DOOR

PADBOLT

CAP GABLE

L: 6 11⁄16"

DOOR

STRAP

L: 6 1⁄2"

POP RIVETS SECURE

HINGES TO DOOR

RIVET GUN

(ALTERNATE METHOD)

INSTRUCTIONS

AND VIDEOS

Premier Garden Shed

Model: 30232GK-PTX

ABSCO INDUSTRIES PAGE

16/07/19ASSEMBLY INSTRUCTION - MODEL: 30232GK-PTX

PUSH

Premier Garden Shed - Model: J30232G

PAGE 6

ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30232G 26/02/14

INSTRUCTIONS FOR JOINING SPLICED CHANNELS

CSJ

HIGH-SIDE

CHANNEL

LOW-SIDE

CHANNEL

CSJ

= =

STEP 1.

Position the channels and the CSJ

joiner channel so the center of the

CSJ is in line with the end of each

channel to be joined together.

STEP 2.

Join the first channel to the CSJ by inserting the center

of the CSJ (on an angle) to the end of the channel

where the JOIN>> text is marked. Push down one side

of the CSJ until you hear a 'click'.

STEP 3.

Join the second channel to the CSJ

by positioning the <<JOIN end of the

channel at the center of the CSJ

(on an angle). Push the CSJ into

the channel until you here a 'click'.

The joined channels should now

look like the picture above with the

CSJ positioned equally inside of the

joined channels.

FINISHED CHANNEL

NOTE: THE TEXT MARKED ON ALL PARTS MUST BE SHOWN ON THE SAME SIDE AS EACH OTHER.

JOIN>> <<JOIN

JOIN>>

<<JOIN

JOIN>> <<JOIN

CSJ

DRILL 4 x 1/8" (2 PER SIDE)

HOLES TO SECURE SECTIONS

TOGETHER. (THESE SCREWS

MAY HAVE TO BE TEMPORARILY

REMOVED AND REPLACED

DURING LATER ASSEMBLY)

INSTRUCTIONAL

VIDEOS

INSTRUCTIONS

AND VIDEOS

Premier Garden Shed

Model: 30232GK-PTX

ABSCO INDUSTRIES PAGE

16/07/19ASSEMBLY INSTRUCTION - MODEL: 30232GK-PTX

Premier Garden Shed - Model: J30232G

PAGE 7

ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30232G 26/02/14

2 X 60AR

9' 9 53⁄64"

STEP 1. PRE-ASSEMBLY OF SPLICED CHANNELS

2 x 81A

2 x 60A

1 x 55A

1 x 55C

1 x 55B

1 x 81B

2 x 81C

NOTE: JOIN TOGETHER 20 X CHANNEL SECTIONS USING 10 X CHANNEL JOINERS (PART CSJ)

7' 4 45⁄64"

81BL

81CR

81CL

81BR

55BR

55BL

55CL

55CR

55AR

55AL

60AL

60AR

81AR

81AL

2 X 81AR

2 X 81AL

2 X 60AL

1 X 55AR

1 X 55AL

1 X 55CR

1 X 55CL

1 X 55BR

1 X 55BL

1 X 81BR

1 X 81BL

2 X 81CR

2 X 81CL

NOTE: SOME CHANNELS HAVE

HOLES IN THEM - YOU WILL NEED

TO RE-DRILL HOLES ON ANY

CHANNEL WHERE THE CSJ

JOINING CHANNEL COVERS

HOLES ON THE CHANNELS

YOU ARE CONNECTING

INSTRUCTIONAL

VIDEOS

INSTRUCTIONS

AND VIDEOS

Premier Garden Shed

Model: 30232GK-PTX

ABSCO INDUSTRIES PAGE

16/07/19ASSEMBLY INSTRUCTION - MODEL: 30232GK-PTX

PAGE 8

ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30232G 26/02/14

STAGE 1: PUSH RIDGE BEAMS TOGETHER, MAKE SURE THERE IS A 2" OVERLAP

OF THE RIDGE CAP

STAGE 2: INSERT RIDGE CAP JOINER INTO CONNECTED RIDGE CAPS.

MAKE SURE JOINER HAS 8 55/64" IN EACH RIDGE CAP.

STAGE 3: TURN RIDGE CAP OVER AND MEASURE 9 27⁄32" FROM THE END

OF EACH RIDGE CAP.

PLACE TEK SCREWS IN 2" INCREMENTS FROM SAID END.

REPEAT THIS PROCESS FOR THE OPPOSING HALF OF RIDGE BEAM

INSTRUCTIONS FOR JOINING SPLICED RIDGE BEAM

8 55⁄64"

Premier Garden Shed - Model: J30232G

INSTRUCTIONAL

VIDEOS

INSTRUCTIONS

AND VIDEOS

Premier Garden Shed

Model: 30232GK-PTX

ABSCO INDUSTRIES PAGE

16/07/19ASSEMBLY INSTRUCTION - MODEL: 30232GK-PTX

Premier Garden Shed - Model: J30232G

PAGE 9

ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30232G 26/02/14

TEK SCREW DRIVER BIT

QTY. = 1

QTY. = 8

QTY. = 2

QTY. = 1

SELF DRILLING TEK SCREW

PART ZARSP - 1' 5 23⁄32"

ZARSP

RIDGE BEAM 4' 11 7⁄8"

PARTS 97AL & 97AR

STEP 2. PRE-ASSEMBLY OF SPLICED RIDGE BEAM

97AL

97AR

5/8"

7 7/8"

9 27⁄32"

9' 9 53⁄64" OVERALL LENGTH

(PART 97A)

5/8"

THE TOP SECTIONS OF

CAPPING WILL OVERLAP

EACH OTHER AT THE

JOIN BY 2.0".

INSTRUCTIONAL

VIDEOS

INSTRUCTIONS

AND VIDEOS

Premier Garden Shed

Model: 30232GK-PTX

ABSCO INDUSTRIES PAGE

16/07/19ASSEMBLY INSTRUCTION - MODEL: 30232GK-PTX

86A

60A

14A

86A

81A

86A

VIEW OF ROOF COMPONENTS

14A

81A

97A

49A

PAGE 10

ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30232G 26/02/14

Premier Garden Shed - Model: J30232G

INSTRUCTIONS

AND VIDEOS

Premier Garden Shed

Model: 30232GK-PTX

ABSCO INDUSTRIES PAGE

16/07/19ASSEMBLY INSTRUCTION - MODEL: 30232GK-PTX

81C

83L

55B

83R

83L

15A

55A

30A

31A

81B

81C

36L

42D

36R

34A

91A

79A

55C

91A

89A

83R

90A

36R

42D

36L

34A

VIEW OF WALL COMPONENTS

ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30232G 26/02/14

Premier GardenShed

Model: J30232G

PAGE 11

INSTRUCTIONAL

VIDEOS

INSTRUCTIONS

AND VIDEOS

Premier Garden Shed

Model: 30232GK-PTX

ABSCO INDUSTRIES PAGE

16/07/19ASSEMBLY INSTRUCTION - MODEL: 30232GK-PTX

PAGE 12

ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16

Premier Garden Shed

Model: 30152GK

INSTRUCTIONS

AND VIDEOS

ABSCO ASSEMBLY INTRODUCTION

FASTENING SYMBOLS

The snaptite assembly system locks most perimeter channels to all roof and wall

sheets without the need for tools and fasteners.

To pre-assemble the four wall panels

and two roof panels, the perimeter

channels are secured to the top and

bottom of each panel using the

snaptite system, as detailed on the

following pages wherever you see

the symbol.

Position sheets on timbers,

trestles or partly over edge of

concrete slab.

Each perimeter channel must finish flush with the

edges of the sheets.The snaptite system allows

adjustment for this process by simply tapping the

channel along the sheets until each end is neatly

flush. If you need to remove channels from the

panels, pull the channel along the panel from

opposing ends. You may need someone to help

with this.

Join components together with one screw at this

location only, as some channel sections have extra

holes that are not required for this model of garden

shed

Do not join components together at this location yet,

as the screw may obstruct further assembly of other

components

4mm NUT & BOLT SET

3mm POP RIVETS

PUSH

HIGH SIDE

PUSH

HIGH SIDE

After joining sheets together, position channel over one end of the sheets, gently

tapping it over the snaptite lugs, working along the sheets to the other end.

HIGH SIDE

SNAP

T TE

SNAP

T TE

SNAP

T TE

Join components together by pre-drilling the holes

first. Use one component as a template to mark where

the holes are. Drill with 3mm drill bit.

INSTRUCTIONS

AND VIDEOS

Premier Garden Shed

Model: 30232GK-PTX

ABSCO INDUSTRIES PAGE

16/07/19ASSEMBLY INSTRUCTION - MODEL: 30232GK-PTX

DOOR PANEL ASSEMBLY

25/32" FLANGE

58C

12A

58C

Premier Garden Shed - Model: J30232G

ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30232G 26/02/14

PAGE 13

58A

19/32" FLANGE

89C

58B

FOUR HOLE SET

FOR PADBOLT

CONNECTION

ATTACH 58A AND 58B TO SHEET B SO THAT

THE 25/32" SIDE OF THE CHANNELS ARE ON

THE OUTSIDE OF SHEET B

ENSURE CHANNEL 58C

OUTER FLANGE SITS OVER

UPRIGHT CHANNEL FLANGE

ATTACH 58C CHANNELS

AS DESCRIBED ON PAGE 12

ATTACH 89C WITH COLORED

SIDE FACING OUT.

INSTRUCTIONAL

VIDEOS

INSTRUCTIONS

AND VIDEOS

Premier Garden Shed

Model: 30232GK-PTX

ABSCO INDUSTRIES PAGE

16/07/19ASSEMBLY INSTRUCTION - MODEL: 30232GK-PTX

INSIDE

SHED

REAR PANEL ASSEMBLY

SIDE PANEL ASSEMBLY

(2 Required)

Premier Garden Shed - Model: J30232G

PAGE 14

ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30232G 26/02/14

30A

31A

30A

55B

81B

36L

42D

36R

83R

81C

83L

15A

ATTACH 55B AND 81B CHANNEL WITH NOTCHED END AS SHOWN

LAY SHEETS OUT AS SHOWN

ATTACH 81C, 83L AND 83R CHANNEL AS SHOWN

INSTALL PEAK BRACE WITH OVERHANG FITTING INSIDE SHED

INSTRUCTIONAL

VIDEOS

INSTRUCTIONS

AND VIDEOS

Premier Garden Shed

Model: 30232GK-PTX

ABSCO INDUSTRIES PAGE

16/07/19ASSEMBLY INSTRUCTION - MODEL: 30232GK-PTX

Premier Garden Shed - Model: J30232G

PAGE 15

ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30232G 26/02/14

2 x PRE-PUNCHED

HOLES TO THIS

END OF EACH

SHEET WITH PART

NO. 81A FITTED

ROOF PANEL ASSEMBLY

(2 Required)

49A

60A

86A

81A

86A

LAY SHEETS OUT AS SHOWN

ATTACH LIPS 86A AS SHOWN.

LIPS SHOULD OVERLAP ROOF

CHANNEL 81A AND 60A.

INSTRUCTIONAL

VIDEOS

Premier Garden Shed

Model: 30232GK-PTX

ABSCO INDUSTRIES PAGE

16/07/19ASSEMBLY INSTRUCTION - MODEL: 30232GK-PTX

Premier Garden Shed - Model: J30232G

PAGE 15

ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30232G 26/02/14

2 x PRE-PUNCHED

HOLES TO THIS

END OF EACH

SHEET WITH PART

NO. 81A FITTED

ROOF PANEL ASSEMBLY

(2 Required)

49A

60A

86A

81A

86A

LAY SHEETS OUT AS SHOWN

ATTACH LIPS 86A AS SHOWN.

LIPS SHOULD OVERLAP ROOF

CHANNEL 81A AND 60A.

INSTRUCTIONAL

VIDEOS

INSTRUCTIONS

AND VIDEOS

FRONT PANEL ASSEMBLY

ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30232G 26/02/14

89A

55A

90A

79A

55C

34A

PAGE 16

Premier Garden Shed - Model: J30232G

NOTCH ON JAMB 90A FITS OVER JAMB 89A AND 89B

AND NOTCH ON 89B AND 89A FITS OVER 55A

NOTCH ON JAMB 89A AND 89B FITS

OVER CHANNEL 55C AND CHANNEL

79A INSERTS INTO 55C WITH

SHORTEST SIDE FACING OUT.

DO NOT INSTALL THIS SCREW

(OR THE TOP EQUIVALENT)

UNTIL CHANNELS 55A AND 55C

ARE INSTALLED

79A

55C

89A

LAY SHEETS OUT AS SHOWN

55A

90A

89A

INSTRUCTIONAL

VIDEOS

INSTRUCTIONS

AND VIDEOS

Premier Garden Shed

Model: 30232GK-PTX

ABSCO INDUSTRIES PAGE

16/07/19ASSEMBLY INSTRUCTION - MODEL: 30232GK-PTX

DOOR PANEL ASSEMBLY

NOTE: Nuts and bolts (supplied) may be

used instead of pop rivets (supplied) by

simply enlarging the hinge hole sets in the

jamb using a 5/32" drill bit

PAGE 17

ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16

91A

Premier Garden Shed

Model: 30152GK

INSTRUCTIONS

AND VIDEOS

NOTE: The two holes required to connect the padbolt hasp for ea

ch door have not been pre-punched, to allow for

proper alignment. position each hasp centrally over the padbolt

shaft, and secure with screws. The sheet metal

screws supplied have the ability to self drill through the chanscrews supplied have the ability to self drill through the channel, use a continuous firm pressure and high drillnel, use a continuous firm pressure and high drill

speed and the screws will penetrate the sheet metal. If necessaspeed and the screws will penetrate the sheet metal. If necessary a 3mm drill bit can be used.ry a 3mm drill bit can be used (1/8")