Kmart 43113439 User manual

Warning

CHOKING HAZARD, small parts. Not suitable for children under 3 years.

Adult assembly required.

Parts List

Tray (A x1pc) Left Leg (B x1pc) Right Leg (C x1pc) Wheel (D x1pc) Handle (E x2pc)

Bolt M5x12mm(F x2set)Bolt M5x18mm(G x4set) Bolt M8x50mm(H x1set)

Assembly Instruction

Note: To assemble easily and successfully, please keep the cap nut at the bottom side and the bolts fastened at 70% tightness while

installing the parts. Once assembled, fasten all bolts and cap nuts tightly ensuring they are secure and cannot loosen. Assembly

tools are not included (screwdriver & wrench).

Step 1. Lay the tray (A) on its side, then connect the handle (E) to the tray securing with bolts (G). Repeat this process

for both handles.

Step 2. Connect the right leg (C) with the part base of the handle on the underside of the tray, then secure them with

bolts F & G. Repeat steps for the left leg.

Step 3. Insert the metal tube of part (H) into the hole of wheel (D), then place the wheel in the middle between the

two legs, secure them with bolt (H).

Fasten all the bolts, then your wheelbarrow is now ready to use.

FOR AU/NZ: IMPORTED FOR KMART STORES IN AUSTRALIA AND NEW ZEALAND.

Made in China

METAL WHEELBARROW

Key Code: 43113439