888-97-354-G-00 rev. B • 12/14
1/5
StyleView® SV43/44 Storage Drawer
User Guide
12.5"
(315 mm)
10.5"
(267 mm) 10.5"
(267 mm)
3.75"
(96 mm)
2.5"
(64 mm)
or
<0.25 lbs (0.1 kg)< 2 lbs (1 kg)
User's Guide - English
Guía del usuario - Español
Manuel de l’utilisateur - Français
Gebruikersgids - Deutsch
Benutzerhandbuch - Nederlands
Guida per l’utente - Italiano
Användarhandbok - svenska
ENGLISH
Total weight capacity per drawer. Total weight capacity per drawer.
For the latest User Installation Guide please visit: www.ergotron.com
888-97-354-G-00 rev. B • 12/14
2/5
A
1
2
1x
14mm (9/16")
2x
M4 x 12mm
1x 3x or
3x
1x 9x
ENGLISH
1 Drawer 3 Drawers
CAUTION:
Close worksurface before opening drawers.
Open only one drawer at a time.
Do Not push cart when drawers or worksurface are open.
When adding more than 3 drawer rows to a LiFe cart, max loading is:
LCD: 11 lbs (5 kg)
CPU: 10 lbs (4.5 kg)
Keyboard/mouse: 2 lbs (0.9 kg)
Worksurface: 0 lbs (0 kg)
Drawer contents: 2 lbs (0.9 kg) max per drawer row
Failure to follow these instructions may cause the cart to be unstable.
WARNING
IMPACT HAZARD!
MOVING PARTS CAN CRUSH AND CUT.
Minimize Lift Tension BEFORE:
· Removing Mounted Equipment.
· Shipping Cart
· Storing Cart
To Minimize Lift Tension
1. Lower worksurface to lowest position.
2. Turn adjustment nut at top of riser
counterclockwise until it stops
(Adjustment may require 40-60 revolutions).
Failure to heed this warning may result in
serious personal injury or property damage!
For More information and instructions refer to product
guide at http://4support.ergotron.com or contact
Ergotron Customer Care at 1-800-888-8458.
822-052
14mm (9/16”)
NOTE: When removing drawers from the cart, make sure to
disconnect the cable.
Important! You will need to adjust this product after installation is complete. Make sure all your equipment is properly installed on the product
before attempting adjustments. This product should move smoothly and easily through the full range of motion and stay where you set it. If
movements are too easy or di cult or if product does not stay in desired positions, follow the adjustment instructions to create smooth and
easy movements. Depending on your product and the adjustment, it may take many turns to notice a di erence. Any time equipment is added
or removed from this product, resulting in a change in the weight of the mounted load, you should repeat these adjustment steps to ensure safe
and optimum operation.
Safety
Components
Tools Needed
888-97-354-G-00 rev. B • 12/14
3/5
2
1a
b
ENGLISH
Slide the drawer onto the bottom tracks of the last drawer.
Remove the top drawer(s).
Remove plug cover.
888-97-354-G-00 rev. B • 12/14
4/5
3
4
5
2x
M4 x 12mm
ENGLISH
To unlock the storage drawer, turn key counter clockwise 1/4 turn.
Replace the
top drawer(s).
Secure the bottom drawer by
attaching the two screws.
888-97-354-G-00 rev. B • 12/14
5/5
6
14mm (9/16")
ENGLISH
Adjustment
It is important that you adjust this product according to the weight of the mounted equipment as described
in the following steps. Any time equipment is added or removed from this product, resulting in a change
in the weight of the mounted load, you should repeat these adjustment steps to ensure safe and optimum
operation.
Adjustments should move smoothly and easily through the full range of motion and stay where you set it. If
adjustments are di cult and do not stay in the desired position, follow the instructions to loosen or tighten
the tension to create a smooth, easy adjustment motion. Depending on your product and the adjustment, it
may take several turns to notice a di erence.
Release Brake to move riser.
Follow these instructions to tighten or loosen tension.
Lift – Up and down
NOTE: Adjustment
may require 40 - 60
revolutions.
NOTE: Adding more than 3 rows of drawers per cart may mean balanced lift adjustment of the cart may not
be possible without reducing weight of LCD, laptop, CPU, and/or drawer contents.
-
1
-
2
-
3
-
4
-
5
Ergotron 97-864 User guide
- Type
- User guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Ergotron 97-862 User guide
-
-
-
Ergotron StyleView User guide
-
-
Ergotron SV44-12A2-1 Installation guide
-
-
-
-