SonicWALL SWS14-48 Quick start guide

SonicWall

®

Switch 10-Port / 24-Port /

48-Port Series

Quick Start Guide

Regulatory Model Numbers:

1RK43-0E3 SWS12-10FPOE

1RK44-0E4 SWS14-24

1RK45-0E5 SWS14-24FPOE

1RK46-0E6 SWS14-48

1RK47-0E7 SWS14-48FPOE

SonicWall is a trademark or registered trademark of SonicWall Inc. and/or its affiliates in the U.S.A. and/or other countries. All other

trademarks and registered trademarks are property of their respective owners.

The information in this document is provided in connection with SonicWall Inc. and/or its affiliates’ products. No license, express or

implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of

SonicWall products. EXCEPT AS SET FORTH IN THE TERMS AND CONDITIONS AS SPECIFIED IN THE LICENSE AGREEMENT FOR THIS

PRODUCT, SONICWALL AND/OR ITS AFFILIATES ASSUME NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR

STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON- INFRINGEMENT. IN NO EVENT SHALL SONICWALL AND/OR ITS

AFFILIATES BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING,

WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION OR LOSS OF INFORMATION) ARISING OUT OF THE

USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF SONICWALL AND/OR ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. SonicWall and/or its affiliates make no representations or warranties with respect to the accuracy or completeness

of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without

notice. SonicWall Inc. and/or its affiliates do not make any commitment to update the information contained in this document.

For more information, visit https://www.sonicwall.com/legal.

For technical support and documentation, visit https://www.sonicwall.com/support.

Legend

WARNING: A WARNING icon indicates a potential for property damage, personal injury, or death.

CAUTION: A CAUTION icon indicates potential damage to hardware or loss of data if instructions are not followed.

IMPORTANT, NOTE, TIP, MOBILE, or VIDEO: An information icon indicates supporting information.

SonicWall Switch Quick Start Guide

3

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Check the Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Hardware Interface — 10-Port Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Hardware Interface — 24-Port Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Hardware Interface — 48-Port Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Installing the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Installing on a Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Managing the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Firewall Managed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Standalone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Safety and Regulatory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

SonicWall Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

SonicWall Switch Quick Start Guide

4

SonicWall Switch Quick Start Guide

5

1

Introduction

Thank you for purchasing a SonicWall Switch. SonicWall Switches provide greater security and performance

while enabling integrated security administration.

This Quick Start Guide provides hardware information and multiple setup options for connecting your

Switch and getting started with it.

SWS12-10FPOE

(PoE capable)

SWS14-24

SWS14-24FPOE

(PoE capable)

SWS14-48

SWS14-48FPOE

(PoE capable)

More details and complete instructions are

available online in the Switch Getting Started

Guide. Scan the QR code or go to https://

www.sonicwall.com/support/technical-

documentation/?category=Switch.

6

SonicWall Switch Quick Start Guide

Check the Package Contents

Aside from this booklet your package includes:

• SonicWall Switch

• 2 rack-mounting brackets with 8 screws

• Serial cable

• Safety, Environmental, and Regulatory Information booklet

• Power cable

NOTE: The included power cord is approved for use only in specific countries or regions. Before using a

power cord, ensure it is approved for use in your location.

添付の電源コードに関して : 電気安全を確保するために、弊社製品にご使用いただく電源コードは必ず

製品同梱の電源コードをご使用ください。この電源コードは他の製品では使用できません。

(8)

SonicWall Switch Quick Start Guide

7

Specifications

Specification SWS12-10FPOE SWS14-24 SWS14-24FPOE SWS14-48 SWS14-48FPOE

1 Gb RJ45 10 24 24 48 48

1 Gb SFP 2

1 / 10 Gb SFP+

1

1.Contact your SonicWall sales representative for information on available SonicWall SFP/SFP+ modules and

cables: https://www.sonicwall.com/customers/contact-sales/

444

4

Fans 1—213

Power Supply 180 W 25 W 480 W 60 W 900 W

Power Input 100-240 VAC

50-60 Hz

100-240 VAC

50-60 Hz

100-240 VAC

50-60 Hz

100-240 VAC

50-60 Hz

100-240 VAC

50-60 Hz

PoE Ports 8 — 24 — 48

PoE Standards 802.3af/at — 802.3af/at — 802.3af/at

PoE Power 130 W — 410 W — 730 W

Maximum PoE Power

per Port

30 W — 30 W — 30 W

Operating Temperature

0 — 40

o

C0 — 40

o

C0 — 40

o

C0 — 40

o

C0 — 40

o

C

Humidity

(non-condensing) 5 — 95% 5 — 95% 5 — 95% 5 — 95% 5 — 95%

8

SonicWall Switch Quick Start Guide

Hardware Interface — 10-Port Switch

6

8

1

5

10

3

4

11

13

15

14

12

2

7

9

SWS12-10FPOE

SonicWall Switch Quick Start Guide

9

1

Serial Console Port (RJ45)

8

Reset button: Press to reset the switch to current

settings. Press for 10 seconds to enter Recovery mode.

Note: Returns Switch to default configuration.

2

Power On LED

9

LAN Mode (per copper port): Off = No link;

Amber = active100 Mbps link;

Green = active 1 Gbps link;

PoE Mode: Off = No PoE activity;

Green = active PoE current;

Amber = PoE fault or overcurrent

3

Fault LED: Off = normal; Lit = Fault

10

Link/Activity LED (per copper port): Off = No link;

Solid Light = link on;

Blinking = packet transfer in process

4

PoE Max LED: Off = Additional PoE device may be

added; Lit = PoE power limit exceeded

11

RJ45 LAN Ports: 10/100/1000 Mbps RJ45 LAN ports

5

LAN Mode LED: Off = LAN mode off;

Lit = LAN mode on

12

SFP Link/Act (per SFP port): Off = No link; Green =

active link; Blinking = packet transfer in process

6

PoE Mode LED: Off = PoE mode off;

Lit = PoE mode on

13

SFP Speed (per SFP port): Off = No traffic; Green = 1

Gbps

7

LAN/PoE Mode Selector: Press to change between

LAN and PoE LED display modes. Refer to feature 9.

14

SFP Ports: 1 Gbps ports

15

AC Power Port

10

SonicWall Switch Quick Start Guide

Hardware Interface — 24-Port Switches

10

6

8

1

2

3

2

3

4

5

9

11

SWS14-24

SWS14-24FPOE

1

8

12

13

14

10

11

15

13

14

12

9

7

SonicWall Switch Quick Start Guide

11

1

Serial Console Port (RJ45)

8

Reset button: Press to reset the switch to current

settings. Press for 10 seconds to go to Recovery Mode.

Note: Returns Switch to default configuration.

2

Power On LED

9

RJ45 LAN Ports: 10/100/1000 Mbps RJ45 LAN ports

3

Fault LED: Off= normal; Lit = Fault

10

LAN Mode (per copper port): Off = No link;

Amber = active 100 Mbps link;

Green = active1 Gbps link.

PoE Mode: Off = No PoE;

Amber = excess PoE current;

Green = active PoE current

4

PoE Max LED: Off = Additional PoE device may be

added;

Lit = PoE power limit exceeded

11

Link/Act LED (per copper port): Off: No link;

Lit = link on;

Blinking= packet transfer in process

5

LAN Mode LED: Off = LAN mode off;

Lit = LAN mode on

12

SFP+ Ports (per SFP port}: Small Form Pluggable ports:

1 or 10 Gbps ports

6

PoE Mode LED: Off = PoE mode off;

Lit = PoE mode on

13

SFP+ Speed LED (per SFP+ port): Off = no packet

transfer; Green = 1 or 10 Gbps

7

LAN/PoE Mode Selector: Press to change between

LAN and PoE LED display modes. Refer to feature 10.

14

SFP+ Link/Act LED (per SFP+ port): Off = No link;

Green = active link;

Blinking = packet transfer in process

15

AC Power Port

12

SonicWall Switch Quick Start Guide

Hardware Interface — 48-Port Switches

SWS14-48

SWS14-48FPOE

10

6

7

8

1

2

3

4

5

9

11

1

8

12

13

14

10

11

15

13

14

9

12

2

3

SonicWall Switch Quick Start Guide

13

1

Serial Console Port (RJ45)

8

Reset button: Press to reset the switch to current

settings. Press for 10 seconds to go to Recovery Mode.

Note: Returns Switch to default configuration.

2

Power On LED

9

RJ45 LAN Ports: 10/100/1000 Mbps RJ45 LAN ports

3

Fault LED: Off= normal;

Lit = Fault

10

LAN Mode: (per copper port) Off = No link;

Amber = active100 Mbps link;

Green = active 1 Gbps link;

PoE Mode: Off = No PoE;

Amber = excess PoE current;

Green = active PoE current

4

PoE Max LED: Off = Additional PoE device may be

added; Lit = PoE power limit exceeded

11

Link/Act LED (per copper port): Off = No link; Lit = link

on; Blinking Light = packet transfer in process

5

LAN Mode LED: Off = LAN mode off;

Lit = LAN mode on

12

SFP+ Ports: Small Form Pluggable ports. 1 or 10 Gbps

ports

6

PoE Mode LED: Off = PoE mode off;

Lit = PoE mode on

13

SFP+ Speed LED (per SFP+ port): Off = no packet

transfer; Green = 1 or 10 Gbps

7

LAN/PoE Mode Selector: Press to change between

LAN and PoE LED display modes. See feature 10.

14

SFP+ Link/Act LED (per SFP+ port): Off = No link;

Green = active link;

Blinking = packet transfer in process

15

AC Power Port

14

SonicWall Switch Quick Start Guide

15

2

Installing the Switch

Installing on a Rack

To mount the Switch in a rack, attach the included rack mounting brackets to the Switch. Then connect the

Switch to the rack, securing the mounting brackets to the rack. The Switch can be mounted in an EIA

standard 19-inch rack, which can be placed in a wiring closet with other equipment.

16

SonicWall Switch Quick Start Guide

17

3

Managing the Switch

This section covers configuration of the Switch through a SonicWall firewall, or, through the SonicWall

Switch.

• Firewall Managed

• Standalone

18

SonicWall Switch Quick Start Guide

Firewall Managed

Zero-Touch Switch setup is available when connecting your Switch to a SonicWall firewall running SonicOS

6.5.4.6 or higher.

To prepare the firewall:

1 Configure the firewall interface where the Switch will be connected with a static IP address.

Navigate to MANAGE > Networks > Interfaces and click on the Configure symbol for the firewall

interface you wish to use. When the Interface Settings dialog box comes up, select a zone such as

LAN and Mode / IP Assignment as Static IP Mode. Then enter an IP address.

SonicWall Switch Quick Start Guide

19

192.168.2.1

20

SonicWall Switch Quick Start Guide

2 Click on the Advanced tab shown below and then select Enable Auto-Discovery of SonicWall

Switches. This will automatically add DHCP scope under the configured interface.

Page is loading ...

SonicWALL SWS14-48 Quick start guide

SonicWALL SWS14-48 Quick start guide

in other languages

Related papers

Other documents