Danfoss ECA 9018 User guide

Brand: Danfoss

Model: ECA 9018

Type: User guide

User guide

ECA 9018

VI.74.P1.02

087R9423

When the time switch is mounted in

the controller, voltage cut-in will start

charging the battery built into the

time switch. The time switch can be

set when figures and symbols

become visible.

Start the time switch by pressing

“Res.” and then

. The time switch

will now start at Monday 20.00 with

the standard programme: MON-

TUE-WED-THU-FRI, 06.00 to 22.00

and SAT-SUN, 07.00 to 23.00.

Day, time and standard programme

can be changed as follows:

Setting the correct day and time

Press

at the same time as “h”

(hours), “m” (minutes) and “→Day”

to make the setting. Weekdays are

numbered 1 - 7, Monday being no. 1.

Setting and changing start and

stop times (changing the

standard programme)

CH 1 (channel 1) and CH 2 (channel2)

can be set simultaneously or indivi-

dually. There are 42 memory settings

available for both channels. Start

and stop times can be in any order.

Please note:

A stop time will always

override a start time if several block

or day programmes overlap or if

stop and start times are identical.

Press:

1. “Prog.” until the required memory

setting, or a vacant memory

setting (- - : - -) is displayed.

2.

1 and 2 to select (start

time),

(stop time) or

“no symbol” (no programming) for

channels 1 and 2 respectively.

3. “h” to set hours and “m” to set

minutes.

4. “→Day” to go to the required

weekday or “Sel←” to select or

deselect weekdays.

Combinations (blocks) of several

days can be selected at random.

Repeat points 1 - 4 to program the

next start or stop time.

Manual override

By pressing

1 or 2 the

programme can be overidden to

give one of the following functions:

→ *) → → →

Auto ON - Manuel OFF - FIX ON - FIX OFF

or

→ *) → → →

Auto OFF - Manuel ON - Fix ON - FIX OFF

*) At the next change in the

programme, manual override

returns to Auto.

Programme check

By repeatedly pressing “Prog.” it is

possible to check the programme

point by point.

When the display shows “- - : - -” the

first vacant memory setting has

been reached.

The next press will display the

number of free memory settings that

can be used.

Example: “Fr 29” (29 points free).

Deletion of programmes

a) Deletion of whole programme

Press “Res.” (Reset) to delete all

settings, incl. time.

b) Deletion of one memory setting

1. Press “Prog.” until the required

memory setting is found.

2. Press “h” or “m” until the display

shows “- -” in either hours or

minutes.

3. Press “Prog.” or

for 3 seconds

to delete the selected memory

setting (“- -” flashes).

Summertime and wintertime

The time switch has a built-in year

time switch that automatically sets

the time 1 hour back or forward on

the days agreed throughout most of

Europe for the beginning/end of

summertime and wintertime. The

day, month and year must be set

when automatic changeover is

required:

Day and month:

Press “±1 h” at the

same time as “→Day”. The display

will now show the date 31:12. The

date can be changed by pressing

“h“, the month by pressing “m”.

Year:

Press “±1 h” to change the

display to year. Press “m” to change

the year.

When day, month and year have

been set, the programme must be

started by pressing

.

Note: If the above settings are not

made, the time can be set 1 hour

forward or back by pressing “±1 h”.

1

Danfoss ECA 9018 User guide

Brand: Danfoss

Model: ECA 9018

Type: User guide

Related papers

Other documents