en
•This appliance is to be connected and used in
accordance with the information stated on its
characteristicsplate.
•This appliance must be connected to an earthed
socket. If it is absolutely necessary to use an
extension cable, make sure that it is suitable for
16Aandhasasocketwithanearthconnection.
•Theironshouldnotbeusedifithasbeendropped,
if there are visible signs of damage or if it is
leakingwater.Itmustbecheckedbyanauthorized
Technical Service Centre before it can be used
again.
appliancewillberenderedinoperative.To restore
normal operation the appliance will have to be
takentoanauthorisedTechnicalServiceCentre.
•In order to avoid that, under unfavourable mains
conditions, phenomena like transient voltage
recommendedthattheironisconnectedtoapower
supplysystemwithamaximumimpedanceof0.27
supplycompanyforthesystemimpedanceatthe
interfacepoint.
•This appliance is not intended to be used by
persons(includingchildren)withreducedphysical,
sensoryormentalcapacities,orlackofexperience
and knowledge, unless they have been given
supervisionorinstructionconcerningtheuseofthe
appliancebyapersonresponsiblefortheirsafety.
•Childrenshouldbesupervisedtoensurethatthey
donotplaywiththeappliance.
theappliancewithwaterorbeforepouringoutthe
remainingwaterafteruse.
•Theappliancemustneverbeplaceddirectlyunder
•Theappliancemustbeusedandplacedonastable
surface.
•When placed on its stand, make sure that the
surfaceonwhichthestandisplacedisstable.
•The iron must not be left unattended while it is
connectedtothesupplymains.
•Unplugtheappliancefromthemainssupplyafter
eachuse,orifafaultissuspected.
•Theelectricalplugmustnotberemovedfromthe
socketbypullingthecable.
•Donotallowthepowercordtocomeintocontact
withthesoleplatewhenitishot.
•Do not leave the appliance exposed to weather
conditions(rain,sun,frost,etc.).
•Withtheaimofavoidingdangeroussituations,any
work or repair that the appliance may need, e.g.
replacingafaultymainscable,mustonlybecarried
TechnicalServiceCentre.
1. Handlewithcontactsensor.
2. ActiveControlAdvancedindicatorlamp.(clear
light)
3. Steamsettingselectionbutton.
4. Steamsettingindicatorlamps.
green=eco
red=max
5. Shotofsteambutton.
6. Spraybutton.
7. Waterinlet.
8. Fillingopeninglid.
9. Spraynozzle.
10.Watertank.
12.Soleplate.
13.Temperatureindex.
14.Temperaturecontrol.
15.Powercable.