Samsung LD220 Installation guide

English

中国语

日本語

한국어

▷ 连接显示器之前，

请您先参阅《用户指南》并安装 USB 显示器驱动程序。

▷ Before connecting the monitor,

please refer to the User Guide and install the USB Monitor Driver first.

▷ ご使用前に本インストールガイドをご参照いただき、

USBモニタードライバをインストールしてください。

▷ 사용전에 본 안내서를 참조하여

USB 모니터 드라이버를 반드시 설치한 후 사용하세요.

USB显示器安装指南

USB MONITOR

INSTALLATION GUIDE

USBモニターインストールガイド

USB 모니터 설치 안내서

SyncMaster LD190G

SyncMaster LD220

SyncMaster LD220G

BN68-02216B-00.indb 1 2009-03-05 �� 3:49:53

Page is loading ...

English - 1

1. Installation Requirements

▒ Recommended System Requirements

- CPU: Higher than Dual-Core 2.0 GHz

- RAM: Higher than 1GB

- Higher than USB 2.0

▒ Supported OS (Operating Systems)

Windows XP - Service Pack 1 or earlier: Not Supported

- Service Pack 2 or later: Supported

2000 - Service Pack 3 or earlier: Not Supported

- Service Pack 4 or later: Supported

Server 2003 Not Supported

Vista Supported

Mac Not Supported

리리리 Not Supported

Contents

The monitor can be operated with USB cable connection only. The monitor can be operated with D-sub cable connection as well.

N BeforeconnectingthemonitorwithUSBcable,pleaseinstalltheUSBMonitorDriverrst.

The USB Monitor Diver software can be found on the supplied CD.

USB MONITOR INSTALLATION GUIDE

1. Installation Requirements................................. 1

Recommended System Requirements

Supported OS (Operating Systems)

2. Connections ........................................................ 2

Monitor connection with USB cable

Monitor connection with D-SUB cable

3. USB Monitor Driver Installation ........................ 3

4. Using the Monitor ............................................... 4

Multi-monitor Configuration

Display Information Setup for USB Monitor

5. Q & A .................................................................... 6

- Windows XP Service Pack 2 or later

- Windows 2000 Service Pack 4 or later

- Windows Vista

N TondoutthePCoperatingsysteminformation,Rightclick'My

Computer'andchoose'Properties'andselect'General'tab.

English

BN68-02216B-00.indb 1 2009-03-05 �� 3:49:53

English - 2

2. Connections

▒ Monitor connection with USB cable

1 Connect the power cord ( ) to your monitor as shown above.

2 Connect the USB cable ( ) to monitor and PC as shown above.

3 More than 2 monitors connection with USB cable.

Connect the USB cable ( ) to two different monitors as shown above.

(LD220/LD220G models only)

Maximum of 4 monitors can be used at a same time with a serial USB connection.

Maximum of 6 monitors can be used at a same time with a parallel USB connection.

For more information, please refer to "User Manual" on the supplied CD.

N Mouse, keyboard and other external devices (DSC, MP3, external storage device and etc) can be connected

to monitor USB port as well.

▒ Monitor connection with D-SUB cable

1 Connect the power cord ( ) to your monitor as shown above.

2 Connect the D-SUB cable ( ) to monitor and PC as shown above.

IN

OUT

IN

OUT

IN

LD190G

LD220 / LD220G

A

C B

B

C

A

D

A

D

C

A

B

BN68-02216B-00.indb 2 2009-03-05 �� 3:49:56

English - 3

▀ USB Driver online download

Visit the Download Center (http://www.samsung.com) and

register your product.

▀ Display settings after program installation

Applicable mode: Extend mode

Mode position: Right hand side of the Main Screen

Mode rotation: 0°

3. USB Monitor Driver Installation

Make sure to begin the installation after your PC has booted completely.

N

If you turn off the monitor or remove the USB cable during installation, it may cause some error

to your PC and the installation will not be completed.

1 Insert the installation CD into your PC CD-ROM drive.

Click the USB Monitor Driver icon and start installation.

N

USB Monitor Driver Icon :

2 Click "OK" button and installation will progress.

Install DisplayLink Software for Samsung UbiSync Monitor

English

Install DisplayLink Software for Samsung UbiSync Monitor

Thi s is a legal agreem e nt be t ween y o u, th e end u s er, ("You ") and Displ a yLink

(U K) Lim i ted (" Displa y Link" ) . BY INSTALL ING T HIS SO F TWA RE, Y OU ARE

AGR EEING TO B E BOUN D BY THE TERMS O F TH I S AGREEM ENT.

Som e vers i ons of this s oftwa r e, onc e inst a lled, w ill c h eck fo r upda t ed sys tem

software at least once and then again at regular intervals unless y ou spe cif ica lly

disabl e d t h i s f e a ture when given thi s o p t i o n . No personal informa t i o n o r

inf ormati o n abou t your PC or the so f tware instal l ed on your P C is s e nt to our

up date se rver s durin g this proc ess. Accepti ng the End- User Li cens e Agreement

mea ns tha t you a ccept t his p r oduct f eatur e .

Au tomatic ally check for updates I A ccept Cance l

3 When connecting the monitor to PC with USB cable, the

following message (as shown picture) will appear on your PC

window in a sequential manner.

Found New Hardware

USB Human Interface Device

Found New Hardware

USB Human Interface Device

New display found: Samsung UbiSync Monitor

3. Samsung UbiSync Monitor (USB_0101-000000H4J800004)

Use the icon here to control the new display.

AM

4 When installation is completed, a monitor icon is created in

the system tray at the bottom of window screen. The installed

USB Monitor information is displayed as shown below.

Found New Hardware

USB Human Interface Device

Found New Hardware

USB Human Interface Device

New display found: Samsung UbiSync Monitor

3. Samsung UbiSync Monitor (USB_0101-000000H4J800004)

Use the icon here to control the new display.

AM

5 When the Driver installation is completed, please set

theUSBmonitortomulti-monitor.(►Page4)

LD190G

BN68-02216B-00.indb 3 2009-03-05 �� 3:49:57

English - 4

4. Using the Monitor

1Click'Start>Controlpanel>AppearanceandThemes>

Display'.

2Select'Settings'tab.

3Clicksecondmonitoriconandcheck'Extendmywindows

desktopontothismonitor'.

Thenclick'Apply'buttonshownasbelow.

Display Properties

Drag the monitor icons to match the physical arrangement of your monitors.

Themes

Desktop Screen Saver Appearance

Settıngs

Display :

Screen resolution

Less More

pixels

Color quality

Highest (32bit)

Use this device as the primary monitor.

Extend my Windows desktop onto this monitor.

Identify Trobleshoot... Advanced

OK Cancel

Apply

Display Properties

Drag the monitor icons to match the physical arrangement of your monitors.

Themes

Desktop Screen Saver Appearance

Settıngs

Display :

Screen resolution

Less More

pixels

Highest (32bit)

Use this device as the primary monitor.

Extend my Windows desktop onto this monitor.

Identify Trobleshoot... Advanced

OK Cancel

Apply

Display Properties

4Clickthe'Identify'buttonandcheckthegivennumberfor

each monitor. Arrange the monitor in order.

Display Properties

Drag the monitor icons to match the physical arrangement of your monitors.

Themes

Desktop Screen Saver Appearance

Settıngs

Display :

Screen resolution

Less More

pixels

Color quality

Highest (32bit)

Use this device as the primary monitor.

Extend my Windows desktop onto this monitor.

Identify Trobleshoot... Advanced

OK Cancel

Apply

Display Properties

Drag the monitor icons to match the physical arrangement of your monitors.

Themes

Desktop Screen Saver Appearance

Settıngs

Display :

Screen resolution

Less More

pixels

Highest (32bit)

Use this device as the primary monitor.

Extend my Windows desktop onto this monitor.

Identify Trobleshoot... Advanced

OK Cancel

Apply

Display Properties

5 Then click "OK" button.

▒ Multi-monitor Configuration

N Both USB monitor (USB Cable connection) and general monitor (D-SUB connection) have same multi-monitor

conguration.

N Forlaptop,"LCD+CRTDualView"modemustbeselectedrstbeforethemulti-monitorconguration.

Press the Fn + F4( )keycombinationonce.Thenthe'EasyDisplayManager'screenappearsinwhichyoucan

select a display device. Whenever you press the F4( ) key while holding down the Fn key, the selected option

is changed.

The conguration mentioned above appliesto SAMSUNGproduct only. Please awarethatit will havedifferent

congurationsforothermanufacturers.Therefore,properreferencetoacorrespondingmanualisrequired.

BN68-02216B-00.indb 4 2009-03-05 �� 3:49:57

English - 5

1 Because this USB monitor is recognized as a USB device, the DOS screen that appears for general monitors

when a PC is booting up is not displayed.

- In order to view booting information (DOS), use D-SUB cable (Analog Signal) connection.

2 USB monitor is not compatible to any software that requires 3D hardware acceleration.

- Real Player (Expansion mode is not supported.)

- Most 3D games

- Programs based on DirectX

3 Video Programs Support

- Power DVD : Win DVD(Version 5 or later), Windows Media Player (Version 10 or later)

- VLC Media Player

NDependingonPCinterfaceorincompatiblecodecpacks,itcancauseseriousplaybackissues,suchasickering

or choppy video on the screen.

4 If you connect more than one USB monitor, a blank screen will appear until PC recognizes the USB device.

Screen will be displayed after PC recognizes the USB device. (LD220/LD220G models only)

▒ Note

▒ Display Information Setup for USB Monitor

1 When USB Monitor Driver installation is completed, a

monitor icon is created in the system tray at the bottom of

the window screen.

AM

2 Click the monitor icon to display a list of connected USB

monitors.

e.g.,)ThefollowinggureshowswhentwoUSBmonitorsare

connected.

Selectthemonitorforwhichyouwanttocongure

thedisplaysettings.Youcancongurethe"Screen

Resolution" , "Color Quality" and "Screen Rotation"

settings for your monitor.

Screen Resolution

Color Quality

Screen Rotation

Extend To

Extend

Mirror

Off

Advance...

AM

BN68-02216B-00.indb 5 2009-03-05 �� 3:49:58

English - 6

Question Answer

I cannot turn on the monitor. ▷ Connect the power cable again.

There is no image on the screen. ▷ Unplug the power code and replug in.

▷ Connect the USB cable again.

▷ Install the USB driver.

▷ As USB port can be unstable, reboot your PC.

▷ PC'sUSBportmaybefaulty.Pleasetrytoconnectdifferentport.

▷ USB monitor may not work on USB 1.0.

▷ Any input from mouse or keyboard will activate the display if it is under the

power saving mode.

Ican'tinstallUSBDriverwiththe

supplied CD.

Download USB driver at Samsung Electronics website and install it.

[ http://www.samsung.com ]

After installing USB Driver, The

computer performance is slow.

As USB Driver takes more memory than the use of general graphic card,

computer performance may be lower than before.

After booting the PC, screen order is

changed.

Update your graphic card to the latest version.

N Forgraphiccarddriver,refertographiccardmanufacturer'shomepage.

Monitor resolution is changed.

Pleasemakeareferenceto[USBMonitorInstallationguide]-'Display

InformationSetupforUSBMonitor'forbestresolution(►Page5).

[Best Resolution - LD190G: 1360X768, LD220/LD220G: 1920x1080]

Whileplayinghighqualityvideole,

choppy video can be seen repeatedly.

Whenyouwatchhighqualityvideoleinfullscreenmode,itmayplayproperly

due to limited USB bandwidth. It is strongly recommend to decrease the window

size of the movie player.

Depending on PC interface or incompatible codec packs, it can cause serious

playbackissues,suchasickeringorchoppyvideoonthescreen.

IcanuseClonemode,butcan'tsetto

extend mode.

▷ Update your graphic card to the latest version.

NForgraphiccarddriver,refertographiccardmanufacturer'shomepage.

▷ Rightclick'Desktop'-'Property'-'Settings'tab.Check'Extendmywindows

desktopontothismonitor'.

▷ If graphic card does not support WDDM, Extend mode can not be used in

windows Vista. e.g.,) Some versions in Matrox Card

How can I remove the “USB Monitor

Installation Program” completely?

1. Click ‘Add/Remove Programs’ in the ‘Control Panel’. A list of ‘Currently Installed

Programs’ is displayed.

2. Select ‘Samsung UbiSync Monitor’ from the list and click ‘Remove’.

I disconnected or turned off my USB

monitor but my PC still displays the

old monitor information in the Display

Properties window.

Deactivated USB monitor is due to either the power is off or there is no USB

connection.

Inordertoremovethisinformation,'SamsungUbisyncMonitor'programmust

beremoved.Thiscanbedonebyclick'Start'-'ControlPanel'-'Add/Remove

Programs'-'SamsungUbisyncMonitor'-'Remove'.

All the connected USB monitors will not be able to use if the software program is

removed.

Installation software program must be installed again in ordr to use USB monitor.

The screen of USB monitor is frozen. Check "Hardware Acceleration" on desktop property.

1.Click'Start>ControlPanel>AppearanceandThemes>Display>Settings>

Advanced'.

2.Select'Troubleshoot'tab,whendisplayed.

Set the ‘Hardware acceleration(H)’ value to ‘Full’.

Icons and photos are broken or

jagged in Clone mode (USB monitor).

This occurs because Windows does not send the screen updating information to

Clone mode if Extended mode is active on a single PC. We recommend using the

monitor in Extend mode.

5. Q & A

BN68-02216B-00.indb 6 2009-03-05 �� 3:49:58

Page is loading ...

中国语 - 3

▀ 在线下载 USB 驱动程序

请访问下载中心 (http://www.samsung.com) 并注册

您的产品。

▀ 程序安装完成后的显示设置

适用模式：扩展模式

模式位置：主画面右侧

模式旋转： 0°

3. 安装 USB 显示器驱动程序

确保 PC 完全启动后再开始安装。

N

在安装过程中，如果您关闭了显示器或移除了 USB 缆线，都可能会导致 PC 出现故障，并且将无法

完成安装。

1 将安装光盘插入 PC 的 CD-ROM 驱动器中。

单击 USB 显示器驱动程序图标，开始安装。

N

USB 显示器驱动程序图标：

2 单击“I Accept”按钮进行安装。

Install DisplayLink Software for Samsung UbiSync Monitor

English

Install DisplayLink Software for Samsung UbiSync Monitor

Thi s is a legal agreem e nt be t ween y o u, th e end u s er, ("You ") and Displ a yLink

(U K) Lim i ted (" Displa y Link" ) . BY INSTALL ING T HIS SO F TWA RE, Y OU ARE

AGR EEING TO B E BOUN D BY THE TERMS O F TH I S AGREEM ENT.

Som e vers i ons of this s oftwa r e, onc e inst a lled, w ill c h eck fo r upda t ed sys tem

software at least once and then again at regular intervals unless y ou spe cif ica lly

disabl e d t h i s f e a ture when given thi s o p t i o n . No personal informa t i o n o r

inf ormati o n abou t your PC or the so f tware instal l ed on your P C is s e nt to our

up date se rver s durin g this proc ess. Accepti ng the End- User Li cens e Agreement

mea ns tha t you a ccept t his p r oduct f eatur e .

Au tomatic ally check for updates I A ccept Cance l

3 使用 USB 缆线将显示器连接到 PC 时，PC 窗口中

将按顺序显示如下消息（如图所示）。

Found New Hardware

USB Human Interface Device

Found New Hardware

USB Human Interface Device

New display found: Samsung UbiSync Monitor

3. Samsung UbiSync Monitor (USB_0101-000000H4J800004)

Use the icon here to control the new display.

AM

4 安装完成后，将会在 Window 画面底部的系统托盘中创建一

个显示器图标。已安装的 USB 显示器信息将显示如下。

Found New Hardware

USB Human Interface Device

Found New Hardware

USB Human Interface Device

New display found: Samsung UbiSync Monitor

3. Samsung UbiSync Monitor (USB_0101-000000H4J800004)

Use the icon here to control the new display.

AM

5 驱动程序安装完成后，请将 USB 显示器设置为多显

示器。（► 第 4 页）

LD190G

BN68-02216B-00.indb 3 2009-03-05 �� 3:50:01

中国语 - 4

1 单击“开始>控制面板>外观和主题>显示”。

2 选择“设置”选项卡。

3 单击第二个显示器图标并勾选“Extend my windows desktop

onto this monitor”。

然后单击如下所示的“Apply”按钮。

Display Properties

Drag the monitor icons to match the physical arrangement of your monitors.

Themes

Desktop Screen Saver Appearance

Settıngs

Display :

Screen resolution

Less More

pixels

Color quality

Highest (32bit)

Use this device as the primary monitor.

Extend my Windows desktop onto this monitor.

Identify Trobleshoot... Advanced

OK Cancel

Apply

Display Properties

Drag the monitor icons to match the physical arrangement of your monitors.

Themes

Desktop Screen Saver Appearance

Settıngs

Display :

Screen resolution

Less More

pixels

Highest (32bit)

Use this device as the primary monitor.

Extend my Windows desktop onto this monitor.

Identify Trobleshoot... Advanced

OK Cancel

Apply

Display Properties

4 单击“Identify”按钮并检查每个显示器的编号。按顺序

排列显示器。

Display Properties

Drag the monitor icons to match the physical arrangement of your monitors.

Themes

Desktop Screen Saver Appearance

Settıngs

Display :

Screen resolution

Less More

pixels

Color quality

Highest (32bit)

Use this device as the primary monitor.

Extend my Windows desktop onto this monitor.

Identify Trobleshoot... Advanced

OK Cancel

Apply

Display Properties

Drag the monitor icons to match the physical arrangement of your monitors.

Themes

Desktop Screen Saver Appearance

Settıngs

Display :

Screen resolution

Less More

pixels

Highest (32bit)

Use this device as the primary monitor.

Extend my Windows desktop onto this monitor.

Identify Trobleshoot... Advanced

OK Cancel

Apply

Display Properties

5 然后单击“确定”按钮。

4. 使用显示器

多显示器配置░

N USB 显示器（使用 USB 缆线连接）与一般显示器（使用 D-SUB 连接）都有相同的多显示器配置。

N 对于笔记本电脑，必须在进行多显示器配置之前，先选择“LCD+CRT Dual View”（LCD+CRT 双屏显示）模式。

按一下 Fn + F4( ) 组合键。将显示“Easy Display Manager（快捷显示管理器）”画面，您可以在此画面

中选择显示设备。按住 Fn 键后按 F4( ) 键将更改选定的选项。

上述配置仅适用于三星产品。请注意，对于其他厂商的产品将会有不同的配置。

因此，必须参考相应的操作手册。

BN68-02216B-00.indb 4 2009-03-05 �� 3:50:02

Page is loading ...

Samsung LD220 Installation guide

Samsung LD220 Installation guide

in other languages

Related papers

Other documents