Aqua Products M3 Super Wrap User manual

Type
User manual
M3 SUPER WRAP Instruction Guide
WWW.AQUAPRODUCTS.CO.UK
Pair your benchmark M3 with a
super wrap for supreme comfort.
M3 SUPER WRAP Specication
M3 Super Wrap
• Performance grade AQUATEXX®.
• Integral pole for added stability.
• Large porch area.
• Rear vent.
• 3 Front vents.
• Auger point pegs included.
• High quality Aqua carry bag included.
• Fits MK1, MK2 and M3 one man Armo’s.
• Weight of wrap: 6kg
Contents:
1 x M3 Super Wrap
1 x Clear Window
12 x Pegs
1 x Heavy Duty Carry Bag
Please check the contents of your new purchase and take
the time to read these basic instructions carefully before
assembling your new M3 Super wrap for the rst time.
1. Erect your M3 bivvy in the normal manner. allowing extra room at the front for the additional
length of the wrap.
2. Unwrap the Super wrap and assemble the 5 section pole ensuring that the spigots are fully
inserted and the pole takes on a natural curve.
3. Cover the bivvy with the wrap using the seams of the wrap as a rough guide. These should
follow the poles on the bivvy.
It is advisable that the rst time you use the wrap it is pitched at home in
your garden to familiarise yourself with your new purchase.
Take care to nd a suitable location in which to pitch your bivvy and take
note of the direction of any strong winds. You should take into consideration
factors such as the contours of the ground and that the ground is suitable to
peg down securely. The Supawrap will t MK1, MK2 & M3 one-man Armo’s.
5. Working from the rear and using the pegs supplied with the wrap (NOT the bivvy’s pegs) place
a peg in each ring and tension. The peg should mirror that of the bivvy but approximately 4” (or
10cm) behind the bivvy peg.
DO NOT PEG DOWN THE SIDES AT THIS STAGE.
6. Kneeling at the front of the bivvy/wrap hold the wrap at the base plate at the bottom of the
pole and pull forward keeping the pole in line with the three bivvy poles.
7. Now repeat the process on the other side - this ensures that the correct amount of tension
is applied to the pole.
8. Now place a peg in each remaining rings of the wrap, taking sucient tension and ensuring
that no part of the wrap comes into contact with the bivvy panels.
M3 SUPER WRAP Assembly
AQUATEXX® Care and maintenance
All Aqua products will provide you with years of service providing they are
well looked aer. We recommend that your wrap is always packed away dry
or is dried as soon as possible aer a session. This prevents mildew from
forming and in turn prevents damage to the materials used.
• We recommend using Grangers cleaning agents to clean your wrap.
• Wash your wrap while erect using warm water.
• Always dry thoroughly in the shade.
• Do not use detergents to clean your wrap.
• Do not use any abrasives or scrubbing agents/cloths.
• Avoid contact with fuel, oil (in baits/cooking) and chemicals as the stains from
these may be impossible to remove and will probably attack the fabric and damage the proong.
WARNING: The fabric used on this wrap is flammable. Using naked flames inside a wrap or
close to the fabric is a re hazard and should be avoided. C0 Carbon Monoxide emmisions are
dangerous and highly toxic. Avoid the use of cooking stoves and fuel burning heaters inside the
wrap without adequate ventilation.
• Avoid pitching under trees as sap may fall onto the outer and is almost impossible to remove.
• Over time the coating on the outside of the fabric will wear and the material will no longer form
droplets on the fabric and run o easily. We recommend that you re–proof the material annually.
The only product we recommend is Fabsil Gold by Grangers. Follow the Fabsil Gold instructions
when you re-proof the wrap.
Condensation
By using a wrap with your bivvy you will greatly reduce condensation. Any areas of the bivvy that
are not twin skinned can still be subject to condensation. It is common for moisture to build up
on the inside surface of your wrap. This is condensation and is perfectly normal. The use of a
groundsheet and avoiding cooking within the connes of your bivvy will also reduce the eects
of condensation.
Warranty
All Aqua products are designed and manufactured to exacting standards and are guaranteed for the
end purpose intended. Should the product fail during normal usage as a result of a component, mate-
rial or manufacturing fault, excluding fair wear and tear, then the product will be repaired or replaced
(with the same or a similar model from the current range) at our expense and discretion. All poles and
fabric colour fading due to over exposure to the sun are excluded from fair wear and tear.
This guarantee is only valid when your wrap is used for recreational purposes, not including com-
mercial usage, eg. hiring, use by outdoor centres etc. Repairs to damage caused by accident, use in
inappropriate conditions, and normal wear and tear will be carried out where possible at a reasonable
charge. Please ensure that all products are clean and dry prior to being returned. No consequential loss
may be claimed under this guarantee. This guarantee in no way aects your statutory rights.
Repairs
We oer a comprehensive repair service whereby most repairs can be carried out on site by our team
of trained machinists. In the rst instance please ensure that the wrap comes back to us in a clean, dry
condition. We do not have the facilities to dry wraps here at Aqua and for health and safety reasons
we will not work on a soiled wrap.
Clearly mark on the wrap where the fault is using chalk/low tack tape. Please supply a detailed list
of the faults, contents, contact numbers and return address details. There are forms available on our
website that can be downloaded, printed and lled out to aid this process - to view the forms please
visit www.aquaproducts.co.uk For warranty claims please ensure you send proof of purchase (direct
Aqua customers only). If purchased through one of our premier retailers your wrap must be returned
to them.
Please ensure the wrap is packaged so as not to cause further damage and ensure the package is
insured for the full value of the contents. We cannot be held responsible for damage caused in transit
or for lost parcels.
All repairs, unless under warranty, will be quoted for
before any work takes place and we aim to turn
around repairs within 10 working days, subject to
parts/peak times etc.
No wrap is guaranteed against storm damage.
M3 SUPER WRAP Care & Use
For twenty ve years we have craed some of angling’s best
made and most sought-aer products. Many of our original
bivvies are still in use today, pushing on through the weather
and going strong. This is something we’re very proud of.
www.aquaproducts.co.uk
Our website features the full Aqua Products® range including many more product images
to help you choose the right gear. We also have an extensive gallery of images to view
online plus product video demonstrations on the Aqua TV area. You can download the
latest catalogues, instruction manuals for our product ranges including care & use, bivvy
maintenance, condensation management and much more. Purchase directly through our
website and you also make savings on future orders with our loyalty scheme.
Join us
Register online with Aqua Products® and create a customer prole for speedy checkout
and exclusive member benets. Track the status of current orders, review previous orders
and recieve the latest product oers and news via our regular newsletter.
Follow us
Aqua Products® have a very loyal fan base so you can join in by following us on these
social media platforms:
Get in touch
If for any reason you need assistance or advice on our products, or have any comments and
suggestions then please do not hesitate to call, email or write to us.
Aqua Products, Melford Court, Hardwick Grange, Warrington, WA1 4RZ, United Kingdom
01925 852 033 (International +44 1925 852 033)
info@aquaproducts.co.uk
www.aquaproducts.co.uk
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Aqua Products M3 Super Wrap User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI