WEG SRW01 User guide

WEG
Brand
WEG
Model
SRW01
Type
User guide

WEG SRW01 is a communication module designed for use with WEG SRW01 soft starters. It enables communication between the soft starter and various industrial networks, including Profibus-DP, DeviceNet, and Modbus-RTU. With the help of this module, you can easily integrate the soft starter into your existing control system, monitor its status, and adjust its parameters remotely. Additionally, the SRW01 communication module allows for advanced features like fault diagnostics and preventive maintenance, enhancing the overall performance and reliability of your motor control system.

WEG SRW01 is a communication module designed for use with WEG SRW01 soft starters. It enables communication between the soft starter and various industrial networks, including Profibus-DP, DeviceNet, and Modbus-RTU. With the help of this module, you can easily integrate the soft starter into your existing control system, monitor its status, and adjust its parameters remotely. Additionally, the SRW01 communication module allows for advanced features like fault diagnostics and preventive maintenance, enhancing the overall performance and reliability of your motor control system.

Communication
Module - MC
Módulo de
Comunicación - MC
Módulo de
Comunicação - MC
SRW 01-MC
Installation Instruction
Instrucciones de Instalación
Instruções de Instalação
Motors | Automation | Energy | Transmission & Distribution | Coatings
Page is loading ...
3
English
WARNING!
Disconnect power before
proceeding with any work on
this equipment.
Installation and maintenance by
technical personnel only.
Attend the national, regional and
local standards and follow the
operating instructions.
Code Protocol
SRW 01 - MCP Profibus-DP
SRW 01 - MCD DeviceNet
SRW 01 - MCM Modbus-RTU
XC1
XC2
DB9
XC6
NOTE!
The communication cable for all
protocols should be connected to
terminal XC2. When using Profibus
or Modbus, it is also possible to
connect the communication cable
directly to the DB9 connector.
ATTENTION!
Consult the detailed pinout and
wiring diagram on the used
communication board manual.
4
English
Mounting
5
English
Dimensions
45
43
20
47
* Dimensions in mm.
ATTENTION!
The communication module must
be inserted or removed without
power applied to the SRW 01.
6
English
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

WEG SRW01 User guide

WEG
Brand
WEG
Model
SRW01
Type
User guide

WEG SRW01 is a communication module designed for use with WEG SRW01 soft starters. It enables communication between the soft starter and various industrial networks, including Profibus-DP, DeviceNet, and Modbus-RTU. With the help of this module, you can easily integrate the soft starter into your existing control system, monitor its status, and adjust its parameters remotely. Additionally, the SRW01 communication module allows for advanced features like fault diagnostics and preventive maintenance, enhancing the overall performance and reliability of your motor control system.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents