American Standard Champion 4 Round Front Toilet 2023.214 User manual

Brand: American Standard

Model: Champion 4 Round Front Toilet 2023.214

Type: User manual

K37

Revised 2/08

CHAMPION

ROUND FRONT TOILET

VITREOUS CHINA

To Be Specied:

❏ Color:

❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black

❏ Seat: (please specify color)

❏ Champion

Slow Close Round Front #5330.010

❏ Rise & Shine Round Front #5322.011

❏ EverClean

Round Front Seat with Slow Close

Snap-Off Hinges #5320.110

❏ Supply with stop:

CHAMPION

4 ROUND FRONT TOILET

❑ 2023.214

• Vitreous china

• EverClean

surface inhibits the growth of

stain- and odor-causing bacteria, mold,

and mildew on the surface

• Low-consumption (6.0 Lpf/1.6 gpf)

• Features Champion® 4 Flushing System

performance platform

• 4" non-adjustable, piston action Accelerator™

ush valve

• Siphon action jetted bowl

• 2-3/8" fully-glazed trapway

• Speed Connect

tank/bowl coupling system

• Chrome-plated trip lever

• Sweeping pier on bowl

• 100% factory ush tested

• 2 bolt caps

• 10 year warranty

❑ 3110.016 Bowl

❑ 4266.014 Tank

Nominal Dimensions:

721 x 464 x 797mm (28-3/8" x 18-1/4" x 31-3/8")

Fixture only, seat and supply by others

Alternate Tank Congurations Available:

❑ 4266.504 Tank complete with Aquaguard Liner

❑ 4266.604 Tank complete with tank cover

locking device

❑ 4266.704 Tank complete with Aquaguard Liner

and tank cover locking device

❑ 4266.804 Tank complete with trip lever

located on right side

❑ 4266.904 Tank complete with tank cover locking

device and trip lever located on right side

❑ 4266.954 Tank complete with Aquaguard Liner,

tank cover locking device, and trip lever

on right side

Compliance Certications -

Meets or Exceeds the Following Specications:

• ASME A112.19.2M for Vitreous China Fixtures -

includes Flush Performance, Ball Pass Diameter,

Trap Seal Depth and all Dimensions

• Los Angeles Department of Water and Power

Supplementary Purchase Specication for

Non-Adjustability - July, 2003 revision

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF

305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED

SEPARATELY.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of xtures are nominal and may vary within the

range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility

is assumed for use of superseded or voided pages.

SEE REVERSE FOR ADDITIONAL ROUGHING-IN

DIMENSIONS

K38

Revised 2/08

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF

305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED

SEPARATELY.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of xtures are nominal and may vary within the

range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility

is assumed for use of superseded or voided pages.

FINISHED WALL

51mm ± 6mm

(2 ± 1/4)

387mm

(15-1/4)

FINISHED

FLOOR

305mm

(12)

721mm

(28-3/8)

C/L OF OUTLET

83mm

(3-1/4)

235mm

(9-1/4)

419mm

(16-1/2)

C/L OF SEAT POST HOLES

140mm (5-1/2 CENTERS)

362mm

(14-1/4)

264mm

(10-3/8)

16mm

(5/8)

797mm

(31-3/8)

464mm

(18-1/4)

SUPPLY

REQ'D

254mm

(10)

152mm

(6)

254mm

(10)

356mm

(14)

CHAMPION

ROUND FRONT TOILET

VITREOUS CHINA

American Standard Champion 4 Round Front Toilet 2023.214 User manual

American Standard Champion 4 Round Front Toilet 2023.214 User manual

American Standard Champion 4 Round Front Toilet 2023.214 User manual

Related papers

Other documents