American Standard Cadet 3011.016 User manual

Brand: American Standard

Model: Cadet 3011.016

Type: User manual

K53

Revised 2/08

TROPIC CADET

ROUND FRONT TOILET

VITREOUS CHINA

To Be Specied:

❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black

❏ Seat: #5330.010 Round front Champion

Slow Close

solid plastic seat and cover with easy lift off feature

❏ Seat: #5282.011 Round Front EverClean

solid plas-

tic seat and cover

❏

Seat: #5320.110 EverClean

Round Front Seat with

Slow Close Snap-Off Hinges

❏ Supply with stop:

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF

305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED

SEPARATELY.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range

of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is

assumed for use of superseded or voided pages.

FINISHED WALL

FINISHED

FLOOR

C/L OF OUTLET

SUPPLY

REQ'D.

235mm

(9-1/4)

718mm

(28-1/4)

25mm ± 6mm

(1 ± 1/4)

102mm

(4)

416mm

(16-3/8)

476mm

(18-3/4)

740mm

(29-1/8)

*381mm

(15)

*203mm

(8)

305mm

(12)

333mm

(13-1/8)

216mm

(8-1/2)

C/L OF SEAT POST HOLES

140mm (5-1/2 CENTERS)

352mm

(13-7/8)

*152mm

(6)

235mm

(9-1/4)

TROPIC CADET

3 ROUND FRONT TOILET

❑ 2455.016

• Vitreous china

• EverClean

surface inhibits the growth of

stain- and odor-causing bacteria, mold,

and mildew on the surface

• Low-consumption (6.0 Lpf/1.6 gpf)

• Features the Cadet

3 Flushing System

• Space saving round front siphon action

jetted bowl

• Fully-glazed 2-1/8" trapway with 2" ball pass

• Generous 9" x 8" water surface area

• Close-coupled tank with at tank cover for

superior storage

• Oversized 3" ush valve with chemical

resistant apper

• Chrome trip lever

• Speed Connect

tank-to-bowl coupling system

• Sanitary dam on bowl with four point

tank stabilization

• 2 color-matched bolt caps

• 100% factory ush tested

• 5 year warranty

❑ 3011.016 Round Front Bowl

❑ 4007.016 Tank

Nominal Dimensions:

718 x 476 x 740mm (28-1/4" x 18-3/4" x 29-1/8")

Fixture only, seat and supply by others

Alternate Tank Congurations Available:

❑ 4007.516 Tank complete with Aquaguard Liner

Compliance Certications -

Meets or Exceeds the Following Specications:

• ASME A112.19.2M for Vitreous China Fixtures -

includes Flush Performance, Ball Pass Diameter,

Trap Seal Depth and all Dimensions

• Los Angeles Department of Water and Power

Supplementary Purchase Specication for

Non-Adjustability

K54

Revised 2/08

American Standard Cadet 3011.016 User manual

American Standard Cadet 3011.016 User manual

American Standard Cadet 3011.016 User manual

Related papers

Other documents