Cable Management Panels
TE Connectivity's AMP NETCONNECT Cable Management Panels provide a complete solution for routing and protecting
patch cords and station and equipment cabling. When mounted to EIA standard 19-inch racks, these panels eliminate cable
clutter, organize cable routing and conserve valuable rack space. All TE Cable Management Panels are suitable for use with
twisted pair, coaxial and optical fiber cables. Their field-proven designs help to maintain cable bend radii and simplify cable
administration and maintenance. Panels are available in single- and double-sided versions for both horizontal and vertical
cable management.
SPECIFICATION (TEXT IN BRACKETS [ ] REQUIRES A CHOICE.)
All equipment racks shall be augmented with a cable management system, comprised of [single-sided or double-sided]
horizontal and vertical panels. Horizontal panels shall be installed between patch panels such that cable fill per side does not
exceed 24 4-pair cables for 1U panels and 72 4-pair cables for 2U panels. Panels shall be comprised of PVC finger duct with a
snap-on cover. On 1U panels, the front duct shall be [1.5” X 2” or 1.5” X 3”]. On 2U panels, the front duct shall be 3” X 3”. Duct
on the vertical panels shall be 4” X 5”. Vertical panels shall be available in a side version for mounting on the side of a rack or
a center version for mounting between two racks. Cable fill for vertical managers shall not exceed 240 4-pair cables per side.
Horizontal (19" Wide)
Figure
Panel
Height
Front
(HXD)
Rear
(HXD) Part Number
A
” ”X” ”X” -
” ”X” ”X” -
” ”X” ”X” -
B
” ”X” - -
” ”X” - -
” ”X” - -
Vertical
Figure
Side
Mount
Front
(HXD)
Rear
(HXD) Length Part Number
C
”X” ”X” ” -
”X” ”X” ” -
D
”X” - ” -
”X” - ” -
CenterMount(mountingflangesonbothsidestostraddletworacks)
C
”X” ”X” ” -
”X” ”X” ” -
D
”X” - ” -
”X” - ” -
A B C D
DATA SHEET
Cable Management Panels
Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved.
318095AE 12/13 Revision © 2013, 2000
AMP NETCONNECT, TE Connectivity, TE connectivity (logo), Tyco Electronics, and TE (logo) are trademarks of the TE Connectivity Ltd.
family of companies and its licensors. All other logos, products and/or company names referred to herein might be trademarks of their
respective owners.
The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed
to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection
with its use. TE Connectivity's obligations shall only be as set forth in TE Connectivity's Standard Terms and Conditions of Sale for this
product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale,
use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each
such product for the specific application.
SPECIFICATIONS
Materials:
Panel: steel, painted black
Duct: rigid PVC
Packaging: 1 per box
Part Number
Carton
Weight-lbs
1375161-1 1.0
1375162-1 1.1
1375163-1 2.4
1375167-1 4.2
1375260-1 9.2
1375165-1 4.1
1375258-1 8.0
1375160-1 1.8
1375159-1 1.9
1375158-1 2.5
1375166-1 7.7
1375259-1 14.9
1375164-1 7.1
1375257-1 13.7
Contact us:
Greensboro, NC
USA 27409-8420
Tel: 1-800-553-0938
Fax: 1-717-986-7406
www.te.com/EnterpriseNetworks
/
