For your safety and preventing injury to you and others, please
read safety precautions carefully and use the product properly.
AP-SM
2 Series
AP-HM
2 Series
DB98-33503A(4)
THIS IS FOR KOREA UNIT STANDARD ONLY.
WE DO NOT GUARANTEE THE QUALITY FROM ABROAD.
Floor Stand Type
Samsung Air
Conditioner
User Manual
@AP-SM@@2 ���_IB_33503A(4)_E_110829.indd 28 2011-08-29 �� 3:31:55
1
Features of your new air conditioner
Contents
Environment-friendly air conditioner
●
Your environment-friendly air conditioner has achieved not
only high efficiency, low noise, and energy saving technol-
ogy but also certified RoHS technology.
Energy saving technology with S-inverter system
●
The S-inverter system that changes the capacity of the
air conditioner from 10% to 160% with one compressor
depending on the usage condition will provide optimal
cooling performance with less energy consumption by
reducing unnecessary electric consumption.
Powerful speed/Convenient remote operation
●
The speed operation will provide you with quick cooling and
heating for 30min and the remote operation will provide
you with cooling even for remote area.
(Heating operation applicable model: AP-SM
2 Series)
High efficiency purifying function for four seasons
●
Since the purifying function can operate separately, the
energy consumption and operation noise can be further
reduced. When operating the air conditioner, the virus
doctor function works continuously using a sterilization
function that removes harmful substances from the air
and a neutralizing active oxygen function that will provide
you with a healthy and clean environment.
Auto air flow blades
●
The auto air flow blade that opens and closes according to
the on or off operation of the air conditioner increases the
usage convenience and it also prevent dust from coming
into the air conditioner when the air conditioner is not used
for a long term.
Preparation
Safety precautions
............................................................2
Checking before use
..........................................................5
Basic function
Viewing the parts
..............................................................7
Checking the remote controller
...........................................11
Basic operation
.................................................................13
Application
Speed operation
...............................................................15
Long operation
.................................................................15
Selecting the air flow direction
...........................................16
Purifying operation
...........................................................16
On/Off timer function
........................................................17
Others
Cleaning the air conditioner
...............................................19
Troubleshooting
................................................................21
Product specification
.........................................................23
Purifying operation
...........................................................24
@AP-SM@@2 ���_IB_33503A(4)_E_110829.indd 1 2011-08-29 �� 3:31:47
2
Safety precautions
These warning signs are here to prevent injury to you and others. Please follow them carefully.
WARNING
Hazards or unsafe practices that may result in severe personal injury or death.
CAUTION
Hazards or unsafe practices that may result in minor personal injury or property damage.
Follow directions. Unplug the power plug from the wall socket.
Do NOT attempt. Do NOT disassemble.
Make sure the machine is grounded to prevent electric shock.
FOR INSTALLATION
Plug the power cord into a wall socket with the power specifications of the product or higher
and use the socket for this appliance only. In addition, do not use an extension cord.
▶
Sharing a wall socket with other appliances using a power strip or extending the power cord
may result in electric shock or fire.
▶
Do not use an electric transformer. It may result in electric shock or fire.
▶
If the voltage/frequency/rated current condition is different, it may cause fire.
The installation of this appliance must be performed by a qualified technician or service company.
▶
Failing to do so may result in electric shock, fire, explosion, problems with the product, or injury.
Install a switch and circuit breaker dedicated to the air conditioner.
▶
Failing to do so may result in electric shock or fire.
Fix the outdoor unit firmly so that the electric part of the outdoor unit is not exposed.
▶
Failing to do so may result in electric shock or fire.
Do not install this appliance near a heater, inflammable material. Do not install this appliance in a humid, oily or dusty location,
in a location exposed to direct sunlight and water (rain drops). Do not install this appliance in a location where gas may leak.
▶
This may result in electric shock or fire.
Never install the outdoor unit in a location such as on a high external wall where it could fall.
▶
If the outdoor unit falls, it may result in injury, death or property damage.
This appliance must be properly grounded. Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.
▶
Failure to do so may result in electric shock, fire, an explosion, or other problems with the product.
▶
Never plug the power cord into a socket that is not grounded correctly and make sure that it is in accordance
with local and national codes.
FOR INSTALLATION
This appliance should be positioned in such a way that it is accessible to the power plug.
▶
Failing to do so may result in electric shock or fire due to electric leakage.
Install your appliance on a level and hard floor that can support its weight.
▶
Failing to do so may result in abnormal vibrations, noise, or problems with the product.
When installing the outdoor unit on the street, make sure to install it on the place with height over 2m or on
the place where warm air from the outdoor unit does not blow directly to the pedestrian.
▶
This is a policy on the architectural standards and it must be followed.
Install the draining hose properly so that water is drained correctly.
▶
Failing to do so may result in water overflowing and property damage.
When installing the outdoor unit, make sure to connect the draining hose so that draining is performed correctly.
▶
The water generated during the heating operation by the outdoor unit may overflow and result in property
damage. In particular, in winter, if a block of ice falls, it may result in injury, death or property damage.
(Applicable to only AP-SM
2 series)
@AP-SM@@2 ���_IB_33503A(4)_E_110829.indd 2 2011-08-29 �� 3:31:47
3
Safety precautions
FOR POWER SUPPLY
When the circuit breaker is damaged, contact your nearest service center.
Do not pull or excessively bend the power line. Do not twist or tie the power line. Do not hook the power line
over a metal object, place a heavy object on the power line, insert the power line between objects, or push the
power line into the space behind the appliance.
▶
This may result in electric shock or fire.
FOR POWER SUPPLY
When not using the air conditioner for a long period of time or during a thunder/lightning storm, cut the
power at the circuit breaker.
▶
Failing to do so may result in electric shock or fire.
FOR USING
If the appliance is flooded, please contact your nearest service center.
▶
Failing to do so may result in electric shock or fire.
If the appliance generates a strange noise, a burning smell or smoke, unplug the power plug immediately and
contact your nearest service center.
▶
Failing to do so may result in electric shock or fire.
In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without touching the power
line. Do not touch the appliance or power line.
▶
Do not use a ventilating fan.
▶
A spark may result in an explosion or fire.
To reinstall the air conditioner, please contact your nearest service center.
▶
Failing to do so may result in problems with the product, water leakage, electric shock, or fire.
▶
A delivery service for the product is not provided. If you reinstall the product in another location, additional
construction expenses and an installation fee will be charged.
▶
Especially, when you wish to install the product in an unusual location such as in an industrial area or near the
seaside where it is exposed to the salt in the air, please contact your nearest service center.
Do not touch the power plug or the
circuit breaker with wet hands.
▶
This may result in electric shock.
Do not strike or pull the air conditioner
with excessive force.
▶
This may result in fire, injury, or
problems with the product.
Do not place an object near the
outdoor unit that allows children
to climb onto the machine.
▶
This may result in children
seriously injuring themselves.
Do not turn the air conditioner off with the circuit
breaker while it is operating.
▶
Turning the air conditioner off and then on again with the
circuit breaker may cause a spark and rsult in electric shock
or fire.
After unpacking the air conditioner, keep all packaging materials well out of the reach of children, as packag-
ing materials can be dangerous to children.
▶
If a child places a bag over its head, it may result in suffocation.
Do not insert your fingers or foreign substances into the outlet when the air conditioner is operating.
▶
Take special care that children do not injure themselves by inserting their fingers into the product.
Do not touch the air flow blade with your hands or fingers during the heating operation.
▶
This may result in electric shock or burns. (Applicable to only AP-SM
2 series)
Do not insert your fingers or foreign substances into the air inlet/outlet of the air conditioner.
▶
Take special care that children do not injure themselves by inserting their fingers into the product.
@AP-SM@@2 ���_IB_33503A(4)_E_110829.indd 3 2011-08-29 �� 3:31:47
4
FOR USING
Do not use this air conditioner for long periods of time in badly ventilated locations or near infirm people.
▶
Since this may be dangerous due to a lack of oxygen, Open a window at least once an hour.
If any foreign substance such as water has entered the appliance, cut the power by unplugging the power plug
and turning the circuit breaker off and then contact your nearest service center.
▶
Failing to do so may result in electric shock or fire.
Do not attempt to repair, disassemble, or modify the appliance yourself.
▶
Do not use any fuse (such as cooper, steel wire, etc.)other than the standard fuse.
▶
Failing to do so may result in electric shock, fire, problems with the product, or injury.
FOR USING
Do not place objects or devices under the indoor unit.
▶
Water dripping from the indoor unit may result in fire or property damage.
Check that the installation frame of the outdoor unit is not broken at least once a year.
▶
Failing to do so may result in injury, death or property damage.
Do not stand on top of the appliance or place objects (such as laundry, lighted candles, lighted cigarettes,
dishes, chemicals, metal objects, etc.) on the appliance.
▶
This may result in electric shock, fire, problems with the product, or injury.
Do not operate the appliance with wet hands.
▶
This may result in electric shock.
Do not spray volatile material such as insecticide onto the surface of the appliance.
▶
As well as being harmful to humans, it may also result in electric shock, fire or problems with the product.
Do not drink the water from the air conditioner.
▶
The water may be harmful to humans.
Do not apply a strong impact to the remote controller and do not disassemble the remote controller.
Do not touch the pipes connected with the product.
▶
This may result in burns or injury.
Do not use this air conditioner to preserve precision equipment, food, animals, plants or cosmetics, or for any
other unusual purposes.
▶
This may result in property damage.
Avoid directly exposing humans, animals or plants from the air flow from the air conditioner for long periods of time.
▶
This may result in harm to humans, animals or plants.
FOR CLEANING
Do not clean the appliance by spraying water directly onto it. Do not use benzene, thinner or alcohol to clean the appliance.
▶
This may result in discoloration, deformation, damage, electric shock or fire.
Before cleaning or performing maintenance, unplug the air conditioner from the wall socket and wait until the fan stops.
▶
Failing to do so may result in electric shock or fire.
FOR CLEANING
Take care when cleaning the surface of the heat exchanger of the outdoor unit since it has sharp edges.
▶
To avoid cutting your fingers, wear thick cotton gloves when cleaning it.
Do not clean the inside of the air conditioner by yourself.
▶
For cleaning inside the appliance, contact your nearest service center.
▶
When cleaning the internal filter, refer to the descriptions in the ‘Cleaning and maintaining the air conditioner’ section.
▶
Failure to do may result in damage, electric shock or fire.
@AP-SM@@2 ���_IB_33503A(4)_E_110829.indd 4 2011-08-29 �� 3:31:47
5
Checking before use
Using indoor unit Using outdoor unit
Storing indoor unit
Make sure that curtain does not block the air inlet.
▶
It may decrease cooling or heating performance by
blocking air circulation.
In Cool mode, set the appropriate desired temperature.
▶
I
f the desired temperature is too low, it may be harmful
for human body and power consumption will also
increase. Set the desired temperature about 5˚C lower
han the outdoor temperature.
Use extra heating apparatus during heat mode.
▶
Heating performance of the air conditioner may
decrease when the indoor/outdoor temperature
drops therefore, use extra heating apparatus.
(Model : AP-SM
2 Series)
When cooling the room, use air conditioner and fan
together to save energy.
▶
When the air conditioner is used with fan, cooling will
be more effective and energy can be saved.
When the air conditioner is operating, close the doors
and windows.
▶
When the air conditioner is used with doors and
windows open, cooling(or heating) effect will
decrease.
▶
If you use the air conditioner for over an hour, open the
window to ventilate the air about once every hour.
Install the product away from sunlight or heating
devices.
▶
Close the curtain when the sun shines.
▶
Do not use any heating devices during cooling
operation. Cooling effect will decrease.
Take away any covers or barriers.
▶
It may cause product failure, and poor performance
in cooling (heating) by blocking air flow.
Installing outdoor unit
▶
Install the outdoor unit in well ventilated area with no
sunlight. If sunlight is unavoidable, install a sunshade.
▶
Dry the air conditioner thoroughly by operating
Fan mode for 3 to 4 hours.
▶
Stop the operation and disconnect the power plug
.
Turn on the auxiliary power switch which is installed
separately.
Checking auxiliary power switch
1phase circuit breaker
ON
3phase 4wire circuit breaker
• Do not move the product on your own. Pipe
may get loose or pipe can get damaged and
cause refrigerant leakage.
CAUTION
Auxiliary power switch(ELCB, ELB)
●
Auxiliary power switch is not included in the
package. Purchase and install it separately.
●
Auxiliary power switch is a device for
preventing over-current or short circuit.
When not using the auxiliary power switch for
a long term, it should be turned off.
●
If ELB has already been installed in the switch
box of the building, you don’t need to install
the auxiliary power switch.
@AP-SM@@2 ���_IB_33503A(4)_E_110829.indd 5 2011-08-29 �� 3:31:48
6
The heating capacity of heat pump way air conditioner on outdoor temperature(Applicable model: AP-SM
2 series )
Temperature and humidity range of operating an air conditioner
Heating capacity
Rated capacity
120 % of rated
capacity
80 % of rated
capacity
Outdoor temperature
-15℃ 7℃ 24℃
When the air conditioner operates outside of temperature and humidity range indicated below, protective
device may activate and stop the operation. Especially, when installing and performing the trial operation
of the air conditioner in the winter, start the operation 1 hour after you supply power to the unit. Product
malfunction may occur due to the drastic temperature difference between indoor and outdoor room.
▶
If the air conditioner operates in cooling mode for long period of time in high humidity area, dew may
be formed.
▶
When the outdoor temperature goes down to -15
℃
, the heating capacity may decrease to 70%~80%
according to the usage condition.
※
The information on heating operation is applicable to only AP-SM
2 model series.
Mode Indoor temperature Outdoor temperature Indoor humidity
Cool
21℃~32℃ -5℃~43℃
Relative humidity 80% or less
Dry
21℃~32℃ 21℃~43℃ -
※
Heat
0℃~30℃ -15℃~24℃ -
▶
What is heat pump?
Heat pump can raise heat from low temperature to high temperature. It also warms the indoor room further by
absorbing heat from outdoor room in the winter and providing the heat to indoor room.
▶
If the outdoor or indoor temperature is lower than the rated temperature(Indoor-20
℃
, outdoor-7
℃
) or the installation
condition is different(the length of pipe is longer than 5m, installation place and insulation), the heating capacity may
decrease even though the air conditioner performs normal operation.
▶
If the outdoor temperature goes below zero temperatures during the heat mode in the winter, the air conditioner itself
automatically performs protective operation. When disconnecting power from the product, the protection function for
the compressor may not operate and it will cause the product malfunction. Therefore, do not disconnect power of the
product in the winter.
@AP-SM@@2 ���_IB_33503A(4)_E_110829.indd 6 2011-08-29 �� 3:31:48
7
Viewing the parts
The picture and function of the indoor unit may different depending on the model.
Main parts
Air flow blade
(right/left orientation)
Air flow blade
(up/down orientation)
Air outlet
Air filter
Removes the dust of
incoming air
Control panel
Air intake
Intakes the outdoor air
To open the panel
Hold the upper part of the panel, then pull it slightly forward.
Don’t open the panel when it is operating.
It may cause a malfunction or an electrical hazard.
●
When handling the air intake plank, the safety
hooks on the air intake plank should be
connected.
Model : AP-SM132/152/182/232 Series, AP-HM232 Series
Virus doctor
@AP-SM@@2 ���_IB_33503A(4)_E_110829.indd 7 2011-08-29 �� 3:31:48
8
Air flow blade
(right/left orientation)
Control panel
Air flow blade
(up/down orientation)
Opens and closes according to the
operation of air conditioner
Heat exchanger
cleaning section
Part with which you can clean
the dust of a heat exchanger
Air outlet
Air filter
Removes the dust of
incoming air
Air intake
Intakes the outdoor air
To open the panel
Hold the upper part of the panel, then pull it slightly forward.
Don’t open the panel when it is operating.
It may cause a malfunction or an electrical hazard.
Model : AP-SM302/362/402 Series, AP-HM302/402 Series
Virus doctor
@AP-SM@@2 ���_IB_33503A(4)_E_110829.indd 8 2011-08-29 �� 3:31:48
9
Viewing the parts
Control panel
Locking the control panel
Outdoor unit operation indicator
Speed button
Air swing
(Up/Down) button
Air swing(Left/Right) button
Fans speed adjustment button
Mode selection button Power button
Temperature adjustment buttons
Operation indicators
Displays the temperature,
fan speed and operation
mode
Press the [
온도올림
][Temp +] and [
온도내림
][Temp -] buttons for 3 seconds.
▶
You will hear ring and the Lock indicator( ) will appear on the indoor unit display.
▶
Once Lock is set, you cannot control the air conditioner with the control panel but
you can only control it with the remote controller.
▶
To Unlock the control panel, press the [
온도올림
][Temp +] and [
온도내림
][Temp -]
buttons again for 3 seconds.
Whether the air conditioner is switched on or off, you cannot control the air conditioner with the control panel if this function
is set.
@AP-SM@@2 ���_IB_33503A(4)_E_110829.indd 9 2011-08-29 �� 3:31:49
10
Using the air conditioner with the control panel
To turn off the air conditioner, press the [
운전/정지
][Power] button again.
STOP
1. Press the [
운전/정지
][Power] button on the indoor unit control panel.
▶
You will hear a ringing sound and the air conditioner will operate in the most
recent operation mode used or Auto mode.
3. Press the [
바람세기
][Fans speed adjustment] button to adjust the fan speed.
▶
Each time you press the [
바람세기
][Fan speed adjustment] button, the fan speed
will change in order of
(Low)
▷
(Medium)
▷
(High)
▷
(Auto).
4. Press the [
운전선택
][Mode] button to select operation mode.
▶
You can select operation mode you want by pressing the [
운전선택
][Mode] button.
Each time you press the [
운전선택
][Mode] button, the mode will change in order
of Auto, Cool, Dry and Fan.
(Heating operation applicable model: AP-SM
2 Series)
▶
Press the [
스피드
][Speed] button to select Speed mode.
▶
Press [
상하바람
][Air swing(Up/Down)] button to adjust air flow direction.
▶
Press [
좌우바람
][Air swing(Left/Right)] button to adjust air flow direction.
2. Press the [
온도올림
][Temp +] or [
온도내림
][Temp -] button to adjust the temperature.
▶
You can increase/decrease the temperature by 1°C.
You can control the air conditioner without the remote controller.
@AP-SM@@2 ���_IB_33503A(4)_E_110829.indd 10 2011-08-29 �� 3:31:49
11
Checking the remote controller
Power
Turn on/off the air conditioner
Purifying button
Set the virus doctor function
Speed/ Long button
Set quick and powerful cooling or long
operation
Temp + -
Increase/Decrease the
temperature b y 1˚C
This button is not functional.
Off Timer
Set the Off Timer on
Time Up
Increase the time when setting the timer
On Timer
Set the On Timer on
Air swing(Left/Right)
Activate/Deactivate air flow blade
movement automatically right and left
Mode
Set one of the 4 operation modes
Air swing(Up/Down)
Activate/Deactivate air flow blade
movement automatically up and down
Time Down
Decrease the time when setting the timer
Remote controller display
Fan Λ ν
Turn on/off the air conditioner
Set
Set the timer
Cancel
Cancel the timer
Remote controller button
The functions may be different depending on the model.
▶
You can activate the air conditioner by pointing the remote controller away from it. When using the remote controller,
always point it directly at the air conditioner.
▶
When you press the button, a short ring will sound and a transmit indicator( )appears on the remote controller display.
●
Heater, Smart Saver functions are not supported by this model.
●
Remote controller will remember the most recent temperature setting if you turn off the air conditioner
and then turn it on again.
@AP-SM@@2 ���_IB_33503A(4)_E_110829.indd 11 2011-08-29 �� 3:31:49
12
The functions may be different depending on the model.
▶
You can activate the air conditioner by pointing the remote controller away from it. When using the remote controller,
always point it directly at the air conditioner.
▶
When you press the button, a short ring will sound and a transmit indicator( )appears on the remote controller display.
Remote controller display
●
The signal may not be received well of electronic lighting style fluorescent lampssuch as inverter
fluorescent lamps are in the same space.
●
If other electrical products operate by the remote controller, call your nearest contact center.
Changing the batteries
If low battery indicator( ) is on the
remote control display, change batteries.
It needs two 1.5V batteries.(AAA type).
Installing the batteries
1. Push the lever as arrow indicates on the rear side
of the remote controller and pull up.
2. Insert two AAA batteries.
▶
Check and match the “+” and “-” signs accordingly.
3. Close the cover by place it back to its original
position.
▶
You should hear click sound when
the cover is locked
properly.
Storing the remote controller
When not using the remote controller for a long
term, remove the batteries and store the remote
controller inside the remote controller case.
●
Be careful not to get the remote controller wet.
※
For AP-HM
2 series model, even though (
난방
)(Heat) will be displayed on the remote controller and there
will be ‘beep’ sound, the heating operation will not perform. After you select (
난방
)(Heat) and turn off and
on the air conditioner, it will operate as (
자동
)(Auto) and the remote controller is displayed as (
난방
)(Heat).
Change the operation mode of the remote controller.
Operation mode indicator
Fan speed indicator
Auto
Low
Medium
High
Transmit indicator
Low battery indicator
Set temperature/time
indicator
Air swing indicator
On/Off timer indicator
CAUTION
@AP-SM@@2 ���_IB_33503A(4)_E_110829.indd 12 2011-08-29 �� 3:31:50
13
Basic operation
Basic operation is the operation mode that can be selected by pressing the [
운전선택
](Mode) button.
Auto [
자동
]
When setting the desired temperature of the air conditioner for your fresh environment, the operation mode will
automatically change to [
자동
(
냉방
)]Auto(Cool) or [
자동
(
난방
)]Auto(Heat) mode according to the desired temperature
and current temperature and control the fan speed in Auto mode.
Cool [
냉방
]
In Cool mode, indoor temperature, fan speed, and air flow direction can be adjusted at your desire to cool your indoor
room.
Dry [
제습
]
In Dry mode, indoor humidity can be removed efficiently to refresh the humid indoor room.
▶
Switching the outdoor unit on or off will be repeated according to the temperature difference between current
temperature and the desired temperature.
Fan [
송풍
]
In Fan mode, the breeze will be generated just like the electric fan to provide natural indoor environment.
Heat [
난방
]
(AP-SM
2 Series
)
In heat mode, the indoor temperature, fan speed, and air flow direction can be adjusted at your desire to warm your
indoor room.
▶
After the current temperature reaches the desired temperature or just after starting the Heat mode, the fan may not
be generated to prevent cool breeze from coming out.
▶
Defrost display : When removing frost at the outdoor unit in the Heat mode, the (Defrost) will be displayed
on the control display of the air conditioner and it will be turned off after removing the frost. (When
removing the frost during the defrost operation in Heat mode, steam may be generated and the warm
breeze may not come out from the indoor unit.)
@AP-SM@@2 ���_IB_33503A(4)_E_110829.indd 13 2011-08-29 �� 3:31:50
14
Press
button to start the operation of the air conditioner.
Press
button to select the basic operation.
Press the
button and choose desired fan speed.
Auto (
자동)
(
Auto
)
Cool (
냉방)
(
Auto
),
(
Low
),
(
Medium
),
(
High
)
Dry (
제습)
(
Auto
)
Fan (
송풍)
(
Low
),
(
Medium
),
(
High
)
Heat (
난방)
(
Auto
),
(
Low
),
(
Medium
),
(
High
)
Press the
button to adjust the desired temperature.
Auto (
자동)
You can adjust the desired temperature by 1
℃
within the range of 18
℃~
30
℃.
Cool (
냉방)
You can adjust the desired temperature by 1
℃
within the range of 18
℃~
30
℃.
Dry (
제습)
You can adjust the desired temperature by 1
℃
within the range of 18
℃~
30
℃.
Fan (
송풍)
Desired temperature cannot be adjusted.
Heat (
난방)
You can adjust the desired temperature by 1
℃
within the range of 16
℃~
30
℃.
※
When selecting the heat mode, Heater
( )
will be displayed on the remote controller, but the air conditioner will not
perform the heating operation.
(난방)(Heat)
will be displayed on the remote controller and there will be ‘beep’ sound, but
the air conditioner will not perform the heating operation with the AP-HM
2 series model.
@AP-SM@@2 ���_IB_33503A(4)_E_110829.indd 14 2011-08-29 �� 3:31:50
15
Speed operation
Long operation
Speed operation function provides you with quick and powerful cooling or heating.
Remote operation function provides cooling and heating to even long area.
Press the button to select the speed operation.
Press
button twice to select the long operation.
▶
will be displayed on the remote controller display and the speed operation
will operate for 30minutes.
▶
will be displayed on the remote controller display and the long operation
will start.
Cancel
Press the [
스피드/원거리
](Speed/Long) button two more times.
Cancel
Press the [
스피드/원거리
](Speed/Long) button one more time.
●
Speed operation can be selected in all basic operation modes, but
if you select the speed operation in Dry/Fan mode, the operation
mode will change to [
자동(스피드
)] Auto(Speed).
●
When selecting the speed operation, the vertical air flow blade will
go downwards and vertical or horizontal adjustment of air flow
direction is available.
●
Speed operation and Long operation cannot be selected at the same
time.
●
Desired temperature and fan speed cannot be adjusted.
●
Long operation can be selected in all basic modes but if you select
the long operation in dry/fan mode, the operation mode will change
to [
자동(원거리)
]Auto(Long).
●
When selecting the long operation, only horizontal adjustment of air
flow direction is available.
●
Long operation and speed operation cannot be selected at the same
time.
@AP-SM@@2 ���_IB_33503A(4)_E_110829.indd 15 2011-08-29 �� 3:31:51
16
Purifying operation
You can adjust air flow direction vertically and horizontally.
Press
button or
button to move the air flow blades vertically or horizontally.
▶
To fix the air flow direction, press the [
상하바람
]
(Air swing Up/Down) button or [
좌우바람
] (Air
swing Left/Right) button one more time when the
air flow blade reaches your desired position. Then
the air flow blade movement will stop.
Selecting the air flow direction
When selecting [
상하바람
]
(Air swing Up/Down)
When the air conditioner is
switched off
Purifying operation will get rid of the active oxygen and provide fresh air.
Press the
button to select the purifying operation.
When the air conditioner is switched off
▶
Purifying operation begins.
▶
Press the button once again to cancel the operation.
When the air conditioner is switched on
▶
Purifying operation will be canceled.
▶
Press the button once again to start the operation additionally.
●
By pressing the [
청정
](Purifying), purifying operation can be selected
additionally in all basic modes.
●
There will not be any changes in power consumption or operation noise
even if you set the Clean mode to operate simultaneously with other
mode.
●
During the purifying operation, selecting other operations is available by
pressing the [
운전/정지
](Power) [
운전선택
](Mode) button.
●
You can press the [
운전/정지
](Power) button to stop the operation if the
Clean mode is operating simultaneously with other mode.
●
If the Clean mode is operating alone, you can press the [
청정
](Clean)
button to stop the operation.
When selecting [
좌우바람
]
(Air swing Left/Right)
When the air conditioner is
switched on
@AP-SM@@2 ���_IB_33503A(4)_E_110829.indd 16 2011-08-29 �� 3:31:51
17
Setting on timer when the air conditioner is switched off/
Setting off timer when the air conditioner is switched on
Functions that can be selected additionally with on timer setting
Applicable model: AP-SM
2 series
You can select [
자동
](Auto)
▷[냉방
](Cool)
▷[제습
](Dry)
▷[송풍
](Fan)
▷[난방
](Heat).
Applicable model: AP-HM
2 series
You can select [
자동
](Auto)
▷[냉방
](Cool)
▷[제습
](Dry)
▷[송풍
](Fan).
When setting the mode as [
난방
](Heat), the air conditioner will start
as[Auto] (
자동).
Temperature adjustment is available only with Auto/Cool/Dry/Heat mode.
You can turn the air conditioner on or off at your desired time.
1. Press the [
켜짐예약
](On timer) button or [
꺼짐예약
](Off timer) button.
▶
[
켜짐
](On) or [
꺼짐
](Off) display will blink.
2. Press the [
시간올림
](Time up) button or [
시간내림
](Time down) button and set
the off time.
▶
Time will be set in 30 minute units from 30min to 3 hours and hourly units
from 3hours to 24 hours.
▶
On/Off time can be set from minimum 30min to maximum 24 hours.
3. Complete the time setting by pressing the [
확인
](Set )button.
▶
After [
켜짐
](On) or [
꺼짐
](Off) blinking stops, the set time will be displayed
with the [
켜짐
](on) or [
꺼짐
](off) display.
▶
[
예약
](Timer setting) will be displayed on the control display of the air
conditioner and the setting on or off time will be completed.
▶
If you do not press the [
확인
](Set) button within 10 seconds, setting on or off
time will be canceled. Therefore, you should confirm the [
켜짐
](On),
[
꺼짐
](Off) or [
예약
](Timer setting) display on the control display of the
air conditioner.
●
After the set up while the unit is off, approximately after 10 seconds,
all the other indicators will be gone except the (
켜짐
) indicator and
remaining time.
●
After setting the on timer function with the remote controller and
pressing the [
운전/정지
] (Power) button on the control panel of the
air conditioner, the on time display on the air conditioner will go out.
However, the on or off timer function will work with your remote
controller.
Setting On timer
Setting Off timer
Cancel
Press the [
취소
](Cancel) button.
On/Off timer function
@AP-SM@@2 ���_IB_33503A(4)_E_110829.indd 17 2011-08-29 �� 3:31:52
18
●
On timer and Off timer setting time should be different from each other.
●
If On and Off timer are set at the same time and you press the
[취소]
(Cancel) or
[운전/정지](
Power)
button, On and Off timer will be canceled.
Combining On Timer and Off Timer
If the air conditioner is Off If the air conditioner is On
Preset time on On timer is shorter than Off timer
Ex) On timer : 3 hours, Off timer : 5 hours
- The air conditioner will turn on after 3 hours from the
moment you have set the timer.
Your air conditioner will remain on for 2 hours and
then turn off automatically.
Preset time on On timer is longer than Off timer
Ex) On timer : 3 hours, Off timer : 1 hour
- The air conditioner will be turned off after 1 hour from
the moment you have set the timer.
After 2 hours, your air conditioner will turn on.
@AP-SM@@2 ���_IB_33503A(4)_E_110829.indd 18 2011-08-29 �� 3:31:52
19
●
If it is too difficult to clean the outdoor unit heat exchanger
on your own, contact service center.
●
Be careful with the sharp edges on the outdoor unit
heat exchanger.
●
Make sure to turn off the circuit breaker when cleaning the air conditioner.
●
If it is difficult to clean the indoor unit heat exchanger on
your own, contact service center.
●
Depending on the usage environment(restaurant, hair salon
etc.), odor may be generated. Prevent the odor by cleaning
the air filter or performing fan operation while ventilating
your room. If you have a problem with the odor, contact a
service center.
●
Do not clean the control panel with alkaline detergent.
●
Do not clean the surface with sulfuric acid, hydrochloric acid
or organic solvent (thinner, kerosene, acetone) or attach
stickers. It may damage the surface of the unit.
●
When cleaning the heat exchanger, open the heat exchanger
cleaning section cover and clean the heat exchanger.
Carefully clean the heat exchanger as the surface of the heat
exchanger is sharp.
Cleaning the outdoor unit heat exchanger
Cleaning the indoor unit
Heat exchanger
(Illustration may differ slightly
depending on the models.)
Cleaning the air conditioner
CAUTION
Wipe the surface of the unit with a slightly wet or dry cloth when needed.
Brush away the dust on the narrow gap of air conditioner.
When dust accumulates on the heat exchanger, it may decrease cooling
(heating) performance. Therefore, clean it regularly.
Spray water to clean the dust.
CAUTION
CAUTION
@AP-SM@@2 ���_IB_33503A(4)_E_110829.indd 19 2011-08-29 �� 3:31:52
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
