For your safety and preventing injury to you and others,
please read safety precautions carefully and use the product
properly.
ARN-SE61 Series
Split Type
DB98-31052A(7)
THIS IS FOR KOREAN UNIT STANDARD ONLY.
WE DO NOT GUARANTEE THE QUALITY FROM ABROAD.
Samsung Hauzen
Wall-mounted
Air Conditioner
User manual
@AR-CE61���_IB_31052-7(100407).indd 42 2010-05-11 �� 6:42:35
1
Features
●
DNA filter : Effectively eliminates carcinogenic gas(PAH) which is
generated when smoking or cooking at home.
●
Allergy clinic filter : Eliminates allergens such as pollen, dust mites etc.
●
Clean mode : - Energy consumption and the operation noise will
decrease since Clean mode can be operated
individually.
- Your air conditioner is equipped with Virus doctor,
which will eliminate harmful air contaminants and neu-
tralize active oxygen within the air to make your indoor
healthy and clean.
Efficient cleaning function
good'sleep mode allows you to set a comfortable sleep temperature
while saving energy and having sound sleep.
good'sleep function
Smart saving function raises the effectiveness of air conditioner by
maintaining the indoor cool and saving the electricity bill.
Smart saving function
Luxurious and stylish design makes the indoor atmosphere bright.
High quality design
Luxurious and stylish design makes the indoor atmosphere bright.
Smart remote controller
Please check the installation license
when installing your air conditioner
Only our qualified technician who has license can install your air
conditioner. We are not responsible for problems arising from the
installation of unlicensed person.
@AR-CE61���_IB_31052-7(100407).indd 1 2010-05-11 �� 6:46:44
2
Contents
To use the product more effectively, check this.
Explanations of terms.
Refer to the applicable page.
Safety precautions
..................................................................
3
Checking before use
...............................................................
8
Viewing the parts
....................................................................
10
Checking the remote controller
...............................................
11
Comfort Care
..........................................................................
13
Cool
........................................................................................
14
Dry
.........................................................................................
15
Clean
......................................................................................
16
Heat
.......................................................................................
17
Smart saver
............................................................................
18
I want to save electricity bill
Speed
.....................................................................................
19
I want to make the indoor cool/warm quickly
Adjusting air flow
....................................................................
20
I want to adjust the air flow as I want
good'sleep
.............................................................................
21
I want to sleep comfortably in hot summer
On/Off Timer
...........................................................................
23
I want the air conditioner turn on/off at a designated time
Evaporator clean
.....................................................................
26
I want to suppress mold generation by removing the moisture
Silence
....................................................................................
27
I want to reduce noise during the operation
Using the air conditioner with control panel
.............................
28
I want to operate the air conditioner without remote controller
Tips
........................................................................................
29
Cleaning and maintaining
........................................................
30
Keeping
..................................................................................
35
Troubleshooting
......................................................................
36
Product disposal
.....................................................................
38
Specifications
.........................................................................
39
Preparation
Basic function
Application
Others
@AR-CE61���_IB_31052-7(100407).indd 2 2010-05-11 �� 6:46:44
3
Check and follow below
for your safety
These warning signs are here to prevent injury to you and
others. Please follow them carefully.
Hazards or unsafe practices that may result in severe personal injury or death.
Hazards or unsafe practices that may result in minor personal injury or property damage.
Follow directions.
Do NOT attempt.
Make sure the machine is grounded to prevent electric shock.
Unplug the power plug from the wall socket.
Do NOT disassemble.
Installation
Plug the power cord into a wall socket with the power specifications of the
product or higher and use the socket for this appliance only.
In addition, do not use an extension cord.
►
Sharing a wall socket with other appliances using a power strip or extending the
power cord may result in electric shock or fire.
►
Do not use an electric transformer. It may result in electric shock or fire.
►
If the voltage/frequency/rated current condition is different, it may cause fire.
The installation of this appliance must be performed by a qualified technician or
service company.
►
Failing to do so may result in electric shock, fire, explosion, problems with the
product, or injury.
Install a switch and circuit breaker dedicated to the air conditioner.
►
Failing to do so may result in electric shock or fire.
Never install the outdoor unit in a location such as on a high external wall where
it could fall.
►
If the outdoor unit falls, it may result in injury, death or property damage.
Fix the outdoor unit firmly so that the electric part of the outdoor unit is not
exposed.
►
Failing to do so may result in electric shock or fire.
Do not install this appliance near a heater or inflammable material, in a humid,
oily or dusty area, in a location exposed to direct sunlight and water(rain drops)
and in a location where gas may leak.
►
This may result in electric shock or fire.
This appliance must be properly grounded. Do not ground the appliance to a
gas pipe, plastic water pipe, or telephone line.
►
Failing to do so may result in electric shock, fire, an explosion, or other problems
with the product.
►
Never plug the power cord into a socket that is not grounded correctly.
@AR-CE61���_IB_31052-7(100407).indd 3 2010-05-11 �� 6:46:44
4
Safety precautions
This appliance should be positioned in such a way that it is accessible to the
power plug.
►
Failing to do so may result in electric shock or fire due to electric leakage.
Install your appliance on a level and hard floor that can support its weight.
►
Failing to do so may result in abnormal vibrations, noise, or problems with the
product.
When installing the outdoor unit on the roadside, install it above 2m or where
the heat coming out from the outdoor unit cannot contact the passensers.
►
This is a Regulation for Facility in Building. You must follow this.
Install the draining hose properly so that water is drained correctly.
►
Failing to do so may result in water overflowing and property damage.
When installing the outdoor unit, make sure to connect the draining hose so
that draining is performed correctly.
►
The water generated during the heating operation by the outdoor unit may over
flow an d result in property damage. In particular, in winter, if a block of ice falls,
it may result in injury, death or property damage.
Remove all foreign substances such as dust or water from the power plug
terminals and contact points using a dry cloth on a regular basis.
►
Unplug the power plug and clean it with a dry cloth.
►
Failing to do so may result in electric shock or fire.
Plug the power plug into the wall socket in the right direction so that the cord
runs towards the floor.
►
If you plug the power plug into the socket in the opposite direction, the electric
wires within the cable may be damaged and this may result in electric shock or fire.
When the appliance or power plug or power cord is damaged, contact your
nearest service center.
Plug the power plug into the wall socket firmly. Do not use a damaged power
plug, damaged power cord or loose wall socket.
►
This may result in electric shock or fire.
Do not pull the power cord, when unplugging the power plug.
►
Unplug the power plug by holding the plug.
►
Failing to do so may result in electric shock or fire.
Do not hook the power cord over a metal object, place a heavy object on the
power cord, insert the power cord between objects, or push the power cord
into the space behind the appliance.
►
This may result in electric shock or fire.
Hazards or unsafe practices that may result in severe personal injury or death.
Hazards or unsafe practices that may result in minor personal injury or property damage.
Power supply
Installation
When not using the air conditioner for a long period of time or during a thunder/
lightning storm, cut the power at the circuit breaker.
►
Failing to do so may result in electric shock or fire.
Power supply
Preparation
@AR-CE61���_IB_31052-7(100407).indd 4 2010-05-11 �� 6:46:44
5
If the appliance is flooded, please contact your nearest service center.
If the appliance generates a strange noise, a burning smell or smoke, unplug
the power plug immediately and contact your nearest service center.
►
Failing to do so may result in electric shock or fire.
In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately
without touching the power plug. Do not touch the appliance or power cord.
►
Do not use a ventilating fan.
►
A spark may result in an explosion or fire.
To reinstall the air conditioner, please contact your nearest service center.
►
Failing to do so may result in problems with the product, water leakage,
electric shock, or fire.
►
A delivery service for the product is not provided. If you reinstall the product in
another location, additional construction expenses and an installation fee will be
charged.
►
Especially, when you wish to install the product in an unusual location such as
in an industrial area or near the seaside where it is exposed to the salt in the air,
please contact your nearest service center.
Do not touch the power plug or the circuit breaker with wet hands.
►
This may result in electric shock.
Do not unplug the power plug or turn the air conditioner off with the circuit
breaker while it is operating.
►
Plugging the power plug into the wall outlet or turning the air conditioner on
from the circuit breaker may cause a spark and result in electric shock or fire.
After unpacking the air conditioner, keep all packaging materials well out of the
reach of children, as packaging materials can be dangerous to children.
►
If a child places a bag over its head, it may result in suffocation.
Do not insert your fingers or foreign substances into the air inlet/outlet of the air
conditioner.
►
Take special care that children do not injure themselves by inserting their fingers
into the product.
Do not touch the front panel with your hands or fingers during the heating operation.
►
This may result in electric shock or burns.
Do not insert your fingers or foreign substances into the outlet when the air
conditioner is operating or the front panel is closing.
►
Take special care that children do not injure themselves by inserting their fingers
into the product.
Do not apply a strong impact on the appliance or pull the appliance.
►
Failing to do so may result in fire, problems with the product, or injury.
Do not place an object near the outdoor unit that allows children to climb onto the machine.
►
This may result in children seriously injuring themselves.
Do not use this air conditioner for long periods of time in badly ventilated
locations or near infirm persons.
►
Since this may be dangerous due to a lack of oxygen, open a window at least
once an hour.
Usage
Check and follow below
for your safety
These warning signs are here to prevent injury to you and
others. Please follow them carefully.
@AR-CE61���_IB_31052-7(100407).indd 5 2010-05-11 �� 6:46:44
6
Safety precautions
Do not place objects or devices under the indoor unit.
►
Water dripping from the indoor unit may result in fire or property damage.
Check that the installation frame of the outdoor unit is not broken at least once a year.
►
Failing to do so may result in injury, death or property damage.
Do not stand on top of the appliance or place objects (such as laundry, lighted
candles, lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.
►
This may result in electric shock, fire, problems with the product, or injury.
Do not operate the appliance with wet hands.
►
This may result in electric shock.
Do not spray volatile material such as insecticide onto the surface of the appliance.
►
As well as being harmful to humans, it may also result in electric shock,
fire or problems with the product.
Do not drink the water from the air conditioner.
►
The water may be harmful to humans.
Do not apply a strong impact to the remote control and do not disassemble the
remote control.
Do not touch the pipes connected with the product.
►
This may result in burns or injury.
Do not use this air conditioner to preserve precision equipment, food, animals,
plants or cosmetics, or for any other unusual purposes.
►
This may result in property damage.
Avoid directly exposing humans, animals or plants from the air flow from the air
conditioner for long periods of time.
►
This may result in harm to humans, animals or plants.
Usage
If any foreign substance such as water has entered the appliance, cut the power
by unplugging the power plug and turning the circuit breaker off and then
contact your nearest service center.
►
Failing to do so may result in electric shock or fire.
Do not attempt to repair, disassemble, or modify the appliance yourself.
►
Do not use any fuse (such as cooper, steel wire, etc.)other than the standard fuse.
►
Failing to do so may result in electric shock, fire, problems with the product, or injury.
Usage
Preparation
@AR-CE61���_IB_31052-7(100407).indd 6 2010-05-11 �� 6:46:44
7
Safety precautions
Do not use benzene, thinner, alcohol or acetone to clean the appliance.
►
This may result in discoloration, deformation, damage, electric shock or fire.
Before cleaning or performing maintenance, unplug the air conditioner from the
wall socket and wait until the fan stops.
►
Failing to do so may result in electric shock or fire.
Take care when cleaning the surface of the heat exchanger of the outdoor unit
since it has sharp edges.
►
To avoid cutting your fingers, wear thick cotton gloves when cleaning it.
Do not clean the inside of the air conditioner by yourself.
►
For cleaning inside the appliance, contact your nearest service center.
►
When cleaning the internal filter, refer to the descriptions in the ‘Cleaning and
maintaining the air conditioner’ section.
►
Failure to do may result in damage, electric shock or fire.
Cleaning
Cleaning
These warning signs are here to prevent injury to you and
others. Please follow them carefully.
Check and follow below
for your safety
Preparation
Take safety inspection for old air conditioners!
○
Big or strange sound
○
Strange smell and smoke
during the operation
○
ELB or fuse is frequently cut
○
Water leakage from indoor unit
○
Other strange symptoms
○
Turn off the air conditioner and
disconnect the plug.
○
Contact the service center
or retail store and take safety
inspection.
◎
Do not repair the air conditioner
on your own discretion.
Safety
inspection
Do you
have these
symptoms?
Stop
the
operation
@AR-CE61���_IB_31052-7(100407).indd 7 2010-05-11 �� 6:46:44
8
■
Barriers near the outdoor unit
Take away if there are covers or barriers.
It may cause product failure, and poor performance in
cooling(heating) by blocking air circulation.
Auxiliary power switch (NFB, ELB, etc.)
●
Auxiliary power switch is not included in the package. Purchase and install it
separately.
●
Auxiliary power switch is a device to prevent over-current or short circuit.
Install it separately near the indoor unit and turn it off when cleaning or
when you don’t use it for long time.
●
If NFB or ELB has already installed in the switch box of the building,
you don’t need to install auxiliary power switch.
■
Auxiliary power switch
Turn on the auxiliary power switch which is installed separately.
(Only applicable for outdoor power method)
■
Power plug and wall socket
Connect the plug to 220V wall socket.
(Only applicable for indoor power method)
To use the air conditioner effectively,
check the following in advance.
Check below before using
the air conditioner
Checking before use
Preparation
@AR-CE61���_IB_31052-7(100407).indd 8 2010-05-11 �� 6:46:45
99
Checking before use
Check below before using
the air conditioner
To use the air conditioner effectively,
check the following in advance.
► If indoor/outdoor temperature is lower than the regular temperature
(Indoor temp.: 20˚C, Outdoor temp.: 7˚C) or install condition is different from the
general condition(Standard piping more than 5m, installation location or insulation),
the unit will operate normally but heating capacity may decrease. In this case,
use additional heating apparatus.
►
Indoor units which are connected to 1 outdoor unit cannot operate mixed operation.
In this case, press the
[운전선택](Mode)
button and select same operation mode.
※ Mixed operation means selecting different operation modes in both indoor units
which are connected to 1 outdoor unit.
■ Heating capacity by outdoor temperature
Heating capacity
100% of regular
capacity
70% of regular
capacity
Outdoor
temperature
■
Operation ranges
The table below indicates the temperature and humidity ranges the air conditioner
can be operated within. Refer to the table for efficient use.
MODE
Indoor
temperature
Outdoor
temperature
Indoor humidity
Cool
21˚C ~ 32˚C 21˚C ~ 43˚C 80% or less
Dry
21˚C ~ 30˚C 21˚C ~ 43˚C -
Heat
0˚C ~ 30˚C -5˚C ~ 24˚C -
►
If the air conditioner operates in cooling mode for long period of time in high humidity
area, dew may be formed.
►
If the outdoor temperature goes down to -5°C, heating capacity may decrease as
much as 60%~70% of specified capacity according to the using conditions.
Preparation
@AR-CE61���_IB_31052-7(100407).indd 9 2010-05-11 �� 6:46:45
10
Viewing the parts
Air flow blade(Vertical)
Air flow control
lever(Horizontal)
Panel
Power button
Temperature
sensor part
Air inlet
Air enters through
here
Virus doctor
Eliminates active oxygen
Indicators and remote control receiver
Remote control receiver
Cleaning
indicator
Operation(White)/
Filter clean reminder(Green)
Timer/good’sleep indicatorDefrost indicator
Here are the names of
each part
※ Your air conditioner may slightly look different from illustration shown above depending on your model.
■
Main parts
Preparation
@AR-CE61���_IB_31052-7(100407).indd 10 2010-05-11 �� 6:46:45
11
●
Be careful not to get the remote controller wet.
How to use remote controller
●
Point the remote controller towards the remote
control sensor of the unit.
●
When properly pressing the button on the remote
controller, you will hear beep sound from the unit.
●
The signal may not be received well of electronic
lighting style fluorescent lamps such as inverter
fluorescent lamps are in the same space.
●
If other electrical products operate by the remote
controller, call your nearest contact center.
Operation mode indicator
Displays current operation mode
Fan speed indicator
Displays fan speed
Vertical swing indicator
Displays the air flow(Vertical)
Desired temp./Timer/
good'sleep indicator
Displays desired temperature,
On/Off timer, good'sleep setting status
Transmit indicator/
Low battery indicator
Mute function
●
I f you want to mute the ringing sound, press the
[확인/취소]
(Set/Cancel) button for 3 seconds
while On Timer/ Off Timer or good'sleep mode is
not set. If you press the
[확인/취소]
(Set/Cancel)
button again for 3 seconds, ringing will sound
again.
Here are remote controller
instructions
CAUTION
@AR-CE61���_IB_31052-7(100407).indd 11 2010-05-11 �� 6:46:45
12
■
Changing the batteries
If low battery indicator( ) is on the
remote control display, change batteries.
It needs two 1.5V batteries.(AAA type)
■
Button part
Power
Turn On/Off the air conditioner
Fan ◁▷
Adjust how much air flows
through the air conditioner
with the 5 different fans
speeds such as Auto/Low/
Medium/High/Turbo
Temp △▽
Adjust the desired temperature
Mode
Select one of the
5 operating modes
Clean
Select Clean mode
Speed
Cool or heat your room quickly
Smart saver
Save electricity bill while
maintaining coolness
Vertical swing button
Adjust the air flow vertically
■
Button part
On Timer
Set the On Timer on
Off Timer
Set the Off Timer on
Time▲▼
Adjust the time for timer/
good’sleep function
Set/Cancel
Set/Cancel the timer
or good’sleep mode,
Select mute function
good'sleep
Set the good’sleep mode on
Evap. Clean
Evaporator clean function-
Dry inside of the indoor unit to
get rid of odor
Filter Reset
Initiates filter using time
after cleaning the filter
■
Installing the batteries
Push the lever as arrow indicates
on the rear side of the remote
controller and pull up.
1
Insert two AAA batteries.
► Check and match the “+”
and “-” signs accordingly.
2
Close the cover by placing
it back to its original
position.
► You should hear click
sound when the
cover is locked
properly.
3
Silence
Active/Deactive the silence
function to operate the air
conditioner quietly
Preparation
Checking the rermote controller
@AR-CE61���_IB_31052-7(100407).indd 12 2010-05-11 �� 6:46:45
Comfort care
13
Fan speed
If you adjust the desired temperature,
operation mode will change to Cool mode.
Temperature
● Desired temperature :
Means the temperature you want.
Desired temperature should be
lower than surrounding
temperature for cooling operation.
● Auto : Adjusts fan speed depending on the indoor
temperature.
● If the indoor/outdoor temperature is low(Indoor temp.:
Less than 21°C/Outdoor temp.: Less than 18°C) when
the Comfort care mode is initiated, the air conditioner will
operate in Heat mode automatically.
● You cannot select vertical swing in Comfort care mode.
You don’t need to control because it will be selected
automatically.
Air flow
I want fresh air depending
on the indoor environments
Basic
function
In comfort care mode, the air conditioner will automatically set the operation mode to
Cool, Dry or Clean mode to provide refreshing and comfortable indoor air.
Turn on the air conditioner by pressing the (Power) button.
The air conditioner starts operation in Comfort care mode.
If not, select Comfort care by pressing the
(Mode) button.
(Auto) is selected automatically. If you adjust fan
speed, operation mode will change to Cool mode.
● In Comfort care mode, the air conditioner will select the most
appropriate air flow using the temperature sensor.
- Temperature sensor: Detects the indoor temperature
● Comfort care will initially operate in Cool mode for first 10 minutes
and change operation mode depending on the indoor temperature
and humidity.
Features
@AR-CE61���_IB_31052-7(100407).indd 13 2010-05-11 �� 6:46:46
14
Cool
Temperature
Fan speed
You can set the air flow in vertical direction by
pressing the
[상하바람]
(Vertical swing) button.
For horizontal air flow, you can set the air blades
manually with your hands.
20
Air flow
I want to cool the indoor
Basic
function
You can set the desired temperature between
the range of 16˚C~30˚C by pressing the
[온도올림]/[온도내림] (Temp△▽) button.
The temperature increases/decreases by 1˚C.
You can select the fan speed from
(Turbo), (High), (Med), (Low), (Auto)
by the pressing [바람
]/[바람 ] (Fan◁▷) button.
Cool mode is the most frequently used operation. You can adjust the temperature,
fan spped, and air flow as you want.
Firstly,
Press the (Power) button and select Cool mode by
pressing the
(Mode) button.
● 3 minutes delay function :
If you operate the air conditioner after stopping
cooling operation, cool air will not come out about
3 minutes to protect compressor.
@AR-CE61���_IB_31052-7(100407).indd 14 2010-05-11 �� 6:46:46
15
Dry
Fan speed
Temperature
20
Air flow
I want to make the damp
indoor air comfortable
Basic
function
The air conditioner in Dry mode acts like a dehumidifier by removing moisture from
the indoor air. Dry mode makes the air feel refreshing in a humid climate.
Firstly,
Press the (Power) button and select Dry mode
by pressing the
(Mode) button
.
You can set the desired temperature between
the range of 18˚C~30˚C by pressing the
[온도올림]/[온도내림](Temp△▽) button.
The temperature increases/decreases by 1˚C.
(Auto) is selected automatically.
You can set the air flow in vertical direction by
pressing the
[상하바람]
(Vertical swing) button.
For horizontal air flow, you can set the air blades
manually with your hands.
●
The outdoor unit may repeatedly turn on/off depending
on current temperature and humidity.
@AR-CE61���_IB_31052-7(100407).indd 15 2010-05-11 �� 6:46:46
16
Clean
Temperature
I want to make the clean air
Clean mode will not only ventilate your room but the air conditioner will also
eliminate active oxygen to make the indoor air more refreshing.
Firstly,
Press the (Power) button and select Clean mode
by pressing the
(Mode) button or (Clean) button.
Temperature adjustment is not available.
However, if you select Clean mode additionally in
Cool/Dry/Heat mode, you can adjust the desired
temperature.
You can select the fan speed from
(Low), (Med), (High)
by pressing the [바람
]/[바람 ](Fan◁▷) button.
Fan speed
You can set the air flow in vertical direction by
pressing the
[상하바람]
(Vertical swing) button.
For horizontal air flow, you can set the air blades
manually with your hands.
Air flow
20
●
You can press the [청정](Clean) button to set the Clean mode when the air conditioner is on
or off.
●
When the air conditioner is operating in Cool/Dry/Heat mode, you can press the
[청정](Clean) button to operate the Clean mode simultaneously.
●
If you press the [청정](Clean) button in Comfort care mode, operation mode will change to
Cool (Clean) mode.
●
There will not be any changes in power consumption or operation noise even if you set the
Clean mode to operate simultaneously with other mode.
●
You can press the [운전/정지](Power) button to stop the operation if the Clean mode is
operating simultaneously with other mode.
●
If the Clean mode is operating alone, you can press the [청정](Clean) button to stop the
operation.
●
If you don't use the air conditioner for long period of time, dry the inside of the
air conditioner by operating in Clean mode for 3~4 hours.
35
Basic
function
@AR-CE61���_IB_31052-7(100407).indd 16 2010-05-11 �� 6:46:46
17
Temperature
Heat
The air conditioner heats as well as cools.
Warm your room with this versatile appliance in the cold winter.
Firstly,
Press the (Power) button and select Heat mode
by pressing the
(Mode) button.
I want to warm the indoor
You can set the desired temperature between
the range of 16˚C~30˚C by pressing the
[온도올림]/[온도내림](Temp△▽) button.
The temperature increases/decreases by 1˚C.
Fan speed
You can select the fan speed from
(Auto), (Low), (Med), (High)
the by pressing [바람
]/[바람 ](Fan◁▷) button.
20
Air flow
You can set the air flow in vertical direction by
pressing the
[상하바람]
(Vertical swing) button.
For horizontal air flow, you can set the air blades
manually with your hands.
Basic
function
● Just after you start the heating operation, warm air will
come out after for a while to avoid cold air from
coming out.
● Defrost indicator(
)
- When the air conditioner starts to remove the frost
which generated during heat mode, defrost indicator
will light up. After removing the frost, the indicator will
be turned off.
- Steam may generate in outdoor unit when removing the
frost during Heat mode.
- The air comes out for 3~4 minutes when you turned off
the air conditioner after operating in Heat mode.
@AR-CE61���_IB_31052-7(100407).indd 17 2010-05-11 �� 6:46:47
18
Smart saver
1
2
■
How to start Smart saver mode
3
Select Smart saver mode by pressing the
[절전](Smart saver) button.
▶ and vertical swing indicator will be displayed and
Smart saver mode will operate. The air flow blade moves
up and down.
▶ If you press the button once again, Smart saver mode
will be canceled and Cool mode will start. Even if you
cancel the Smart saver mode, vertical air swing will
remain.
■
Temperature/Fan speed Control
Air flow
You can set the air flow in vertical direction by pressing the
[상하바람](Vertical swing)
button. For horizontal air flow, you can
set the air blades manually with your hands.
20
I wan to save electricity bill
This function maintains the indoor Cool and save the
electricity bill at the same time.
Application
Press the
[운전/정지](Power)
button to turn
the air conditioner on.
►
Comfort care mode will start with beep sound.
Press the [운전/정지](Power) button again to stop the operation.
Select Cool mode by pressing the
[운전선택](Mode) button.
Each time you press the
[운전선택]
(Mode) button,
the mode will change in order of (Comfort care)
▷
(Cool)
▷
(Dry)
▷
(Clean)
▷
(Heat).
● Smart Saver function is only available in Cool
mode. If you select Smart Saver function in
Speed/Silence mode, Speed/Silence mode will be
canceled.
Temperature
You can adjust temperature in the range of 26°C~30°C by pressing the
[온도올림]/[온도내림](Temp△▽) button.
Fan speed
You can select from (Turbo), (High), (Medium), (Low),
(Auto) by pressing the [바람 ]/[바람 ](Fan◁▷) button.
@AR-CE61���_IB_31052-7(100407).indd 18 2010-05-11 �� 6:46:47
19
Speed
1
■
How to start Speed mode
I want to make the indoor
cool/warm quickly
Speed mode will be helpful to cool or heat your room quickly and
effectively by operating at the maximum fan speed for 30 minutes.
Application
Select Cool/Heat mode by pressing the
[운전선택](Mode)
button.
► Each time you press the
[운전선택]
(Mode) button,
the mode will change in order of (Comfort care
)▷
(Cool)
▷
(Dry)
▷
(Clean)
▷
(Heat).
Select Speed mode by pressing the
[스피드](Speed)
button.
►
will be displayed and speed mode will operate
for 30 minutes.
► To cancel the Speed mode, press the button once
again.
Press the
[운전/정지](Power)
button to turn
the air conditioner on.
►
Comfort care mode will start with beep sound.
Press the [운전/정지](Power) button again to stop the operation.
2
3
● You can select Speed mode in Cool/Heat mode
only.
● If you select Speed mode in Smart saver/Silence
mode, Smart saver/Silence mode will be canceled.
■
Temperature/Fan speed Control
Air flow
You can set the air flow in vertical direction by pressing the
[상하바람](Vertical swing)
button. For horizontal air flow, you can
set the air blades manually with your hands.
20
Temperature
Temperature adjustment is not available.
Fan speed
Fan speed is fixed as (Auto).
Fan speed control is not available.
@AR-CE61���_IB_31052-7(100407).indd 19 2010-05-11 �� 6:46:47
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Samsung AR18MC3ULGMXNA User manual
-
Samsung AR18HC5USUQNNA User manual
-
-
-
-
-
Samsung AQ13UGPN User manual
-
-
Samsung AQV18VBEN User manual
-
