ABB H8136xPx-A User manual

Category
Door intercom systems
Type
User manual

This manual is also suitable for

Pos: 2 /CNDEX/00 Title/00_Title -- H81 31xPx-A_H8136xPx-A @ 63\m od_1500619849797_0.docx @ 8 01103 @ @ 1
2TMD041700D0043 01.08.2017
Operating Instructions
ABB-Welcome IP
Mini video outdoor station
H8131xPx-A
H8136xPx-A
=== Ende der Liste für Textmarke Titel ===
Table of contents
Operating Instructions 2TMD041700D0043 2
Pos: 4 /DinA-4 -- Online -- standard c ontent/TOC/TOC -- international - 4 heading levels @ 57\mod_1488436026 244_15.docx @ 754287 @ @ 1
Table of c ontents
1 Notes on the instruction manual .................................................................................................................. 3
2 Safety .......................................................................................................................................................... 3
3 Intended use ................................................................................................................................................ 3
4 Environment ................................................................................................................................................ 4
4.1 ABB devices ..................................................................................................................................... 4
5 Product description ...................................................................................................................................... 5
5.1 Control elements .............................................................................................................................. 5
5.2 Feature ............................................................................................................................................. 6
5.3 Terminal description ......................................................................................................................... 7
5.4 Lock type and connection ................................................................................................................ 8
6 Technical data ............................................................................................................................................. 9
7 Mounting/Installation .................................................................................................................................. 10
7.1 Requirement for the electrician ...................................................................................................... 10
7.2 Mounting ........................................................................................................................................ 11
7.2.1 Surface-mounted installation .......................................................................................................... 12
7.2.2 Flush-mounted installation ............................................................................................................. 14
7.2.3 Cavity wall installation .................................................................................................................... 16
7.2.4 Dismantling and replacing the nameplate ...................................................................................... 18
7.2.5 Installation situations ...................................................................................................................... 19
8 Commissioning .......................................................................................................................................... 20
9 Operation ................................................................................................................................................... 21
9.1 Manage ID cards by mini outdoor station ...................................................................................... 21
Notice ................................................................................................................................................................. 23
=== Ende der Liste für Textm arke Inhaltsverzeichnis ===
Notes on the instruction manual
Operating Instructions 2TMD041700D0043 3
Pos: 7 /CNDEX/01 Heading/1. Head ing/Heading_Notes on the instru ction manual @ 56\mod_148756 7267846_15.docx @ 747508 @ 1 @ 1
1 Notes on the instruction manual
Pos: 8 /CNDEX/00 Warning/Txt _Notes on the instruction manual @ 62\m od_1496802824525_15.d ocx @ 786157 @ @ 1
Please read through this manual carefully and observe the information it contains. This will
assist you in preventing injuries and damage to property, and ensure both reliable operation and
a long service life for the device.
Please keep this manual in a safe place.
If you pass the device on, also pass on this manual along with it.
ABB accepts no liability for any failure to observe the instructions in this manual.
Pos: 10 /CNDEX/01 Heading/1. H eading/Heading_Safety @ 56\m od_1487743565314_15.doc x @ 749894 @ 1 @ 1
2 Safety
Pos: 11 /CNDEX/00 Warning/W arning_Electric voltage_Dan gerous currents @ 56\mod_148774 1007782_15.docx @ 749637 @ @ 1
Warning
Electric voltage!
Dangerous currents flow through the body when coming into direct or indirect
contact with live components.
This can result in electric shock, burns or even death.
Disconnect the mains power supply prior to installation and/or disassembly!
Permit work on the 110-240 V supply system to be performed only by
specialist staff!
Pos: 13 /CNDEX/01 Heading/1. Heading/Heading_Intended us e @ 56\mod_1487743332845_15. docx @ 749831 @ 1 @ 1
3 Intended use
Pos: 14 /CNDEX/02 Intended use/I ntended use_H8131xPx-A _H8136xPx-A_Mini OS @ 62\mod_ 1496209800158_15.docx @ 784 557 @ @ 1
Mini outdoor station with camera and transponder serves as an end device for Door Entry
System. It supports call other indoor stations, call guard units, unlock by ID cards and other
functions. It is suitable for flush-mounted installation or surface-mounted installation.
Pos: 15 /CNDEX/99 Auxiliary tools/+++ +++++++++++ page break ++++++++++++++ + @ 57\mod_1487814735946_0.doc x @ 750979 @ @ 1
Environment
Operating Instructions 2TMD041700D0043 4
Pos: 17 /CNDEX/01 Heading/1. H eading/Heading_Environm ent @ 62\mod_1496803173718 _15.docx @ 786200 @ 1 @ 1
4 Environment
Pos: 18 /CNDEX/00 Warning/Not e_Environment @ 62\mod_149 6803082333_15.docx @ 786178 @ @ 1
Consider the protection of the environment!
Used electric and electronic devices must not be disposed of with household
waste.
The device contains valuable raw materials that can be recycled. Therefore,
dispose of the device at the appropriate collecting facility.
Pos: 19 /CNDEX/01 Heading/1. 1 Heading/Heading_ABB devic es @ 62\mod_1496803248336_15. docx @ 786222 @ 2 @ 1
4.1 ABB devices
Pos: 20 /CNDEX/00 Warning/T xt_ABB devices_Environment @ 56\mod_1487743585555_15.d ocx @ 749915 @ 12 @ 1
All packaging materials and devices from ABB bear the markings and test seals for proper
disposal. Always dispose of the packing materials and electric devices and their components via
an authorized collection facility or disposal company.
ABB products meet the legal requirements, in particular the laws governing electronic and
electrical devices and the REACH ordinance.
(EU-Directive 2002/96/EG WEEE and 2002/95/EG RoHS)
(EU-REACH ordinance and law for the implementation of the ordinance (EG) No.1907/2006)
Pos: 21 /CNDEX/99 Auxiliary tools/+++ +++++++++++ page break ++++++++++++++ + @ 57\mod_1487814735946_0.doc x @ 750979 @ @ 1
Product description
Operating Instructions 2TMD041700D0043 5
Pos: 23 /CNDEX/01 Heading/1. Heading/Heading_Product descr iption @ 56\mod_148764418266 4_15.docx @ 747986 @ 1 @ 1
5 Product description
Pos: 24 /CNDEX/01 Heading/1. 1 Heading/Heading_Control elem ents @ 56\mod_1487747434664 _15.docx @ 750030 @ 2 @ 1
5.1 Control elements
Pos: 25 /CNDEX/03 Front overvi ew/Front overview_H8131xP x-A_H8136xPx-A_Mini OS @ 56\m od_1487644245434_15.docx @ 74 8007 @ @ 1
Fig. 1: Control elements
No Function
1 Light sensor
2 Infrared LED
3 Indicator LED (ring, call and door open)
4 Speaker and microphone integration
5 Pushbutton
6 Nameplate
Tab.1: Description
Pos: 26 /CNDEX/99 Auxiliary tools/+++ +++++++++++ page break ++++++++++++++ + @ 57\mod_1487814735946_0.doc x @ 750979 @ @ 1
1
2
3
4
5
6
Product description
Operating Instructions 2TMD041700D0043 6
Pos: 27 /CNDEX/01 Heading/1. 1 Heading/Heading_Feature @ 56\mod _1487747498194_15.doc x @ 750051 @ 2 @ 1
5.2 Feature
Pos: 28 /CNDEX/04 Feature/Featur e_H8131xPx-A_H8136xPx-A _Mini OS @ 56\mod_1487644733370 _15.docx @ 748028 @ @ 1
Aluminum alloy frame
3 intuitive LED indicators (ring, call and door open)
Available with one and two pushbuttons
Available with optional ID (125 KHz ) card reader
The 2nd button (if available) can be programmed to call guard unit, PC guard or another
residence
Supports 2 locks connection
Supports door status detection
Supports exit button to release the lock
0.3M pixel camera with large detection angle (H 86°,V 67°, D 104°)
Anti-fog design camera with in-built heater
In-built lighting and automatic backlight ensure clear view at night
Support 802.3af PoE and directly standalone power supply
Compact size, can be flush or surface mounted.
Pos: 29 /CNDEX/99 Auxiliary tools/+++ +++++++++++ page break ++++++++++++++ + @ 57\mod_1487814735946_0.doc x @ 750979 @ @ 1
Product description
Operating Instructions 2TMD041700D0043 7
Pos: 30 /CNDEX/01 Heading/1. 1 Heading/Heading_Termin al description @ 56\mod_1487747555 712_15.docx @ 750072 @ 2 @ 1
5.3 Terminal description
Pos: 31 /CNDEX/05 Terminal descript ion/Terminal description_ H8131xPx-A_H8136xPx-A _Mini OS @ 62\mod_1496209609504 _15.docx @ 784537 @ @ 1
Fig. 2: Terminal description
No Function
1 Connector for sensor used for door status detection
2 Connector for exit pushbutton
3 Plug-in clamps (LOCK-AGND) for door opener (15V 4A impulsive, 250 mA holding)
4 Plug-in clamps (COM-NC-NO) for floating output, door opener (30 VAC/DC 1A)
5 Plug-in clamps (DC+-GND) for standalone power supply
6 Connector for TCP/IP RJ45 port
7 LED indicator of LAN port
8 Set feedback tones for pushbuttons when pressing and outdoor station during a call
9 Assigns default lock ie 12VDC power supply (LOCK-GND) or Dry contact (Com-NC-NO)
Tab.2: Description
Pos: 32 /CNDEX/99 Auxiliary tools/+++ +++++++++++ page break ++++++++++++++ + @ 57\mod_1487814735946_0.doc x @ 750979 @ @ 1
TTL/N
ON
LAN
1
DS EXIT AGND LOCK NC NO GND
DC+
LED
COM
2
3 4 5
6
8
9
7
Product description
Operating Instructions 2TMD041700D0043 8
Pos: 33 /CNDEX/01 Heading/1. 1 Heading/Heading_Lock type and conn ection @ 56\mod_1487747624072 _15.docx @ 750093 @ 2 @ 1
5.4 Lock type and connection
Pos: 34 /CNDEX/05 Terminal d escription/Lock type_OS @ 56\m od_1487645786193_15.d ocx @ 748070 @ @ 1
Lock type Operation type Voltage Wiring type
Electrical strike lock, 12
V
Power on to open 12 VDC/AC
Type A
Type B
Electrical strike lock, 24
V
Power on to open 24 VDC/AC Type B
Electrical rim lock, 12 V Power on to open 12 VDC
Type A
Type B
Electrical mortise lock Power off to open 12 VDC Type C
Magnetic lock Power off to open 12/24 V DC Type C
Tab.3: Lock type
Pos: 35 /CNDEX/05 Terminal d escription/Lock connection_ H8131xPx-A_H8136xPx-A_Mi ni OS @ 56\mod_148764803524 2_15.docx @ 748091 @ @ 1
Fig. 3: Lock connection
Pos: 36 /CNDEX/99 Auxiliary tools/+++ +++++++++++ page break ++++++++++++++ + @ 57\mod_1487814735946_0.doc x @ 750979 @ @ 1
DS
EXIT
AGND
LOCK
NC
COM
NO
GND
DC+
DS
EXIT
AGND
LOCK
NC
COM
NO
GND
DC+
DS
EXIT
AGND
LOCK
NC
COM
NO
GND
DC+
PS
Type A Type B Type C
+
-
PS
+
-
Technical data
Operating Instructions 2TMD041700D0043 9
Pos: 38 /CNDEX/01 Heading/1. H eading/Heading_Technic al data @ 56\mod_1487744734167_15. docx @ 749958 @ 1 @ 1
6 Technical data
Pos: 39 /CNDEX/06 Technical d ata/Technical data_H8131xP x-A_H8136xPx-A_Mini OS @ 56\ mod_1487648157259_15. docx @ 748111 @ @ 1
Designation Value
Operating temperature -40 °C - +70 °C
Protection
dustproof and waterproof as IP 54, vandal proof
as IK 07
Power supply, door opener (Lock-GND) 15 V 4 A impulsive, 250 mA holding
Floating supply, door opener (COM-NC-NO) 30 VDC/AC 1A
Operating voltage 27 VDC
Dimension
Surface-mounted: 168 mm x 99 mm x 26 mm
Flush-mounted: 180 mm x 105 mm x 43 mm
Tab.4: Technical data
Pos: 40 /CNDEX/99 Auxiliary tools/+++ +++++++++++ page break ++++++++++++++ + @ 57\mod_1487814735946_0.doc x @ 750979 @ @ 1
Mounting/Installation
Operating Instructions 2TMD041700D0043 10
Pos: 42 /CNDEX/01 Heading/1. H eading/Heading_Mounting/ Installation @ 56\mod_14877433 69641_15.docx @ 749852 @ 1 @ 1
7 Mounting/Installation
Pos: 43 /CNDEX/00 Warning/W arning_Electric voltage_Dan gerous currents @ 56\mod_148774 1007782_15.docx @ 749637 @ @ 1
Warning
Electric voltage!
Dangerous currents flow through the body when coming into direct or indirect
contact with live components.
This can result in electric shock, burns or even death.
Disconnect the mains power supply prior to installation and/or disassembly!
Permit work on the 110-240 V supply system to be performed only by
specialist staff!
Pos: 44 /CNDEX/01 Heading/1. 1 Heading/Heading_Requirem ent for electrician @ 56\mod_148774 3099110_15.docx @ 749789 @ 2 @ 1
7.1 Requirement for the electrician
Pos: 45 /CNDEX/00 Warning/W arning_Electric voltage_Inst all the device @ 56\mod_14877432055 78_15.docx @ 749810 @ @ 1
Warning
Electric voltage!
Install the device only if you have the necessary electrical engineering
knowledge and experience.
Incorrect installation endangers your life and that of the user of the electrical
system.
Incorrect installation can cause serious damage to property, e.g. due to fire.
The minimum necessary expert knowledge and requirements for the installation
are as follows:
Apply the "five safety rules" (DIN VDE 0105, EN 50110):
1. Disconnect
2. Secure against being re-connected
3. Ensure there is no voltage
4. Connect to earth and short-circuit
5. Cover or barricade adjacent live parts.
Use suitable personal protective clothing.
Use only suitable tools and measuring devices.
Check the type of supply network (TN system, IT system, TT system) to
secure the following power supply conditions (classic connection to ground,
protective grounding, necessary additional measures, etc.).
Pos: 46 /CNDEX/99 Auxiliary tools/+++ +++++++++++ page break ++++++++++++++ + @ 57\mod_1487814735946_0.doc x @ 750979 @ @ 1
Mounting/Installation
Operating Instructions 2TMD041700D0043 11
Pos: 47 /CNDEX/01 Heading/1. 1 Heading/Heading_Mounti ng @ 56\mod_1487742836665_15. docx @ 749745 @ 2 @ 1
7.2 Mounting
Pos: 48 /CNDEX/07 Mounting/Inst allation/Preparation_OS @ 56\ mod_1487742936063_15. docx @ 749767 @ @ 1
Use gloves to protect yourself from being cut.
Fig. 4: Preparation
Pos: 49 /CNDEX/07 Mounting/Inst allation/Wiring_H8131xPx-A _H8136xPx-A_Mini OS @ 56\mod_14 87653746613_15.docx @ 748216 @ @ 1
Fig. 5: Wiring
Pos: 50 /CNDEX/99 Auxiliary tools/+++ +++++++++++ page break ++++++++++++++ + @ 57\mod_1487814735946_0.doc x @ 750979 @ @ 1
LAN
Mounting/Installation
Operating Instructions 2TMD041700D0043 12
Pos: 51 /CNDEX/01 Heading/1. 1.1 Heading/Heading_Surfac e-mounted installation @ 56\m od_1487748770156_15.doc x @ 750153 @ 2 @ 1
7.2.1 Surface-mounted installation
Pos: 52 /CNDEX/07 Mounting/Inst allation/Surface-mount ed installation_H8131xPx-A_ Mini OS @ 56\mod_1487653889 110_15.docx @ 748237 @ @ 1
Fig. 6: Product dimension
Fig. 7: Installation dimension
Fig. 8: Surface mounting on the wall
99 mm
26 mm
168 mm
78 mm
62 mm
6
0
m
m
147 mm
83 mm
62 mm
1
2
Mounting/Installation
Operating Instructions 2TMD041700D0043 13
Fig. 9: Surface mounting with standard flush-mounted box
Pos: 53 /CNDEX/99 Auxiliary tools/+++ +++++++++++ page break ++++++++++++++ + @ 57\mod_1487814735946_0.doc x @ 750979 @ @ 1
1
2
Mounting/Installation
Operating Instructions 2TMD041700D0043 14
Pos: 54 /CNDEX/01 Heading/1. 1.1 Heading/Heading_Flush- mounted installation @ 56\m od_1487748835312_15.docx @ 7 50174 @ 3 @ 1
7.2.2 Flush-mounted installation
Pos: 55 /CNDEX/07 Mounting/Inst allation/Flush-mount ed installation_M2136xPx-A_ Mini OS @ 56\mod_148765443622 1_15.docx @ 748258 @ @ 1
Fig. 10: Product dimension
Fig. 11: Mounting without pre-installation box
90 mm
105 mm
Front view Back view Side view
180 mm
168 mm
43 mm
168 mm
33 mm
10 mm
Mounting/Installation
Operating Instructions 2TMD041700D0043 15
Fig. 12: Mounting with pre-installation box
Pos: 56 /CNDEX/07 Mounting/Inst allation/Installation flexi bility_H8136xPx-A_Mini OS @ 56\ mod_1487655546460_15.doc x @ 748550 @ @ 1
For the flush-mounted installation, a pre-installation box is highly recommended to ensure the
efficient and sleek installation. Without the pre-installation box, in case the hole is deeper or tilt,
the installation will looks ugly or hard to install. For flush-mounting in a cavity wall, the pre-
installation box is not need.
Fig. 13: Installation flexibility
Pos: 57 /CNDEX/99 Auxiliary tools/+++ +++++++++++ page break ++++++++++++++ + @ 57\mod_1487814735946_0.doc x @ 750979 @ @ 1
99 mm
99 mm
45 mm
174 mm
174 mm
TOP
45 mm Max. 5 mm
Max. 3 mm
Deeper
T
ilt
Normal
Mounting/Installation
Operating Instructions 2TMD041700D0043 16
Pos: 58 /CNDEX/01 Heading/1. 1.1 Heading/Heading_Cavit y wall installation @ 56\mod_14877 48890973_15.docx @ 750195 @ 3 @ 1
7.2.3 Cavity wall installation
Pos: 59 /CNDEX/07 Mounting/Inst allation/Cavity wall installati on_H8136xPx-A_Mini OS @ 56\ mod_1487655095826_15.d ocx @ 748529 @ @ 1
Fig. 14: Product dimension
Fig. 15: Installation dimension
90 mm
105 mm
Front view Back view Side view
180 mm
168 mm
43 mm
7 mm
<29 mm
92 mm
97 mm
170
mm
120 mm
Mounting/Installation
Operating Instructions 2TMD041700D0043 17
Fig. 16: Cavity wall installation
Fix 4 claws onto the back of outdoor station with 4 screws. (The direction of the claws
please refer to the picture above)
Tie up 4 claws with 2 rubbers.
Put the back cover into the cavity wall.
Tighten 4 screws.
Latch the upper part onto the bottom part.
Pos: 60 /CNDEX/99 Auxiliary tools/+++ +++++++++++ page break ++++++++++++++ + @ 57\mod_1487814735946_0.doc x @ 750979 @ @ 1
Mounting/Installation
Operating Instructions 2TMD041700D0043 18
Pos: 61 /CNDEX/01 Heading/1.1. 1 Heading/Heading_Dismant ling and replacing the nameplate @ 64\mod_150 1833993640_15.docx @ 81323 7 @ 3 @ 1
7.2.4 Dismantling and replacing the nameplate
Pos: 62 /CNDEX/07 Mounting/Inst allation/Dismantling and r eplace the nameplate_Mini OS_1A @ 64\m od_1501048797771_15. docx @ 806429 @ @ 1
Fig. 17: Dismantling
Fig. 18: Replace the nameplate
Pos: 63 /CNDEX/99 Auxiliary tools/+++ +++++++++++ page break ++++++++++++++ + @ 57\mod_1487814735946_0.doc x @ 750979 @ @ 1
in
TTL/N
out
TTL/N
3
9
m
m
3
5
m
m
Mounting/Installation
Operating Instructions 2TMD041700D0043 19
Pos: 64 /CNDEX/01 Heading/1. 1.1 Heading/Heading_Inst allation situations @ 56\mod_1487 749033946_15.docx @ 750258 @ 3 @ 1
7.2.5 Installation situations
Pos: 65 /CNDEX/00 Warning/N ote_Installation situation s @ 56\mod_1487743694622_1 5.docx @ 749937 @ @ 1
Note
The following installation situations must be avoided without fail to ensure
picture quality.
Direct light
Direct sunlight
Extremely bright picture background
Highly reflective walls on the opposite side of the door station
Lamps or direct light sources
Pos: 66 /CNDEX/99 Auxiliary tools/+++ +++++++++++ page break ++++++++++++++ + @ 57\mod_1487814735946_0.doc x @ 750979 @ @ 1
Commissioning
Operating Instructions 2TMD041700D0043 20
Pos: 68 /CNDEX/01 Heading/1. Heading/Heading_Commiss ioning @ 57\mod_1487828936105 _15.docx @ 751257 @ 1 @ 1
8 Commissioning
Pos: 69 /CNDEX/08 Commissi oning/Find details in the system manual @ 62\ mod_1497234325447_1 5.docx @ 788858 @ @ 1
Please find details in the system manual.
Pos: 70 /CNDEX/99 Auxiliary tools/+++ +++++++++++ page break ++++++++++++++ + @ 57\mod_1487814735946_0.doc x @ 750979 @ @ 1
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

ABB H8136xPx-A User manual

Category
Door intercom systems
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI