SMART Technologies Board 600 and D600 Reference guide

Brand: SMART Technologies

Model: Board 600 and D600

Category: Interactive whiteboards

Type: Reference guide

SMART Technologies Board 600 and D600 are interactive whiteboards that enable simultaneous use by two students. They can switch between single-user and dual-user modes, allowing for collaboration and engagement. With dual-touch functionality, each student can interact with their half of the screen using their fingers, pens, or the eraser. The Floating Tools toolbar provides quick access to essential tools like the selector, pen, highlighter, eraser, shapes, and lines.

Getting Started

Using the SMART Board™

SBD600 Series Interactive

Whiteboard

The SBD600 is a dual-touch, dual-write SMART Board™ interactive whiteboard. It

enables two students to simultaneously use the interactive whiteboard.

This document explains how to switch between single-user and dual-user mode, and

start using dual-touch.

Opening SMART Notebook Software

Two students can simultaneously touch or write on the interactive whiteboard using

SMART Notebook software. Install SMART Notebook software and the SMART

product drivers from the CD, and then open SMART Notebook software.

The SMART Notebook window appears, and the interactive whiteboard is

automatically in single-user mode.

Switching Between Single-User and

Dual-User Mode

If you want to use the whole interactive whiteboard, you can use the interactive

whiteboard in single-user mode. As the only user, you can interact with the entire

interactive whiteboard and write or draw using all four pen tray pens. If you want two

students to simultaneously use the interactive whiteboard, switch to dual-user mode.

You can switch between single-user mode and dual-user mode at any time.

To select dual-user mode Press Dual Write Mode .

To select single-user

mode

Press Exit Dual Write Mode .

www.smarttech.com/support www.smarttech.com/contactsupport

Support +1.403.228.5940 or Toll Free 1.866.518.6791 (U.S./Canada)

99-01002-20 REV A0

Using the Interactive Whiteboard in

Dual-User Mode

Each student can press their half of the screen with their finger to left-click, write using

a pen tray pen and erase digital ink using the eraser. Each student can also access

frequently used tools using their own Floating Tools toolbar.

To left-click 1. For the left side of the screen, ensure that the black and red pen tray pens are in

the pen tray.

For the right side of the screen, ensure that the blue and green pen tray pens are

in the pen tray.

2. Press the interactive whiteboard with your finger.

To write or draw on the

interactive screen

1. For the left side of the screen, pick up the black or red pen tray pen.

For the right side of the screen, pick up the blue or green pen tray pen.

2. Write or draw on your half of the interactive screen.

3. When you finish writing and drawing, return the pen to the pen tray.

To erase digital ink 1. For the left side of the screen, ensure that the black and red pen tray pens are in

the pen tray.

For the right side of the screen, ensure that the blue and green pen tray pens are

in the pen tray.

2. Pick up the eraser, and then press it on your half of the interactive screen to erase

the digital ink.

3. When you finish erasing, return the eraser to the pen tray.

To select a Floating Tool Press a tool in the Floating Tools toolbar. The available tools are Select, Pen (black,

red, green and blue), Highlighter, Eraser, Shapes, Lines and Customize.

For more information on using Floating Tools, see the SMART Notebook software

online Help system.

and/or other countries. All other third-party product and company names may be trademarks of their respective owners. Patent No. US5448263; US6141000; US6320597; US6326954;

US6337681; US6741267; US6747636; US7151533; US7289113; US7499033; CA2058219; and CA2252302. Other patents pending. Contents are subject to change without notice. 08/2009.