Bosch MUZ8NV1(00) Operating instructions

Type
Operating instructions
6 Robert Bosch Hausgeräte GmbH
For your safety
This accessory is designed for the food processor MUM8.../MUMXL.. .
Follow the operating instructions for the food processor.
The pasta attachment MUZ8NV1 is suitable for shaping dough
sheets from prepared dough. The pasta attachments MUZ8NV2
and MUZ8NV3 are used to process the dough sheets, prepared
with the pasta attachment MUZ8NV1, into ribbon noodles.
Any other use is not permitted.
, Safety instructions for this appliance
Risk of injury
While working, do not place fingers between the rollers and do not
insert any objects between the rollers.
Use the accessories in the indicated operating position only.
The accessories must be completely assembled before use.
Do not remove/attach accessories until the drive has stopped.
Important!
An adapter is always required to attach the pasta attachments.
The adapter is available from a specialist outlet as an individual part
(MUZ8AD1) or in a set with the mincer (MUZ8FW1).
Overview
The instructions for use apply to different
models. Each model can be purchased
individually in the shops.
Please fold out the illustrated pages.
Fig.
1MUZ8NV1
Professional pasta attachment for dough
sheets (lasagne)
2MUZ8NV2
Professional pasta attachment for wide
noodles
3MUZ8NV3
Professional pasta attachment for fine
noodles
Fig.
1 Selection button (for MUZ8NV1 only)
2 Pasta attachment
3 Foot
4 Pasta adapter
5 Locking lever
6Rollers
Fig.
Operating position
Fig.
Adapter MUZ8AD1
Operation
Before using for the first time, thoroughly
clean pasta attachments, see “Cleaning
and care”.
en
Important information
In these instructions for use the recom-
mended reference values for the
operating speed refer to appliances with a
7-setting rotary switch.
For appliances with a 4-step rotary
switch the guide values can be found
in the following table:
7 settings: 1...2...3...4...5...6...7
4 settings: 1........2........3........4
Robert Bosch Hausgeräte GmbH 7
Preparation
Fig.
Press release button and move
multi-function arm to position 6.
Cover unused drives with drive covers.
Remove tool drive cover.
Attach adapter:
Insert driver.
Attach adapter and secure with
clamping screw.
Note position of the lug!
Attach pasta attachment to the base unit:
Place pasta attachment on the adapter.
Turn it anti-clockwise and press locking
lever down.
Place plate under the outlet opening.
Insert the mains plug.
Set rotary knob to setting 5.
After using the appliance
Switch off the appliance with the rotary
switch.
Remove mains plug.
Lift up locking lever, turn pasta attach-
ment clockwise and take off the appli-
ance.
Remove adapter and driver.
Cleaning and servicing Fig.
Warning!
Do not use abrasive cleaning agents.
Surfaces may be damaged.
Never rinse pasta attachment and adapter
under running water or clean with water.
Parts are not dishwasher-proof.
Clean pasta attachment and adapter
with a brush only.
Application instructions
Making dough sheets with MUZ8NV1
Prepare the noodle dough and then roll
it into smaller strips.
Set the selection button to position 1.
To do this, pull out the selection button,
turn and re-engage.
Switch on the food processor.
The rollers begin to turn.
Feed the dough strips through the rollers
until the surface is smooth.
Then gradually move the selection button
from position 1 to the required thickness
and feed the dough through the rollers.
Our recommendation:
for lasagne: thickness 6–7
for noodles: thickness 7–8
Note:
If the dough sticks to the rollers, leave
it to dry for approx. 15–30 minutes.
Then you can continue processing
the dough.
To continue processing or to dry
the dough, cut the rolled-out dough
into pieces of the required size.
Processing with MUZ8NV2/
MUZ8NV3
Pass dough pieces through the required
pasta attachment and spread out.
Noodles can then be prepared
immediately or can be dried for storage.
Cooking noodles
Fill a pan ¾ full of water and add salt
to taste.
If required, add a little oil to prevent
the noodles from sticking to each other.
Bring water to the boil.
Place noodles in boiling water and leave
to cook for approx. 2–5 minutes (depen-
ding on dough and dryness).
en
Risk of injury
While working, do not place fingers
between the rollers and do not insert
any objects between the rollers.
8 Robert Bosch Hausgeräte GmbH
Recipes
Put all ingredients in the bowl.
Using the kneading hook, knead
for 4–6 minutes at setting 3.
If the dough is too dry, add water.
The dough must be shaped into
a solid ball.
Egg noodles
500 g wheat flour
250 g eggs (approx. 5x)
2–3 tbs. (20 g–30 g) water
Tomato noodles
500 g wheat flour
140 g tomato pulp
120 g eggs (approx. 2x)
4–6 tbs. (40–60 g) water
Wholemeal noodles
500 g wholemeal flour
300 g eggs (approx. 6x)
Spinach noodles
500 g wheat flour
200 g spinach
8 tbs. (85 g) water
Noodle dough with hard wheat semolina
250 g wheat flour
250 g hard wheat semolina
10–12 tbs. (100–120 g) boiling water
120 g eggs (approx. 2x)
Noodle dough with buckwheat
200 g buckwheat
300 g wheat flour
180 g eggs (approx. 3x)
5–7 tbs. (50–70 g) boiling water
en
Subject to alterations.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59

Bosch MUZ8NV1(00) Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI