The original door machine “Package” as created by STERO.
We took our 15 kW Booster and mounted it on our Model
SDRA Door Machine, then inter-plumbed it to one water and
one drain connection. We inter-wired the motor, electric tank
heater and booster to a circuit breaker panel mounted next to
the control panel.
We put on a shock arrester, pressure reducing valve,
and incoming water temperature gauge to complete the
“Package”.
The “complete” door machine with all components mounted...
that’s the STERO SDRA “PACKAGE”.
STERO SDRA PACKAGE STATIONARY RACK WASHER
DOOR-TYPE
Product Specification Sheet
SDRA PACKAGE: SINGLE TANK STATIONARY DOOR-TYPE 20" RACK CANTILEVER POP-UP DOOR
Featuring the Stero Pop-up Door
and Integrated Electric Booster
Item #: ___________________________________________ A/A File #: ___________________________________________
Safety Switch: Unit will not operate unless the door is in
closed position.
Fully Automatic Operating Controls: Timed wash, rinse
and dwell for 60 second cycle time.
Motor: 1 HP, drip-proof, 1750 rpm, sealed ball bearings,
with overload protection, completely integrated with
centrifugal pump through stainless steel rotary seal.
Thermometers: One each in wash tank and final rinse.
Mounted at eye level.
Balanced Revolving Wash Action: Above and below
ware.
Front Enclosure Panel: Stainless steel.
Cantilever Hood: Without front corner posts; permits
completely flexible installation in straight-through, corner,
or U-shaped table arrangements.
Tank and Hood: Seamless welded construction using
16 gauge, type 304/18 – 8, No. 4 mill finish stainless
steel. Rack tracks are 12 gauge stainless steel.
Frame: Heavy tubular steel and flat stock with adjustable
feet conforming to NSF Standard No. 3.
Flow Pressure Gauge: On final rinse line.
Internal Wiring Complete: Waterproof conduit to terminal
block in control box for connection of motor service (1
HP) and tank heater (5 kW), & 15 kW booster.
Internal Plumbing Complete: Final connections limited
to one 140° water connection with complete final rinse
plumbing assembly and one waste connection.
STANDARD FEATURES
STANDARD EQUIPMENT FEATURES BENEFIT
Full perimeter frame Longevity and durability
Cast stainless wash arms Full rack coverage for excellent results
Cantilever door with no corner posts Ease of loading and unloading
All available options are standard on this unit Closing door starts the wash cycle, door automatically opens at end of cycle
Frame mounted booster interwired for single point electrical connection Circuit breaker protection for all electrical components
STERO SDRA PACKAGE
Product Specification Sheet
STERO, a division of Illinois Tool Works Inc.
3200 Lakeville Highway
Petaluma, CA 94954
Phone: 800-762-7600
Fax: 707-762-5036
WWW.STERO.COM
Printed in the USA
/