Planar SL5550 User manual

Brand: Planar

Model: SL5550

Category: Public displays

Type: User manual

This manual is also suitable for

Simplicity Series

Safety Instructions

Warnings and Precautions

KNOW THESE SAFETY SYMBOLS

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

This symbol indicates high voltage is present

inside. It is dangerous to make any kind of

contact with any inside part of this product.

This symbol alerts you that important literature

concerning operation and maintenance has

been included with this product.

CAUTION: FCC/CSA regulations state that any unauthorized

changes or modications to this equipment may

void the user’s authority to operate it.

CAUTION: To prevent electric shock, match the wide blade

of plug to the wide slot, and fully insert the plug.

TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE

OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

The Socket-outlet should be installed near the apparatus and

be easily accessible.

Read and follow these instructions

when connecting and using your Public

Information Display:

• Unplug the display if you are not going to use it for an

extensive period of time.

• Unplug the display if you need to clean it with a slightly

damp cloth. The screen many be wiped with a dry cloth

when the power is off. However, never use alcohol, solvents

or ammonia-based liquids.

• Consult a service technician if the display does not operate

normally when you have followed the instructions in this

manual.

• The casing cover should be opened only by qualied service

personnel.

• Keep the display out of direct sunlight and away from stoves

or any other heat sources.

• Remove any object that could fall into the vents or prevent

proper cooling of the display’s electronics.

• Do not block the ventilation holes on the cabinet.

• Keep the display dry. To avoid electric shock, do not expose

it to rain or excessive moisture.

• If turning off the display by detaching the power cable, wait

for 6 seconds before re-attaching the power cable for normal

operation.

• To avoid the risk of shock or permanent damage to the set

do not expose the display to rain or excessive moisture.

• When positioning the display, make sure the power plug and

outlet are easily accessible.

• IMPORTANT: Always activate a screen saver program

during your application. If a still image in high contrast

remains on the screen for an extended period of time, it may

leave an ‘after-image’ or ‘ghost image’ on the front of the

screen. This is a well-known phenomenon that is caused by

the shortcomings inherent in LCD technology. In most cases

the afterimage will disappear gradually over a period of time

after the power has been switched off. Be aware that the

after-image symptom cannot be repaired and is not covered

under warranty.

Simplicity Series

iii

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance

with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including ampliers)

that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wide blade or the

third prong are provided for your safety. If the provided

plug does not t into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11. Only use attachments/accessories specied by the

manufacturer.

12. Use only with the cart, stand, tripod, bracket,

or table specied by the manufacturer, or

sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when

unused for long periods of time.

14. Refer all servicing to qualied service personnel. Servicing

is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid

has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does

not operate normally, or has been dropped.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS APPARATUS

TO RAIN OR MOISTURE.

WARNING: Apparatus shall not be exposed to dripping or

splashing and no objects lled with liquids, such

as vases, shall be placed on the apparatus.

WARNING: The batteries (batteries installed) shall not be

exposed to excessive heat such as sunshine, re

or the like.

WARNING: The mains plug or appliance coupler is used as

the disconnect device,the disconnect device shall

remain readily operable.

WARNING: To prevent the spread of re, keep candles or

other open ames away from this product at all

times.

WARNING: To prevent injury, this apparatus must be securely

attached to the oor/wall in accordance with the

installation instructions.

CAUTION: These servicing instructions are for use by

qualied service personnel only. To reduce the

risk of electric shock,do not perform any servicing

other than that contained in the operating

instructions unless you are qualitied to do so.

CAUTION: Excessive sound pressure from earphones and

headphones can cause hearing loss. Adjustment

of the equalizer to maximum increases the

earphone and headphone output voltage and the

sound pressure level. Therefore, to protect your

hearing, adjust the equalizer to an appropriate

level.

For UL/CUL application: For use only with UL Listed Wall

Mount Bracket with minimum weight/load:

Minimum weight/load (kg)

SL3250 19.8

SL4250 35.7

SL4650 41.1

SL5550 63.6

For CB application: The equipment and its associated

mounting means still remain secure during the test:

Unit Weight

(kg)

VESA Size

(mm)

Mounting Screws

(X=Thickness of wall-mount plate)

SL3250 6.6 200 × 100 M6 × (16 + X)

SL4250 11.9 400 × 400 M6 × (20 + X)

SL4650 13.7 400 × 400 M6 × (20 + X)

SL5550 21.2 400 × 400 M6 × (24 + X)

Simplicity Series

Regulatory Information:

Products: SL3250, SL4250, SL4650 and

SL5550; Regulatory Models: DS323QBT,

DS423QBT, DS463QBT and DS553QBT.

CE Declaration of Conformity

We declare under our responsibility that the product is in

conformity with the following standards:

• EN60065:2002+A1:2006+A11:2008+A2:2010+A12:2011

(Safety requirement of Audio, video and similar electronic

apparatus)

• EN55022:2010 (Radio Disturbance requirement of

Information Technology Equipment)

• EN55024:2010 (Immunity requirement of Information

Technology Equipment)

• EN61000-3-2:2006 +A1:2009+A2:2009 (Limits for Harmonic

Current Emission)

• EN61000-3-3:2008 (Limitation of Voltage Fluctuation and

Flicker)

• EN 50581:2012 (Technical documentation for the

assessment of electrical and electronic products with respect

to the restriction of hazardous substances)

following provisions of directives applicable:

• 2006/95/EC (Low Voltage Directive)

• 2004/108/EC (EMC Directive)

• 2009/125/EC (ErP Directive, EC No. 1275/2008, 642/2009

Implementing Directive for Standby and Off mode power

consumption)

• 93/68/EEC (Amendment of EMC and Low Voltage Directive)

and is produced by a manufacturing organization on

ISO9000 level.

• 2011/65/EU (RoHS 2 Directive)

Federal Communications Commission (FCC)

Notice (U.S. Only)

This equipment has been tested and found

to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference when

the equipment is operated in a commercial

environment. This equipment generates, uses

and can radiate radio frequency energy and,

if not installed and used in accordance with

the instructions manual, may cause harmful

interference to radio communications. Operation

of this equipment in a residential area is likely

to cause harmful interference in which case the

user will be required to correct the interference

at his own expense.

Changes or modications not expressly

approved by the party responsible for

compliance could void the user’s authority to

operate the equipment.

Use only an RF shielded cable that was supplied with the

display when connecting this display to a computer device.

To prevent damage which may result in re or shock hazard, do

not expose this appliance to rain or excessive moisture.

THIS CLASS B DIGITAL APPARATUS MEETS ALL

REQUIREMENTS OF THE CANADIAN INTERFERENCE-

CAUSING EQUIPMENT REGULATIONS.

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following

two conditions: (1) this device may not cause

harmful interference, and (2) this device must

accept any interference received, including

interference that may cause undesired

operation.

Simplicity Series

End-of-Life Disposal

Your new Public Information Display contains materials that can

be recycled and reused. Specialized companies can recycle

your product to increase the amount of reusable materials and

to minimize the amount to be disposed of.

Please nd out about the local regulations on how to dispose of

your old display from your local dealer.

(For customers in Canada and U.S.A.)

Dispose of in accordance to local-state and federal regulations.

For additional information on recycling contact www.eia.org

(Consumer Education Initiative)

Waste Electrical and Electronie Equipment-

WEEE

Attention users in European Union private

households

This marking on the product or on its packaging

illustrates that, under European Directive

2002/96/EC governing used electrical and

electronic appliances, this product may

not be disposed of with normal household

waste. You are responsible for disposal of

this equipment through a designated waste

electrical and electronic equipment collection.

To determine the locations for dropping off such

waste electrical and electronic, contact your

local government ofce, the waste disposal

organization that serves your household or the

store at which you purchased the product.

End of Life Directives-Recycling

Your new Public Information Display contains

several materials that can be recycled for new

users.

Please dispose of according to all Local, State,

and Federal laws.

Simplicity Series

Table Of Contents

4.3.3. Play les from wireless

device .................................... 16

4.4. Play options ..................................... 16

4.4.1. Playing music les ................ 16

4.4.2. Playing movie les ................ 17

4.4.3. Playing photo les ................. 17

5. Change your settings ............................ 18

5.1. Settings ........................................... 18

5.1.1. Picture menu ......................... 18

5.1.2. Sound menu .......................... 19

5.1.3. General settings menu .......... 19

5.2. Network Settings ............................. 20

6. Input mode ............................................. 21

7. Cleaning and Troubleshooting ............. 22

7.1. Cleaning .......................................... 22

7.2. Troubleshooting ............................... 23

8. TechnicalSpecications ....................... 24

8.1. SL3250 ............................................ 24

8.2. SL4250 ............................................ 25

8.3. SL4650 ............................................ 26

8.4. SL5550 ............................................ 27

1. Unpacking and Installation ..................... 1

1.1. Unpacking ......................................... 1

1.2. Package Contents ............................. 1

1.3. Installation Notes ............................... 1

1.4. Mounting on a Wall ............................ 2

1.5. Cable Management ........................... 3

1.6. Orientating in Portrait ........................ 3

2. Parts and Functions ................................ 4

2.1. Control Panel .................................... 4

2.2. Input/Output Terminals ...................... 6

2.3. Remote Control ................................. 8

2.3.1. General functions .................... 8

2.3.2. Inserting batteries in the remote

control ..................................... 9

2.3.3. Handling the remote control .... 9

2.3.4. Operating range of the remote

control ..................................... 9

2.4. RS232 Control ................................ 10

2.5. LAN control .................................... 10

3. Connection ............................................. 11

3.1. Connecting External Equipments .... 11

3.2. Connecting Multiple Displays .......... 12

3.2.1. RS232 Loop Through ........... 12

3.2.2. IR Loop Through .................. 12

3.3. IR Pass-through Connection ........... 13

3.4. Connecting Display to the Network . 13

3.5. Connecting Display to a Wireless

Device ............................................. 14

4. Operation ................................................ 15

4.1. Watch the Connected Video Source 15

4.2. Change Picture Format ................... 15

4.3. Play Multimedia Files ...................... 15

4.3.1. Play les from computer ....... 15

4.3.2. Play multimedia les from USB

device .................................... 15

Simplicity Series

1. Unpacking and Installation

1.1. Unpacking

• This product is packed in a carton, together with the standard accessories.

• Any other optional accessories will be packed separately.

• Due to the size and weight of this display it is recommended for two people to move it.

• After opening the carton, ensure that the contents are complete and in good condition.

1.2. Package Contents

Please verify that you received the following items with your package content:

• LCD display

• User manual

• Remote control with AAA batteries

• Power cord (1.8 m)

• VGA cable (1.8 m)

• RS232 cable (1.8 m)

• Cable Clamps (2)

Remote Control

and AAA Batteries

VGA Cable

RS232 Cable

Power Cord

Cable clamps (2)

Quick Start Guide

NOTES:

• For all other regions, apply a power cord that conforms to the AC voltage of the power socket and has been approved by and

complies with the safety regulations of the particular country.

• Keep the package box and packing material for shipping the display.

1.3. Installation Notes

• Due to the high power consumption, always use the plug exclusively designed for this product. If an extended line is required, please

consult your service agent.

• The product should be installed on a at surface to avoid tipping. The distance between the back of the product and the wall should

be maintained for proper ventilation. Avoid installing the product in the kitchen, bathroom or any other places with high humidity so as

not to shorten the service life of the electronic components.

• The product can normally operate only under 2000 m in altitude. In installations at altitudes above 2000 m, some abnormalities may

be experienced.

Simplicity Series

1.4. Mounting on a Wall

To mount this display to a wall, you will have to obtain a standard wall-mounting kit. We recommend using a mounting interface that

complies with UL1678 standard in North America.

SL3250:

Protective Sheet

Table

200

100

SL4250:

Protective Sheet

Table

400

SL4650:

Protective Sheet

Table

400

SL5550:

Protective Sheet

Table

400

1. Lay a protective sheet on a table, which was wrapped around the display when it was packaged, beneath the screen surface so as

not to scratch the screen face.

2. Ensure you have all accessories for mounting this display.

3. Follow the instructions that come with the base mounting kit. Failure to follow correct mounting procedures could result in damage to

the equipment or injury to the user or installer. Product warranty does not cover damage caused by improper installation.

4. For the wall-mounting kit, use mounting screws and tighten them securely:

VESA Size (mm)

Mounting Screws

(X=Thickness of wall-mount plate)

SL3250 200 × 100 M6 × (16 + X)

SL4250 400 × 400 M6 × (20 + X)

SL4650 400 × 400 M6 × (20 + X)

SL5550 400 × 400 M6 × (24 + X)

Simplicity Series

Caution:

To prevent the display from falling:

• To lessen the probability of injury and damage resulting from fall of the display in case of earthquake or other natural disaster, be sure

to consult the bracket manufacturer for installation location.

Ventilation Requirements for enclosure locating

To allow heat to disperse, leave space between surrounding objects as shown in the diagram below.

10 mm 10 mm

10 mm

1.5. Cable Management

To use cable clamps for cable management.

Use cable clamp A to lock

the power cord

Use cable clamp B to

arrange the wires / cables

in side terminals



1.6. Orientating in Portrait

When using the display in the portrait position and looking at the front of the display,

it should be rotated clockwise so that the IR sensor window is on the bottom of the display. This will allow for proper ventilation.

Simplicity Series

2. Parts and Functions

2.1. Control Panel

SL3250:

INPUT MENU

SL4250:

INPUT MENU

SL4650:

INPUT MENU

SL5550:

INPUT MENU

Simplicity Series

[ ] button

Press to switch the display on or off.

[ ] button

Press to select input source.

[ ] button

Press to access the OSD menu.

[ ] button

Press to move the highlight bar right to selected item while OSD menu is on.

[ ] button

Press to move the highlight bar left to deselected item while OSD menu is on.

[ ] button

Press to move the highlight bar up or increase the adjustment while OSD menu is on, or to increase the audio output level while OSD

menu is off.

[ ] button

Press to move the highlight bar down or decrease the adjustment while OSD menu is on, or to decrease the audio output level while

OSD menu is off.

Remote control sensor and power status indicator

• Receives command signals from the remote control.

- Light off when the display is turned on

- Lights red when this display is in standby mode

- Lights off when the main power of this display is turned off

Simplicity Series

2.2. Input/Output Terminals

SL3250:

3 4

1 2

Y Pb Pr

LRL R

OUT

INOUT

SL4250:

3 4

2 1

Y Pb Pr

LRL R

OUT

INOUT

SL4650:

3 4

2 1

Y Pb Pr

LRL R

OUT

INOUT

SL5550:

3 4

2 1

Y Pb Pr

LRL R

OUT

INOUT

Simplicity Series

AC IN

AC power input.

MAIN POWER SWITCH

Main power on/off switch.

HDMI IN

HDMI video/audio input.

DVI IN

DVI-D video input.

RJ-45

LAN control function for the use of remote control signal from control center.

VGA IN (D-Sub)

VGA video input.

COMPONENT IN (RCA)

Component YPbPr video source input.

AUDIO IN (RCA)

Audio input from external AV device.

AUDIO OUT (RCA)

Audio signal output to connect your external AV device.

AUDIO IN (3.5mm)

Audio input from your PC.

SPDIF OUT

Digital audio signal output to connect your external AV device.

IR OUT /

IR IN (3.5 mm)

IR signal output/input for the loop-through function.

NOTES:

• This display’s remote

control sensor will stop working if the jack [IR IN] is connected.

• To remotely control your A/V device via this display, refer to page 13 for IR Pass Through connection.

RS232C OUT /

RS232C IN (2.5 mm)

RS232C network output/input for the loop-through function.

USB PORT

Connect your USB storage device.

Simplicity Series

2.3. Remote Control

2.3.1. General functions

POWER button

Switch this display on or off.

PLAY buttons

Control playback of media les.

SOURCE button

Select input source. Press [ ] or [ ] button to select from

USB, Network, HDMI, DVI, YPbPr, AV, or VGA. Press [

] button to conrm and exit.

HOME button

Access the OSD menu.

LIST

Not applicable.

NAVIGATION buttons

Navigate through menus and select items.

button

Conrm an entry or selection.

ADJUST button

Access currently available options, picture and sound

menus.

BACK button

Return to the previous menu page or exit from the previous

function.

VOLUME button

Adjust volume.

MUTE button

Press to turn the mute function on/off.

COLOR buttons

Select tasks or options for media player.

NUMERIC buttons

Enter text for network setting.

FORMAT button

Change picture format.

INFO button

Display information about current activity.

OPTIONS

Access currently available options, picture and sound

menus.

Simplicity Series

2.3.2. Inserting batteries in the remote control

The remote control is powered by two 1.5V AAA batteries.

To install or replace batteries:

1. Press and then slide the cover to open it.

2. Align the batteries according to the (+) and (–) indications inside

the battery compartment.

3. Replace the cover.

Caution:

The incorrect use of batteries can result in leaks or bursting. Be sure to follow these instructions:

• Place “AAA” batteries matching the (+) and (–) signs on each battery to the (+) and (–) signs of the battery compartment.

• Do not mix battery types.

• Do not combine new batteries with used ones. It causes shorter life or leakage of batteries.

• Remove the dead batteries immediately to prevent them from liquid leaking in the battery compartment. Don’t touch exposed battery

acid, as it can damage your skin.

NOTE: If you do not intend to use the remote control for a long period, remove the batteries.

2.3.3. Handling the remote control

• Do not subject to strong shock.

• Do not allow water or other liquid to splash the remote control. If the remote control gets wet, wipe it dry immediately.

• Avoid exposure to heat and steam.

• Other than to install the batteries, do not open the remote control.

2.3.4. Operating range of the remote control

Point the front of the remote control toward this display’s remote control sensor

when pressing a button.

Use the remote control within a distance of less than 10m/33ft from this

display’s sensor, and a horizontal and vertical angle of less than 30 degrees.

NOTE: The remote control may not function properly when the remote control

sensor on this display is under direct sunlight or strong illumination, or

when there is an obstacle in the path of signal transmission.

30 30

Simplicity Series

2.4. RS232 Control

See www.planar.com for Simplicity RS-232 manual.

2.5. LAN control

The Simplicity Series supports extending access to the RS232 commands over a

network connection. Below are the steps to follow for controlling the display over LAN through the RJ45 connector:

1. Connect display & PC to hub or connect display to PC with LAN cable directly.

2. SET display IP address

Step 1: In Network Settings menu, select ”Network conguration”->”Static IP”

Step 2: Then go to “Static IP conguration” and enter the pertinent information.

Step 3: “View network settings” to check IP address

3. Commands are sent via TCP connection to port 5000. The commands are the same as for the RS232 port (see Simplicity RS-232

manual on www.planar.com).

4. You can test commands using any TCP utility program that allows you to enter binary data in hexadecimal format. (Note: Contact

Planar Technical Support for recommended programs.)

Simplicity Series

3. Connection

Note: VGA cable and power cord included with display. All other cables to be purchased separately.

3.1. Connecting External Equipments

DVD / VCR / VCD

STEREO AMPLIFIER

AUDIO OUT

USB

RS232C

INOUT

AUDIO IN

AUDIO

COMPONENT OUT (YPbPr)

SPDIF

HDMI IN DVI IN RJ-45 VGA IN COMPONENT IN

AUDIO OUT

DVI OUT

VGA OUT

USB

AUDIO OUT

AUDIO IN

HDMI OUT

AC IN

Y Pb Pr

USB

Simplicity Series

3.2. Connecting Multiple Displays

3.2.1. RS232 Loop Through

You can control multiple displays at one time through RS232. Loop through cables are not included with the display and would need to

be purchased separately.

DISPLAY 1

DISPLAY 2

[RS232C IN]

[RS-232C]

[RS232C OUT]

[RS232C IN] [RS232C OUT]

3.2.2. IR Loop Through

You can control multiple displays at one time with one remote using the IR in/out connectors on the display. External IR Receivers and IR

loop through cables are not included with the display and would need to be purchased separately.

DISPLAY 1 DISPLAY 2

[IR IN] [IR OUT] [IR IN]

External

IR Receiver

[IR OUT]

NOTE: This display’s remote control sensor will stop working if the [IR IN] is connected.

Simplicity Series

3.3. IR Pass-through Connection

You can use your display remote to control one of your sources if they are connected by IR loop through cables. These cables are not

included with the display and would need to be purchased separately.

DISPLAY

DVD / VCR / VCD

(DVD / VCR / VCD)

(Simplicity Series)

Remote Control

[IR OUT]

[IR IN]

3.4. Connecting Display to the Network

If you connect the display to a network, you can play photos, videos, and music from your computer.

[RJ-45]

Hub

To set up the connection::

1. Connect the display with a LAN cable connected to a hub or router on your network.

2. Press

HOME button to display the OSD menu.

3. Press or button to select the menu item {Network setting}. Press OK button to enter its submenu.

4. Go to network conguration and select DHCP & Auto IP or Static IP. If you select Static IP, you will need to enter the information in the

Static IP Conguration menu.

5. Connect the PC with a LAN cable connected to the Ethernet using a hub or router. Identify the network on your computer.

6. Conrm that a media server is running on your computer, such as Windows Media Player (11 or higher) for PC or Twonky for Mac.

7. Make sure you have the appropriate settings on your computer rewall to allow you to run the media server through the network.

8. See Play Multimedia Files (Page 15) for more detail on playing content.

ManagesecuritytolesusingstandardWindowsandMacprivacyfeatures..

Simplicity Series

3.5. Connecting Display to a Wireless Device

If you connect the display to a wireless router, you can access les from a wireless device, like a smartphone, tablet, or laptop. For best

results, we recommend using a device with built-in DLNA functionality. Do not connect multiple device at the same time.

To set up the connection:

1. Connect your wireless device to the internet to download app that are designed to send media via DLNA (Examples: iMediashare,

ArkMC)

2. Connect your device to the wireless router.

3. Enable network sharing on your device. This varies for different phone/tablet models.

4. Enable DMR (Digital Media Renderer) feature on the display under Network Settings. Got to Digital Media Renderer submenu and

select ON.

5. See Play Multimedia Files (Page 15) for more detail on playing content.

Page is loading ...

Planar SL5550 User manual

Brand: Planar

Model: SL5550

Category: Public displays

Type: User manual

This manual is also suitable for

Download PDF

report

Planar SL5550 User manual

This manual is also suitable for

Planar SL5550 User manual

Related papers

Other documents