BenQ TL240C transparent display has a 1366 x 768 image resolution, 260 nits brightness, and a 3000:1 contrast ratio. It can be connected to a computer or media player via HDMI, VGA, or DVI cables. The TL240C also has a USB port that can be used to play media files from a USB flash drive. The TL240C can be controlled using the included remote control or the buttons on the side of the display.
BenQ TL240C transparent display has a 1366 x 768 image resolution, 260 nits brightness, and a 3000:1 contrast ratio. It can be connected to a computer or media player via HDMI, VGA, or DVI cables. The TL240C also has a USB port that can be used to play media files from a USB flash drive. The TL240C can be controlled using the included remote control or the buttons on the side of the display.
TL240C/TL321C
Transparent Display
User Manual
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or
implied, with respect to the contents of this document. BenQ Corporation reserves the
right to revise this publication and to make changes from time to time in the contents
thereof without obligation to notify any person of such revision or changes.
Copyright
Copyright 2016 BenQ Corporation. All rights reserved. No part of this publication may
be reproduced, transmitted, transcribed, stored in a retrieval system or translated into
any language or computer language, in any form or by any means, electronic, mechanical,
magnetic, optical, chemical, manual or otherwise, without the prior written permission
of BenQ Corporation.
10/31/16
Table of Contents 3
Table of Contents
Disclaimer.............................................................................. 2
Copyright............................................................................... 2
Important Safety Instructions ........................................... 5
Safety Precautions and Maintenance ........................................... 5
Introduction .......................................................................... 6
Functions and Features .................................................................. 6
Package Content.............................................................................. 6
Product Overview ............................................................... 7
Connections...................................................................................... 7
Control Panel ................................................................................... 9
Installation ........................................................................... 10
Install Remote Control Batteries.............................................. 10
Using the Remote Control.............................................. 11
The OSD Functions .......................................................... 13
Input Source................................................................................... 13
Picture ............................................................................................. 13
Audio............................................................................................... 15
Time Scheduling ............................................................................ 16
Setup................................................................................................ 17
USB .................................................................................................. 17
More Information .............................................................. 20
Supported Video and Photo....................................................... 20
Supported Timing Mode ............................................................. 20
Product Specification ........................................................ 21
Dimensions.......................................................................... 22
TL240C ........................................................................................... 22
TL321C ........................................................................................... 23
Other Notices.................................................................... 24
Appendix 1.......................................................................... 25
Timer Scheduling (Default Setting: Off) .................................. 25
Appendix 2.......................................................................... 27
USB .................................................................................................. 27
Important Safety Instructions 5
Important Safety Instructions
Safety Precautions and Maintenance
• Please read this user manual before operating this transparent cabinet. Keep this manual
in a safe place for future reference.
• Always place the transparent cabinet on a flat surface during operation.
• Do not place inflammables near the transparent cabinet
• Do not put any object on the transparent cabinet that might crash it.
• Do not place liquids near or on the cabinet. Liquids spilled into the transparent cabinet
will void your warranty.
• Do not wipe out the surface of transparent cabinet with any corrosive.
• Do not scratch the surface of transparent cabinet with any sharp objection.
• Avoid putting volatile matter nearby the cabinet.
• Do not tear down the cabinet without any authorized engineer.
• Always plug in the DC connector first, then plug in the AC connector.
Use of control, adjustments, or procedures other than those specified in this
documentation may result in exposure to shock, electrical hazards and/or
mechanical hazards.
Introduction6
Introduction
This manual will explain the operation of TL240C/TL321C, including functions, features,
and other important information. Before installing or operating your liquid crystal display,
please take time to read the manual, particularly the sections on safety.
Functions and Features
• 1366 x 768 image resolution
• 260 (TL240) / 217 (TL321C) nits brightness
• 3000:1 contrast ratio
• HDMI digital, high-definition multimedia interface
• VGA, Video Graphics Array
• DVI, Digital Visual Interface
• USB flash disk to auto-play videos
Package Content
LCD display x 1 Remote control x 1
Power cord x 1 (by region) D-Sub (15-pin) cable x 1
HDMI cable x 1 Quick start guide x 1
Adapter
ENTER
CATV
MTS
C.C
EPG
SLEEP
RECORD
LIST
+
-
INFO
USB
1
2
3
4
5
6
78
9
_
0
FAV
MENU
EXIT
SO
UND
VOL
+
-
CH
PI
CTURE
Product Overview 7
Product Overview
Connections
Insert USB Stick
You can select a USB stick and let the display signage box display the media files in the
USB stick.
TL240C
TL321C
Product Overview8
Connect Signal Cables
Three signal input ports are provided, and the connections between the signal source and
the display are:
After you turn on the connected computer or the media player, it would be better to set
the output resolution to 1366 x 768 @ 60Hz.
Tu r n P o we r O n
Press the power button on the right side of the LCD display or on the remote control to
turn on the display.
Signal Source Description Connection Cable
VGA
HDMI
DVI
Product Overview 9
Control Panel
Control Panel
(Down), (Up)
(Left), (Right)
MENU
ENTER/VIDEO SOURCE
Power On/Off
TL240C TL321C
MENU
INPUT
(Bottom)
(Back side)
Installation10
Installation
Install Remote Control Batteries
Caution
• Dispose of the battery in accordance with local laws and regulations.
• Keep the battery away from children and pets.
• When the remote control is not used for an extended period, remove the battery.
• Remove the battery cover.
• Insert a battery.
• Re-attach the battery support.
AAA Batteries need to be purchased by customers.
ENTER
CATV
MTS
C.C
EPG
SLEEP
RECORD
LIST
+
-
INFO
USB
12
3
45
6
7
8
9
_
0
FAV
MENU
EXIT
S
O
UND
VOL
+
-
CH
P
I
CT
U
RE
Using the Remote Control 11
Using the Remote Control
Keypad
Function Remote Control
Switch power on or power off
MUTE on or off
Not support
Not support
Not support
Not support
Fast backward
Fast forward
Previous
Next
Not support
Not support
Play and Pause
Stop
File list
Information
Zoom mode setting
Enter Media Player
Enter setup menu
Input source setting (only support for
HDMI/VGA/DVI)
Using the Remote Control12
Keypad
Function Remote Control
Exit
Not support
Up
Left
Right
Down
Enter
Volume up or down
Not support
Sound mode setting (only support for
HDMI/VGA/DVI)
Image mode setting (only support for
HDMI/VGA/DVI)
Not support
Not support
Not support
The OSD Functions 13
The OSD Functions
Input Source
Picture
Item Selection Description
Input Source VGA, HDMI, DVI To select the input signal source.
Item Selection Description
Picture Mode
(only support for
VGA/HDMI/DVI)
Sharpness,
Saturation & Hue and
Color can be selected
only for the video
signal.
Standard, Dynamic,
Soft
To select the type of preset picture
mode that suit your personal
preference or viewing requirement.
Personal, Contrast,
Brightness,
Sharpness, Hue,
Saturation
• To manually configure the
following picture setting to suit
your personal preference or
viewing requirement.
• To adjust the contrast level of
picture.
• To adjust the brightness level of
picture.
• To adjust the edge definition of
picture.
• To adjust the color hue of picture.
• To adjust the color saturation of
picture.
Color Mode Cool, Normal, Warm
For color temperature adjustment,
you can select Cool/Normal/Warm
mode.
The OSD Functions14
Advanced (only for
input source set to
VGA)
H-Pos., V-Pos., Clock,
Phase, Auto
• To manually adjust the position of
the display area left or right.
• To manually adjust the position of
the display area up or down.
• To manually adjust the width of
the display image.
• To manually sharpen the focus of
text or graphic with pixel
boundaries.
• To automatically adjust the
incoming VGA signal to the
optimal status for displaying.
Zoom Mode Full, 4:3, 16:9
• Set the picture to full screen.
• Set the picture to 4:3 format and
put black borders on the left and
right of the picture.
• Set the picture to 16: 9 format
and put black borders on the left
and right of picture.
Backlight 1~100
To adjust the brightness of LED
backlight.
The OSD Functions 15
Audio
Item Selection Description
Equalizer Standard
Standard, Music,
Movie, Sports
To select the type of preset picture
mode that suit your personal
preference or viewing requirement.
Personal
• To manually configure the
following picture setting to suit
your personal preference or
viewing requirement.
• To adjust the contrast level of
picture.
• To adjust the brightness level of
picture.
• To adjust the edge definition of
picture.
• To adjust the color hue of picture.
• To adjust the color saturation of
picture.
120 Hz, 500 Hz,
1.5 KHz, 5 KHz,
10 KHz, Balance
• Adjust the loudness of 120 Hz
bandwidth.
• Adjust the loudness of 500 Hz
bandwidth.
• Adjust the loudness of 1.5 KHz
bandwidth.
• Adjust the loudness of 5 KHz
bandwidth.
• Adjust the loudness of 10 KHz
bandwidth.
• Adjust the balance between the
left and right speaker.
Surround Sound On, Off
To enable virtual surround effect
through two speaker systems.
The OSD Functions16
Time Scheduling
Item Selection Description
Time Scheduling On, Off
To enable Time Scheduling
Function.
Clock
Year, Month, Day,
Hour, Minute
To set the current time manually.
Work Time Hour, Minute To set ON Time and Off Time.
• After Time scheduling function is activated, the transparent display will always turn on/off
based on your setting until you close the function.
• For further details about this option, please refer to Appendix 1.
The OSD Functions 17
Setup
USB
Item Selection Description
Menu Language
English, Chinese
Traditional, Chinese
Simplified
To select menu displaying language.
Restore Default Yes/No
To restore all setting of menu to
default factory setting.
Software Update
(USB)
Yes/No
To proceed software update via
USB driver (only available for
authorized technician).
Item Selection Description
USB Enter to Media Player mode.
The OSD Functions18
USB Functions
Media Type Select Page
Device Select Page
Item Selection Description
PHOTO Select to show picture type.
MUSIC Select to show music type.
MOVIE Select to show movie type.
Item Selection Description
Return Back to the top level.
ADATA
For USB device names, enter file
select page when selected.
The OSD Functions 19
File Select Page
Item Selection Description
Return Back to the top level.
File name
To show the files of selected types,
select a file to play.
• The transparent display is not able to read the files from the folder in the USB flash drive, so
save the files outside the folder.
• The order to play the files is based on the file name. You can rename the files (ex: 1, 2, 3…) to
have your preferred play list.
• For further information, please refer to Appendix 2.
More Information20
More Information
Supported Video and Photo
Supported Timing Mode
The supported timing modes for VGA signal / HDMI signal are:
Media Type Format
Photo JPG, BMP, PNG
Audio MP3, AAC, WAV, WMA
Video MPEG, MP4
Timing Mode Resolution
720x400@70Hz
VGA
640x480@60Hz
640x480@72Hz
640x480@75Hz
SVGA
800x600@60Hz
800x600@72Hz
800x600@75Hz
XGA
1024x768@60Hz
1024x768@70Hz
1024x768@75Hz
1360x768@60Hz
Video
720p
1080p
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
BenQ TL240C User manual
- Type
- User manual
- This manual is also suitable for
BenQ TL240C transparent display has a 1366 x 768 image resolution, 260 nits brightness, and a 3000:1 contrast ratio. It can be connected to a computer or media player via HDMI, VGA, or DVI cables. The TL240C also has a USB port that can be used to play media files from a USB flash drive. The TL240C can be controlled using the included remote control or the buttons on the side of the display.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
iiyama ProLite LH7542UHS-B3 User manual
-
AG Neovo QM-55 User manual
-
-
-
-
AG Neovo PD-43Q User manual
-
-
NEC MultiSync UX552 Owner's manual
-
NEC UN552V-TMX9P User manual
-
NEC UN462A-TMX4P User manual