Planar SL5551 User manual

Brand: Planar

Model: SL5551

Category: Public displays

Type: User manual

This manual is also suitable for

SL4851

Planar Simplicity Series

www.planar.com

Planar Simplicity Series

Safety Instructions

Warnings and Precautions

KNOW THESE SAFETY SYMBOLS

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK). NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

This symbol indicates high voltage is present inside.

It is dangerous to make any kind of contact with any

inside part of this product.

This symbol alerts you that important literature

concerning operation and maintenance has been

included with this product.

CAUTION: FCC/CSA regulations state that any unauthorized

changes or modications to this equipment may void

the user’s authority to operate it.

CAUTION: To prevent electric shock, match the wide blade of plug

to the wide slot, and fully insert the plug.

TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR ELECTRIC

SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN

OR MOISTURE.

The Socket-outlet should be installed near the apparatus and be easily

accessible.

Read and follow these instructions

when connecting and using your Public

Information Display:

• Unplug the display if you are not going to use it for an extensive

period of time.

• Unplug the display if you need to clean it with a slightly damp cloth.

The screen many be wiped with a dry cloth when the power is off.

However, never use alcohol, solvents or ammonia-based liquids.

• Consult a service technician if the display does not operate normally

when you have followed the instructions in this manual.

• The casing cover should be opened only by qualied service

personnel.

• Keep the display out of direct sunlight and away from stoves or any

other heat sources.

• Remove any object that could fall into the vents or prevent proper

cooling of the display’s electronics.

• Do not block the ventilation holes on the cabinet.

• Keep the display dry. To avoid electric shock, do not expose it to

rain or excessive moisture.

• If turning off the display by detaching the power cable, wait for 6

seconds before re-attaching the power cable for normal operation.

• To avoid the risk of shock or permanent damage to the set do not

expose the display to rain or excessive moisture.

• When positioning the display, make sure the power plug and outlet

are easily accessible.

• IMPORTANT: Always activate a screen saver program during your

application. If a still image in high contrast remains on the screen for

an extended period of time, it may leave an ‘after-image’ or ‘ghost

image’ on the front of the screen. This is a well-known phenomenon

that is caused by the shortcomings inherent in LCD technology. In

most cases the after-image will disappear gradually over a period

of time after the power has been switched off. Be aware that the

after-image symptom cannot be repaired and is not covered under

warranty.

Planar Simplicity Series

iii

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Do not use over 16 hours per day.

7. Clean only with dry cloth.

8. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

9. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including ampliers) that produce heat.

10. Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider than the

other. A grounding type plug has two blades and a third grounding

prong. The wide blade or the third prong are provided for your

safety. If the provided plug does not t into your outlet, consult an

electrician for replacement of the obsolete outlet.

11. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point where

they exit from the apparatus.

12. Only use attachments/accessories specied by the manufacturer.

13. Use only with the cart, stand, tripod, bracket, or

table specied by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid

injury from tip-over.

14. Unplug this apparatus during lightning storms or when unused for

long periods of time.

15. Refer all servicing to qualied service personnel. Servicing is

required when the apparatus has been damaged in any way, such

as power-supply cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has

been dropped.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS APPARATUS TO

RAIN OR MOISTURE.

WARNING: Apparatus shall not be exposed to dripping or splashing

and no objects lled with liquids, such as vases, shall be

placed on the apparatus.

WARNING: The batteries (batteries installed) shall not be exposed

to excessive heat such as sunshine, re or the like.

WARNING: The mains plug or appliance coupler is used as the

disconnect device,the disconnect device shall remain

readily operable.

WARNING: To prevent the spread of re, keep candles or other

open ames away from this product at all times.

WARNING: To prevent injury, this apparatus must be securely

attached to the oor/wall in accordance with the

installation instructions.

WARNING: This equipment is compliant with Class A of EN55032/

CISPR. In a residential environment this equipment may

cause radio interference.

WARNING: This is a class A product. In a domestic environment this

product may cause radio interference in which case the

user may be required to take adequate messures..

CAUTION: These servicing instructions are for use by qualied

service personnel only. To reduce the risk of electric

shock,do not perform any servicing other than that

contained in the operating instructions unless you are

qualitied to do so.

CAUTION: Excessive sound pressure from earphones and

headphones can cause hearing loss. Adjustment of the

equalizer to maximum increases the earphone and

headphone output voltage and the sound pressure level.

Therefore, to protect your hearing, adjust the equalizer

to an appropriate level.

NOTE: This equipment has been tested and found to comply

with the limits for a Class A digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference when the equipment is operated in a

commercial environment This equipment generates,

uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction

manual, may cause harmful interference to radio

communications. Operation of this equipment in a

residential area is likely to cause harmful interference

in which case the user will be required to correct the

interference at his own expense.

Planar Simplicity Series

Instructions de sécurité

Avertissements et mises en garde

CONNAÎTRE CES SYMBOLES DE SÉCURITÉ

ATTENTION

RISQUE D'ÉLECTROCUTION

NE PAS OUVRIR

ATTENTION : POUR RÉDUIRE LE RISQUE DE CHOC

ELECTRIQUE, NE PAS ENLEVER LE COUVERCLE (OU LE

CAPOT ARRIÈRE). AUCUNE PIECE UTILISABLE NE SE

TROUVE A L’INTERIEUR. CONTACTER UN TECHNICIEN

QUALIFIE POUR LES REPARATIONS.

ATTENTION : POUR RÉDUIRE LE RISQUE DE CHOC

ELECTRIQUE, NE PAS ENLEVER LE COUVERCLE

(OU LE CAPOT ARRIÈRE). AUCUNE PIECE

UTILISABLE NE SE TROUVE A L’INTERIEUR.

CONTACTER UN TECHNICIEN QUALIFIE POUR

LES REPARATIONS.

Ce symbole indique la présence d'un courant haute

tension à l'intérieur. Il est dangereux de toucher

n’importe quel composant à l'intérieur de ce produit.

Ce symbole vous avertit que des documents

importants concernant le fonctionnement et

l'entretien ont été fournis avec ce produit.

ATTENTION : Les règlements FCC/CSA indiquent que tous

changements ou modications non autorisés peut

annuler l’autorité de l’utilisateur à l’utiliser.

ATTENTION : Pour éviter les chocs électriques, insérez la lame la plus

large de la che dans la borne correspondante de la

prise et enfoncez-la jusqu’au fond.

POUR EVITER TOUT DOMMAGE POUVANT CAUSER UN

INCENDIE OU UN CHOC ELECTRIQUE, FAITES ATTENTION A NE

PAS EXPOSER CET APPAREIL A LA PLUIE OU A L’HUMIDITE.

La prise de courant doit être située près de l’appareil et doit être

facilement accessible.

Lisez et suivez ces instructions lorsque

vous connectez et utilisez votre Moniteur

d'information du public :

• Débranchez le moniteur si vous n’allez pas l’utiliser pendant une

longue période de temps.

• Débranchez le moniteur si vous voulez le nettoyer ; utilisez

uniquement un chiffon légèrement humide. L’écran peut être essuyé

avec un chiffon sec lorsqu’il est éteint. Cependant n’utilisez jamais de

l’alcool, des solvants ou des liquides à base d’ammoniaque.

• Consultez un technicien de service si le moniteur ne marche pas

normalement lorsque vous avez suivi les instructions de ce manuel.

• Le boîtier ne doit être ouvert que par un technicien qualié.

• Gardez le moniteur à l’abri du soleil et des poêles ou toute autre

source de chaleur.

• Enlevez les objets qui pourraient tomber dans les fentes de

ventilation ou obstruer le refroidissement des composants

électroniques du moniteur.

• N’obstruez pas les fentes de ventilation du boîtier.

• Gardez le moniteur au sec. Pour réduire le risque d’incendie, évitez

de l’exposer à la pluie ou à une humidité excessive.

• Si vous éteignez le moniteur en débranchant le cordon

d’alimentation, attendez au moins 6 secondes avant de rebrancher

le câble d’alimentation pour l’utiliser.

• Pour réduire le risque d’électrocution ou de dommage irréparable

au moniteur, ne l’exposez pas à la pluie ou à une humidité excessive.

• Lors de la mise en place du moniteur, veillez à ce que la che

d’alimentation et la prise soient facilement accessibles.

• IMPORTANT : Utilisez toujours un programme d’économiseur

d’écran pendant votre application. Si une image à fort contraste

reste afchée sur l’écran pendant une longue période de temps,

elle peut laisser un « image résiduelle » ou une « image fantôme »

sur la partie frontale de l’écran. Ceci est un phénomène bien connu

qui est causé par des défauts propres à la technologie LCD. Dans la

plupart des cas, l’image fantôme disparaîtra graduellement sur une

certaine période de temps une fois que l’alimentation a été coupée.

Souvenez-vous que le problème qui cause des images fantômes ne

peut pas être réparé et n’est donc pas couvert par la garantie.

Planar Simplicity Series

Précautions de sécurité importantes

1. Lisez ces instructions.

2. Conservez ces instructions.

3. Prenez en compte tous les avertissements.

4. Suivez toutes les instructions.

5. N’utilisez pas cet appareil près de l’eau.

6. Ne pas utiliser plus de 16 heures par jour.

7. Nettoyez l’appareil uniquement avec un chiffon sec.

8. Ne bloquez pas les orices de ventilation. Installez l’appareil en

suivant les instructions du fabricant.

9. N’installez pas l’appareil près d’une source de chaleur telle qu’un

radiateur, une chaudière, une cuisinière ou un autre appareil (y

compris des amplicateurs) produisant de la chaleur.

10. N’invalidez pas les caractéristiques de sécurité de la che polarisée

ou avec mise à la terre. Une che polarisée possède deux broches,

une plus large que l’autre. Une che avec mise à la terre possède

deux broches et une troisième broche de mise à la terre. La lame

large et la troisième broche de mise à la terre ont été faites pour

des raisons de sécurité. Si la che ne se branche pas dans la prise,

consultez un électricien pour faire remplacer la prise.

11. Protégez le cordon d’alimentation et empêchez qu’il soit piétiné, ou

pincé, particulièrement au niveau de la prise secteur murale et de la

sortie de l’appareil.

12. Utilisez uniquement des dispositifs auxiliaires/accessoires spéciés

par le fabricant.

13. Utilisez uniquement avec un chariot, socle, trépied,

support ou table spécié par le fabricant ou vendu

avec l’appareil. Si vous utilisez un chariot, faites

attention lors du déplacement du chariot pour

éviter tout risque de blessures.

14. Débranchez l’appareil pendant un orage ou lorsqu’il ne doit pas

être utilisé pendant une période prolongée.

15. Pour toute réparation, consultez une personne qualiée. L’appareil

doit être réparé s’il a été endommagé de n’importe quelle façon,

comme quand, par exemple, le cordon ou la che d’alimentation

est endommagé, un liquide ou un objet a pénétré à l’intérieur

de l’appareil, l’appareil a été exposé à la pluie ou l’humidité, ne

fonctionne pas normalement ou est tombé.

AVERTISSEMENT: POUR RÉDUIRE LE RISQUE D’INCENDIE ET

DE CHOC ÉLECTRIQUE, VEUILLEZ NE PAS

EXPOSER CET APPAREIL À LA PLUIE OU À

L’HUMIDITÉ.

AVERTISSEMENT: Gardez cet appareil à l’abri de l’eau et de tout autre

liquide ; aucun objet contenant de l’eau, tel qu’un

vase, ne doit être posé sur cet appareil.

AVERTISSEMENT: N’exposez jamais les piles (les piles installées) à une

chaleur intense comme en plein soleil, le feu ou

autre.

AVERTISSEMENT: La prise principale ou le coupleur de l’appareil est

utilisé pour couper l’alimentation à l’appareil ; ceux-

ci doivent donc rester facilement accessibles à tout

moment.

AVERTISSEMENT: Pour éviter la propagation du feu, éloignez toujours

les bougies et autres ammes nues de ce produit.

AVERTISSEMENT : Pour éviter toute blessure, cet appareil doit être

solidement xé au plancher/au mur selon les

instructions d’installation.

AVERTISSEMENT : Cet équipement est conforme à la classe A

d’EN55032/CISPR 32. Dans un environnement

résidentiel, cet équipement peut provoquer des

interférences radio.

AVERTISSEMENT : Il s’agit d’un produit de classe A. Dans un

environnement domestique, ce produit peut

générer des interférences radio, auquel cas

l’utilisateur devra prendre les mesures adéquates.

ATTENTION : Les instructions d’entretien suivantes sont destinées au

personnel d’entretien seulement. Pour réduire le risque

de choc électrique, n’effectuez jamais des entretiens qui

ne sont pas expliqués dans le manuel de l’utilisateur, à

moins que vous ne soyez qualié à le faire.

ATTENTION : Un volume sonore excessif des écouteurs ou du casque

est susceptible de provoquer des pertes auditives. Un

réglage de l’égaliseur au maximum augmente la tension

en sortie dans les écouteurs ou le casque et de ce fait

augmente le niveau de pression sonore. Donc, pour

protéger vos oreilles, ajustez l’égaliseur à un niveau

approprié.

REMARQUE: Cet appareil a été testé et déclaré conforme aux limites

dénies pour les appareils numériques de Classe A

suivant l’article 15 du règlement de la FCC. Device,

pursuant to part 15 of the FCC Rules. Ces limites

sont conçues pour fournir une protection raisonnable

contre les interférences nuisibles dans les installations

commerciales. Protection against harmful interference

when the equipment is operated in a commercial

environment. Cet appareil génère, utilise et peut diffuser

des fréquences radioélectriques et, s’il n’est pas installé

et utilisé conformément au manuel d’instructions du

fabricant, il peut causer des interférences nuisibles aux

communications radio. L’utilisation de cet appareil dans

un environnement résidentiel est susceptible de causer

des interférences nuisibles et, le cas échéant, il sera la

responsabilité de l’utilisateur de prendre des mesures

adéquates pour éliminer ces interférences.

Planar Simplicity Series

Important Waste Disposal Information

Please recycle or dispose of all electronic waste in accordance with

local, state, and federal laws. Additional resources can be found online at

http://www.planar.com/about/green/.

The crossed-out wheelie bin symbol is to notify consumers in areas

subject to Waste Electrical and Electronic Equipment (WEEE) Directive

2012/19/EU that the product was placed on the market after August 13,

2005 and must not be disposed of with other waste. Separate collection

and recycling of electronic waste at the time of disposal ensures that

it is recycled in a manner that minimizes impacts to human health and

the environment. For more information about the proper disposal of

electronic waste, please contact your local authority, your household

waste disposal service, or the seller from whom you purchased the

product.

Planar Simplicity Series

vii

Table Of Contents

1. UnpackingandInstallation.......................................................1

1.1. Unpacking .........................................................................................1

1.2. Package Contents ........................................................................ 1

1.3. Installation Notes .........................................................................1

1.4. Mounting on a Wall ....................................................................2

1.5. IR Remote Sensor and Power Status Indicator ..........3

1.6. Mounting in Portrait Position ..............................................3

2. PartsandFunctions...................................................................4

2.1. Control Panel ................................................................................. 4

2.2. Input/Output Terminals .............................................................6

2.3. Remote Control ........................................................................... 8

2.3.1. General functions .....................................................8

2.3.2. Inserting the batteries in the remote

control.............................................................................9

2.3.3. Handling the remote control .............................9

2.3.4. Operating range of the remote control ......9

3. ConnectingExternalEquipment.......................................... 10

3.1. Connecting External Equipment (DVD/VCR/

VCD) ...............................................................................................10

3.1.1. Using COMPONENT video input .............. 10

3.1.2. Using Video Source input ..................................11

3.1.3. Using HDMI video input ...................................12

3.2. Connecting a PC ....................................................................... 13

3.2.1. Using VGA input .....................................................13

3.2.2. Using DVI input ......................................................14

3.3. Connecting Audio Equipment ...........................................15

3.3.1. Connecting an external audio device ........15

3.4. Display control connection ................................................. 15

3.5. IR connection ............................................................................16

3.6. IR Pass-through Connection ...............................................16

3.7. Connecting Display to the Network .............................17

3.8. Connecting Display to a Wireless Device .................. 17

4. Operation................................................................................. 18

4.1. Change Aspect Ratio .............................................................. 18

4.2. Play Multimedia Files ...............................................................18

4.2.1. Play les from computer ...................................18

4.2.2. Play multimedia les from USB device ......18

4.3. Play options .................................................................................. 19

4.3.1. Playing music les ..................................................19

4.3.2. Playing movie les .................................................19

4.3.3. Playing photo les .................................................20

5. Changeyoursettings............................................................. 21

5.1. Settings ............................................................................................21

5.1.1. Picture menu ............................................................ 21

5.1.2. Sound menu .............................................................22

5.1.3. General settings menu ........................................23

5.2. Network Settings ......................................................................25

6. USBdevicecompatibility....................................................... 26

7. InputMode............................................................................... 28

8. CleaningandTroubleshooting.............................................. 29

8.1. Cleaning ..........................................................................................29

8.2. Troubleshooting .........................................................................30

9. TechnicalSpecications......................................................... 31

9.1. Planar Simplicity SL4351 .......................................................31

9.2. Planar Simplicity SL4851 .......................................................33

9.3. Planar Simplicity SL5551 .......................................................35

9.4. Planar Simplicity SL6551 .......................................................37

Planar Simplicity Series

1. Unpacking and Installation

1.1. Unpacking

• This product is packed in a carton, together with the standard accessories.

• Any other optional accessories will be packed separately.

• Due to the size and weight of this display it is recommended for two people to move it.

• After opening the carton, ensure that the contents are complete and in good condition.

1.2. Package Contents

Please verify that you received the following items with your package content:

• LCD display

• Quick Start Guide

• Remote control with AAA batteries

• Power cord (1.8 m)

• HDMI cable (1.8 m)

• RS232 cable (1.8 m)

• Cable clamps (2)

Remote Control

and AAA Batteries

HDMI Cable

RS232 Cable

Power Cord

Cable Clamps (2)

Quick Start Guide

NOTES:

• For all other regions, apply a power cord that conforms to the AC voltage of the power socket and has been approved by and complies with the

safety regulations of the particular country.

• You might like to save the package box and packing material for shipping the display.

1.3. Installation Notes

• Due to the high power consumption, always use the plug exclusively designed for this product.

• The product should be installed on a at surface to avoid tipping. The distance between the back of the product and the wall should be maintained

for proper ventilation. Avoid installing the product in the kitchen, bathroom or any other places with high humidity so as not to shorten the service life

of the electronic components.

• The product can normally operate only under 3000m in altitude. In installations at altitudes above 3000m, some abnormalities may be experienced.

Planar Simplicity Series

1.4. Mounting on a Wall

To mount this display to a wall, you will have to obtain a standard wall-mounting kit (commercially available). We recommend using a mounting interface

that complies with TUV-GS and/or UL1678 standard in North America.

Planar SL4351/SL4851/SL5551

Protective Sheet

VESA Grid

Table

Planar SL6551

Protective Sheet

VESA Grid

Table

1. Lay a protective sheet on a table, which was wrapped around the display when it was packaged, beneath the screen surface so as not to scratch the

screen face.

2. Ensure you have all accessories for mounting this display (wall mount, ceiling mount, table stand, etc).

3. Follow the instructions that come with the base mounting kit. Failure to follow correct mounting procedures could result in damage to the equipment

or injury to the user or installer. Product warranty does not cover damage caused by improper installation.

4. For the wall-mounting kit, use M6 mounting screws (having a length 10 mm longer than the thickness of the mounting bracket) and tighten them

securely.

Planar Simplicity Series

Ventilation requirements for enclosure

To allow heat to disperse, leave space between surrounding objects as shown in the diagram below.

10 mm 10 mm

10 mm

1.5. IR Remote Sensor and Power Status Indicator

1. For optimal IR remote control performance, pull out the retractable lens from the backside of the display. The LED power status light is also best

viewed when the lens is pulled out.

2. You will hear a click when the lens is fully in position.

Push in to collapse the lens

Push out to extend the lens

SL4351/SL4851/SL5551 SL6551 SL4351/SL4851/SL5551 SL6551

1.6. Mounting in Portrait Position

This display can be installed in portrait position. Rotate 90 degrees clockwise from the back side of the display. The terminals will be on the left and

bottom sides of the user from the back of the display.

Planar Simplicity Series

2. Parts and Functions

2.1. Control Panel

Planar SL4351/SL4851/SL5551

1 2 3 4 5 6 7 8

MUTE INPUT

Planar SL6551

1 2 3 4 5 6 7 8

MUTE INPUT

Planar Simplicity Series

[ ] button

Use this button to turn the display on or put the display to standby.

[MUTE] button

Switch the audio mute ON/OFF.

[INPUT] button

Choose the input source.

• Used as [ ] button in the On-Screen-Display menu.

[ ] button

Move the highlight bar up / Increase the adjustment while OSD menu is on, or increase the audio output level while OSD menu is off.

[ ] button

Move the highlight bar down / Decrease the adjustment while OSD menu is on, or decrease the audio output level while OSD menu is off.

[ ] button

Move the highlight bar up to adjust the selected item while OSD menu is on.

[ ] button

Move the highlight bar down to adjust the selected item while OSD menu is on.

[MENU] button

Return to previous menu while OSD menu is on, or to activate the OSD menu when OSD menu is off.

Planar Simplicity Series

2.2. Input/Output Terminals

Planar SL4351/SL4851/SL5551

3 4

Y Pb Pr

LRL R

INOUTRJ45IN

USB

OUT

Planar SL6551

3 4

7 8 9

Y Pb Pr

LRL R

OUTRJ45

USB

OUT

Planar Simplicity Series

MAIN POWER SWITCH

Switch the main power on/off.

AC IN

AC power input from the wall outlet.

PC AUDIO IN

Audio input from VGA source (3.5mm stereo phone).

HDMI IN

HDMI video / audio input.

DVI IN

DVI-D video input.

VGA IN (D-Sub)

VGA video input.

COMPOSITE/COMPONENT VIDEO

Video source input.

AUDIO IN

Audio input from external AV device (RCA).

AUDIO OUT

Audio output to external AV device.

IR OUT /

IR IN

IR signal output /input for the loop-through function.

NOTES:

• This display’s remote

control sensor will stop working if the jack

[IRIN] is connected.

• To remotely control your A/V device via this display, refer to

page 16 for IRPassThrough connection.

LAN

LAN control function for remote control from a network.

RS232 OUT /

RS232 IN

RS232C network output / input for the loop-through function.

USB PORT

Connect your USB storage device.

Security LOCK

Used for security and theft prevention.

Planar Simplicity Series

2.3. Remote Control

2.3.1. General functions

[ ] POWER button

Turn the display on or to put the display into standby mode.

[PLAY] buttons

Control playback of media les.

[ ] SOURCE button

Choose input source. Press [ ] or [ ] button to choose from

USB

Network

HDMI

DVI

YPbPr

, or

VGA

. Press

[ ] button to conrm and exit.

[ ] HOME button

Access the OSD menu.

[ ] LIST button

Not applicable.

[ ] [ ] [ ] [ ] NAVIGATION buttons

Navigate through menus and choose items.

[ ] button

Conrm an entry or selection.

[ ] ADJUST button

Access currently available options, picture and sound menus.

[ ] BACK button

Return to the previous menu page or exit from the previous

function.

[ ] [ ] VOLUME button

Adjust volume.

[ ] MUTE button

Press to turn the mute function on/off.

[ ] [ ] [ ] [ ] COLOR buttons

Select tasks or options for media player.

[NUMERIC] buttons

Enter text for network setting.

[ ] FORMAT button

Change aspect ratio.

[ ] INFO button

View info about the display.

[ ] OPTIONS button

Access currently available options, picture and sound menus.

Planar Simplicity Series

2.3.2. Inserting the batteries in the remote control

The remote control is powered by two 1.5V AAA batteries.

To install or replace batteries:

1. Press and then slide the cover to open it.

2. Align the batteries according to the (+) and (–) indications inside the

battery compartment.

3. Replace the cover.

Caution:

The incorrect use of batteries can result in leaks or bursting. Be sure to follow these instructions:

• Place “AAA” batteries matching the (+) and (–) signs on each battery to the (+) and (–) signs of the battery compartment.

• Do not mix battery types.

• Do not combine new batteries with used ones. It causes shorter life or leakage of batteries.

• Remove the dead batteries immediately to prevent them from liquid leaking in the battery compartment. Don’t touch exposed battery acid, as it can

damage your skin.

NOTE: If you do not intend to use the remote control for a long period, remove the batteries.

2.3.3. Handling the remote control

• Do not subject to strong shock.

• Do not allow water or other liquid to splash the remote control. If the remote control gets wet, wipe it dry immediately.

• Avoid exposure to heat and steam.

• Other than to install the batteries, do not open the remote control.

2.3.4. Operating range of the remote control

Point the front of the remote control toward this display’s remote control sensor when pressing a button.

Use the remote control within a distance of less than 5m/16ft from this display’s sensor, and a horizontal and vertical angle of less than 30 degrees.

NOTE: The remote control may not function properly when the remote control sensor on this display is under direct sunlight or strong illumination, or

when there is an obstacle in the path of signal transmission.

30 30

SL4351/SL4851/SL5551 SL6551

2.4. RS232 Control

See www.planar.com for the Planar

Simplicity

RS-232 manual.

Planar Simplicity Series

2.5. LAN Control

The Planar Simplicity Series supports extending access to the RS232 commands over a network connection. Below are the steps to follow for controlling

the display over LAN through the RJ45 connector:

1. Connect display & PC to hub or connect display to PC with LAN cable directly.

2. SET display IP address

Step 1: In Network Settings menu, select ”Network conguration”->”Static IP”

Step 2: Then go to “Static IP conguration” and enter the pertinent information.

Step 3: “View network settings” to check IP address

3. Commands are sent via TCP connection to port 5000. The commands are the same as for the RS232 port (see Simplicity RS-232 manual on www.

planar.com).

4. You can test commands using any TCP utility program that allows you to enter binary data in hexadecimal format. (Note: Contact Planar Technical

Support for recommended programs.)

3. Connecting External Equipment

3.1. Connecting External Equipment (DVD/VCR/VCD)

3.1.1. Using COMPONENT video input

AC IN

LRL R

INOUTRJ45IN

USB

OUT

HDMI IN DVI IN COMPONENT INVGA INPC Line IN

Y Pb Pr

L R

OUTRJ45

USB

OUT

HDMI IN DVI IN VGA INPC Line IN

AC IN

SL4351/SL4851/SL5551

SL6551

DVD / VCR / VCD

[AUDIO IN]

[COMPONENT IN]

(YPbPr)

COMPONENT Out

(YPbPr)

Audio Out

[R]

[L]

[AUDIO IN]

[COMPONENT IN]

(YPbPr)

COMPONENT Out

(YPbPr)

Audio Out

[R]

[L]

Planar Simplicity Series

3.1.2. Using Video Source input

SL4351/SL4851/SL5551

DVD / VCR / VCD

[AUDIO IN]

Audio Out

[R]

[L]

AC IN

LRL R

INOUTRJ45IN

USB

OUT

HDMI IN DVI IN COMPONENT INVGA INPC Line IN

DVD / VCR / VCD

[AUDIO IN]

[Y/CVBS IN]

Y/CVBS Out

[R]

[L]

[Y/CVBS IN]

Y/CVBS Out

AC IN

Y Pb Pr

L R

HDMI IN DVI IN VGA INPC Line IN

SL6551

OUTRJ45

USB

OUT

Planar Simplicity Series

3.1.3. Using HDMI video input

SL4351/SL4851/SL5551

AC IN

Y Pb Pr

L R

HDMI IN DVI IN VGA INPC Line IN

SL6551

OUTRJ45

USB

OUT

AC IN

LRL R

INOUTRJ45IN

USB

OUT

HDMI IN DVI IN COMPONENT INVGA INPC Line IN

HDMI Out

[HDMI IN]

HDMI

Planar Simplicity Series

3.2. Connecting a PC

3.2.1. Using VGA input

SL4351/SL4851/SL5551

AC IN

Y Pb Pr

L R

HDMI IN DVI IN VGA INPC Line IN

SL6551

OUTRJ45

USB

OUT

AC IN

LRL R

INOUTRJ45IN

USB

OUT

HDMI IN DVI IN COMPONENT INVGA INPC Line IN

[VGA IN]

[VGA AUDIO IN]

VGA Out

D-Sub 15 pin

Audio Out

[VGA IN]

[VGA AUDIO IN]

VGA Out

D-Sub 15 pin

Audio Out

Page is loading ...

Planar SL5551 User manual

Brand: Planar

Model: SL5551

Category: Public displays

Type: User manual

This manual is also suitable for

SL4851

Download PDF

report

in other languages

français: Planar SL5551 Manuel utilisateur

Planar SL5551 User manual

This manual is also suitable for

Planar SL5551 User manual

in other languages

Related papers

Other documents