Dinan D760-3600A Operating instructions

865 Jarvis Drive  Morgan Hill, CA 95037  Tel: (408) 779-8584  Fax: (408) 779-8674

HIGH PERFORMANCE THROTTLE BODY

INSTALLATION INSTRUCTIONS

Part Number: D760-3600A

Applications: 2004-05 545i 2004-06 X5 4.4i

Valvetronic 2005 645i 2005-06 X5 4.8i

2003-05 745i, iL

Please Note: Check the Dinan throttle body for a “V” stamped on the

casting. If there is no “V” stamped on the throttle body, stop and call

Dinan before you proceed with the installation.

Some mechanical skill is required to install this throttle body. Proper installation

of this throttle body also requires complete understanding of the recommended

BMW throttle body removal procedure for your vehicle. If you are not familiar

with this BMW procedure, we strongly recommend that you arrange for a

qualified BMW repair facility to perform this installation.

If you encounter any difficulties during installation, or if these instructions are not

clear to you, please call Dinan Engineering’s Technical Support Staff @ (408)

779-8584.

INSTALLATION:

1. Remove and install the original throttle body following recommended BMW

procedure for throttle body replacement.